jeanne (not verified)

I had a couple of ideas last night about hemming a band that's off the loom.

If you are going to sew with a straight stitch, begin and end your stitching in the middle of the band. this way you can draw in the warps at the sides a bit, and you won't have a mess of threads at the selvedge.

If you try this on a machine and you have loose fringe, the fringe is going to splay out and/or get chomped up by the feed dogs of the machine. You can straighten the fringes and tape them to a piece of card or heavy paper before sewing to keep them from flying about.

Once you've managed to get a seam with the edge warps drawn in a bit, you can cut the fringes close to the seam. This always scares me a bit. A rotary cutter or really really sharp scissors work best, and sometimes a bit of fray-check-type stuff is helpful to stop any unravelling. You can also saturate the cutting line with it and let it dry before cutting.

Where you have a warp-faced band, much of the bulk is the warp itself, so you just have to deal with it. There's an old tailor's trick: you can flatten the end with a hammer (really!) and hope that the flattening will not splay out the edges again. Haven't done this myself, but it's probably worth a try. I'd draw the hem in really tight and use lots of fray check!

When weaving a narrow piece with fringe, I've found that weaving the first weft into the second shed, and sewing the last weft back into the previous shed seems to be enough to stabilize the ends, if you're making something like a bookmark with fine threads. Anything more heavy-duty I end up sewing on the machine afterwards. That's not pretty though. There's a book called "A Compendium of finishing techniques," by Naomi McEnnely, which has many ideas (especially a bound fringe!) that look interesting. Must plan ahead to try these while the band is still on the loom!

 

jeanne (not verified)

LaVerne,

I'm looking at the current "Shuttle. Spindle and Dyepot", and there's a picture of  a woman weaving a tubular backstrap band onto the edge of a backstrap-woven cloth. Perhaps she's joining two pieces together. The band has a protective "eye" pattern and it's lovely. Have you seen anyone in your travels weaving on a band like this? The picture was taken in Chinchero.

Jeanne

jeanne (not verified)

LaVerne,

Yes, that is it! The "eye" design is supposed to have protective properties.

It's a really lovely finish.

The article in SS&D is "The center for Traditional Textiles of Cusco,Peru," and it it written by Sandra Swarbrick..  I'm not sure if you can access it on the HGA website. It's a general article about the center, but that picture grabbed my eye.

 

Jeanne

 

 

claudia (not verified)

Hi Laverne,

I love the strap with the "eye" in the middle.  Did you post directions for doing that on Weavolution?  I would love to learn how to do that to add to some of my purses.

Claudia

Bonnie Datta (not verified)

For a really interesting presentation about protective devices in textiles visit

Saul Barodofsky on “Nazarlik”

This is the latest presentation in a long series that are done in Washington DC and are very generously shared through the efforts of R. John Howe.  The entire series can be accessed at:

http://rjohnhowe.wordpress.com/

You can sign up to get an email alert when a new one is posted.  I so look forward to these.

Bonnie.

 


 

rose Goldielocks (not verified)

Thanks so much! I enjoyed reading about all the different designs

This allows me to 'visit' musuems that I normally would not get to, and because the photographer is sensitive to textile artists, they give usefull closeup pictures. (the parts that I might want to see!)

 

Sharon

siseltikva (not verified)

Hi! I just thought I'd update you with what I ended up finishing my pencil pouch warp with. I ended up using a button-hole stitch, I think, even though I was trying to do the hem-stitch :P I then trimmed the fringe to about 1/4 of an inch, and turned the edge under and secured it with a backstitch. It seems pretty solid, so I'm hoping it'll hold.

I posted these on my project page, but I'll post them here too.

Awkward button-hold stitch.

I ran out of my teal warp, so I had to switch to using the white cotton :)

Backstitch  The underside

Backstitch & underside of the backstitch/hemstitch.

rose Goldielocks (not verified)

your stiching looks great! I like the contrast of the white/teal. Pretty much, as long as you use the same thread as in your project, you can sew with any color thread and it looks 'right'.

and if you gave it the old 'tug' test while you were sewing to make sure the sewing was put in tight, it should last the life of the pouch. If the white thread truely bothers you,  there is the "Pretty Women movie "solution  to white thread on black shoes.. sharpie magic marker (they now come in amazing colors!) but please don't. .

siseltikva (not verified)

Thank you! Hehe I loved your idea about the sharpie marker :) too funny. I'm pretty happy with the way it turned out, so I think I'll keep the white thread ;) 

francorios (not verified)

I don't know exactly how this works, but here is my guess.

When I post the article on my free blog hosted at "blogspot.com" I upload pictures to the blog website.

I try to make a "small" file before I upload, under 100K if possible by using a phototool to reduce file size.

Then I upload to the blogspot, using the "small" picture feature.

Blogspot takes the full picture and stores it on a "photobucket" type of file area.

When blogspot displays the blog article, it uses a small version of the uploaded file. The uploaded file image  is usually bigger than the blog display. I found that if a user clicks on the picture, they get sent to the larger "photobucket" image.  Then they can "backspace" to get back to the blog.

This seems to be Weavolution compatible. I can highlight and paste the whole article with pictures on Weavolution.

So I'm not sure how the magic works, I'm just glad it works.

Have a good day!