Weavalong (not verified)

Thanks Laurie - I'll get along to see Peter Collingwood's work. It's amazing (2 hours later)

I have done a bit of what you say already and very pleased to say my "The Handweavers Pattern Directory"( Anne Dixon) arrived yesterday. Its amazing to see what can be done on a 4 shaft loom. It's inspiring.

 

Since my last post my loom table and treadle set arrived. Can't say the treadles are easy to use. Using the levers became second nature and its already hard to change. Tut tut.  As a novice, warping is still an ordeal - please tell me it gets easier. I couldn't figure out the warping frame so cut 140 7' warp threads for my loom. The threads got horribly tangled while the warping frame sits idle in the corner.

 

My next lesson is in ten days fortunately, where hopefully my patient teacher will take me step by step through the warping frame and how to use it properly.

 

My loom, now warped in rainbow colours Petra 5 (similar to DMC) about 8" wide and 7' long and its time to weavealong to my music again. Hooray!

lkautio (not verified)

Cutting individual threads is certainly about the hardest way to warp that I can think of.  I commend you on having the determination and persistence to make it work! Any good beginner book for 2 shafts or more should have pictures of how to use a warping board. 

Make a guide thread the length you need and go across the top, then back and forth from side to side, and perhaps down one side until you reach a peg to end on.  You are making a zigzag, which may have a little tail.

You will find three pegs in a row, usually at the top of the board.  The yarn will travel a figure 8 around these peg, forming the full figure 8 on a complete pass (down and back).  The midpoint of the figure 8 is called the cross.  If you look down on the top of the cross you will see that the threads alternate with one going down then up, and the next going up then down.  The cross is what keeps the threads in order and makes warping so much easier.

Use a counting thread as you warp.  Lay a longish piece of yarn in contrasting color behind the first thread.  After the number of threads in an inch (of half inch), bring the ends of the thread to the front, cross them, and push them to the back.  This separates the warp into little bundles, making it easy to spread in a raddle if you are warping back to front, and keeping them from tangling.  It is an easy way to keep track of the bundles you use.

When you are done you tie specific areas of the warp.  One tie goes through the first and last peg, to preserve the loops.  Put 4 ties on the cross (one on each arm) to preserve it.  Add a tight tie (choke tie) a ways past the cross, and a looser tie every yard or so. 

Weaving with treadles and warping are much faster when you get used to it.

This post probably should be in Weaving 101 but I don't know how to cross-link.  Sorry.  Have fun weaving!

Laurie Autio

Weavalong (not verified)

Thanks Laurie,

 

Yes, I guess this is a 101 matter. I took a look at the websites and books you suggested and found Collingwood's work very interesting indeed. It reminded me of Sunfilter curtains that were the rage in the '60's. My primary interest is weaving something for my windows using a lacy or open design.

I'll definitely give warping another go tomorrow and do as you suggest with the contrasting yarn and use my treadles.

 

 

 

 

Geri (not verified)

Hi.. I am a rather new weaver shopping for a good used loom.  Someone fairly close to where I live in Oregon is selling a Murphy 4-shaft counterbalance loom with a 32" weaving width.  I won't be able to see it to make a decision until early March.  The current owner doesn't have much information about the loom and I am unable to locate much on the 'net.  If anyone has knowledge or experience with a Murphy loom, I would love to know more.

Thanks

sewwhatsports (not verified)

I am Rena (aka sewwhatsports) and I am a fairly new weaver, 5 months. I have 2 looms, a 22" Harrisville 4harness/4 treadle that I have warped for a class in 2 weeks with Bonniye Inouye and a 48" Macomber 4H/6T that can be expanded to 16 treadles. It is warped with kitchen towels for my daughter and is my pride and joy. I love weaving on her. The class I am taking a class with Bonnie is her advancing twills and though I am a bit nervous (I will be the newest weaver and the one with the least experience she has ever had in class), I am excited to learn new things. I am signed up for the Mid-Atlantic Fiber Association (MAFA) conference in July and hope I got my first choice of Extreme Warp Makeovers with Robyn Spady.

B P (not verified)

Hi, I'm Beth from the UK. I weave on a 16 shaft Louet Megado, BUT, as I am newish to weaving, and am unfamiliar with many of the weave structures, I often like to start on 4 shafts.

.......Rachel, a 4 shaft weave along sounds like a great idea, we can all learn from one another!

Is anyone else interested in a Weave-along?

Beth

lkautio (not verified)

Paul, the questions you ask are better suited to the "Weaving 101" group. It's a great place to ask about learning to read a draft and the basics of 4 shaft weaving. There may be an ecclesiastical group as well.

The short answer to your question is that there are a lot of ways to do what you want, from tapestry techniques, to inlays, soumak, and brocades, to repp weaves, summer and winter, and various on opposite treadlings of other weaves.  Some of these may be familiar from backstrap weaving, others will be new to you. 

A good beginners book for 4 shaft weavers will be very helpful.  Drafts are not hard to read once you look at them as a set of instructions for the loom. 

[Long Answer] There is usually a horizontal bar which is as many blocks high as there are shafts on your loom.  It may be at the top or bottom of the draft.  It shows you the order in which the heddles are threaded. 

In the top or bottom right side there may be a small square or rectangular grid, called the tie-up.  If it is there, it shows which shafts are always lifted together.  It will have a different column for each combination (14 possible on 4 shafts, but often limited to 6). Each column is a treadle, each row is a shaft.

Then, there is a strip of grid down the right side for the treadling.  Each row is one pick (weft thread). Each column will correspond to a treadle, showing you the order of the lifts in the tie-up. Sometimes two or more treadles may be pressed together to make more combinations than are shown in the tie-up.  If there is no tie up, each column will just be a shaft and every shaft lifted in that pick will be shown in a given row (this format is called a lift plan).

Last, the large area, called the drawdown, shows you how the pattern created by this threading, tie-up, and treadling looks.  The usual convention is that a black box indicates a warp thread on the front surface of the cloth, and an empty or white box is a weft thread.  Sometimes the actual colors of the cloth are shown.

A simplified version, called a profile draft, does not show the individual threads, just where there is pattern and background occuring.

Laurie Autio

Peg.Cherre (not verified)

I have 2 floor looms, but my preferred is a handmade (not from a kit or any design I've seen before) 4H counterbalance.  I live in very rural, western New York State - about 80 miles southeast of Buffalo.

I don't know if I'll always be able to participate in the WAL, since I'm constantly weaving things for sale, but I'd love to try. 

B P (not verified)

Paulz, where abouts do you live in the UK? Perhaps there is a weaving class or Guild near to you, that you could join.

http://www.wsd.org.uk/ is the web address of the UK weaving, Spinning and Dyeing Guilds.

For a weave-along I guess we need to know how many weavers would be interested. I've never done a weave-along before.....how is one organized? Any helpful suggestions anyone?

Beth

Aunt Janet (not verified)

Draw strings on my pants, or bags, strap for my mandolin, trim work on clothing, bag handles, seam binding on handwoven fabric clothing, book marks, ties on gifts, dog leashes.  That is just what I've used my bands for.  There are many more uses that I can think of ,and I'm sure you can too.  The more I weave them, the more uses pop up.