Ellen (not verified)

Thanks for sharing a very useful trick of the trade. I'll certainly keep that in mind.

Cathos (not verified)

 I've used a piece of shaped laminated paper before now as a reed hook. I'll definitely have to try thin brass if I come across some.

Loominaria (not verified)

Gently pounding metal with a nylon mallet (normally for wire jewellery) will stiffen it.  But hammering wire over wire tends to break one of the wires, so slow and gentle.  I plan to check out what I can bend into shape from my jewellery wire and then pound it flat for a heddle hook.  I found a DMC needle threading device that came in handy when none of my hand-friendly hooks would fit the holes of the Schacht 12-dpi rigid heddle.  www.dmc.com/mjRS/1/image/USA/Accessories/Pic/Needle_Trrader.copy.jpg

r1mein54 (not verified)

I too made a hook. I used a piece of metal reinforcing strap used in wood framing of houses. I cut a short angled slot at one end with a hacksaw and deburred it with a folded piece of emery paper and a small file. I took some kitchen drawer liner (perforated foamy type) and wrapped then taped over that to made a soft handle. I turned out the perfect width for the #12 reed.

apk5 (not verified)

I used to have a normal wee reed hook but now I have a different method of reed-sleying I need a longer hook, so I make mine out of fencing wire. Works fine with a 12 dent reed. If i had to do anything finer I guess I'd have to do something similar to this.

* edit * I've just remembered that the weave tech at college makes reed hooks out of broken wire heddles. Just snip off the eyelet and curver back the wire with a pair of pliers and the guide circle bit acts as a handle

rigidheddlewea… (not verified)

I wonder if sheets cut from an aluminum can would work too?

claudia (not verified)

Hi Laura,

I am a Mac user and haveWindows Media player on my computer and it wouldn't play.  Any ideas? 

Claudia

crosstownshuttler (not verified)

 Hi Laura and Claudia,

Laura, thank you for your video. I warp B2F but not quite like that. I think your way will save me some time.

Claudia, I'm a Mac user and I played the video using Quick Time if that helps you any.

Carie

Caroline (not verified)

hi Kay, that looks pretty good to me and would go nicely on my polished floorboards, if you don't want to give it houseroom, hehe! Its difficult to get any idea of scale from the photo, but if you were using cloth strips it would be a bit like weaving with ribbon wouldn't it? And I wouldn't trust that to stay put unless very firmly beaten down or stitched into place.

Have you thought about using a bicycle wheel as a frame? It means you are limited in size, but one of these any bigger would be heavy and unwieldy. Imagine trying to wash it! Also, using rug warp instead of fabric so that it looks less like a quilting piece? Just suggestions; I have never made one of these, just admired them from afar!