woven2000 (not verified)

I'm Clare and have a 30" 24-shaft Technical Dobby with two sectional beams.  I have used both back beams for Summer & Winter with a fine tabby, which worked quite well.  My first AVL was a 40" 16-shaft, and I found that I never used the whole 40", hence my choice for 30" when I got the Technical Dobby.  Of course, now I'm thinking of doing a few rugs and throws, so I'll be piecing things and doing doubleweave.  That's okay.

I haven't tried treadling the threading - is there a particular method for doing that on an AVL?  I don't have the autoadvance, so taking the front beam off is no big deal.  I've found that owning an AVL means having tools, so I have a couple of wrenches right at hand.

I haven't been weaving for quite a while - I took a detour through bobbin lace, jewelrymaking, knitting and spinning, and am now back to weaving.  I was amazed at how long it took me to put the warp on - I must be really out of practice!  I'm using a Warping Wheel without a crossmaker (I'm quite comfortable without it), and would be grateful for hits and tips from more experienced warpers.

Weeweaver (not verified)

Hi Folks,

I am Mary and I have a 1983 60" 12s 14t full frame Modular loom. It has lots of goodies like a plain and a 2" sectional beam, tension box and track and mounting system, auto-advance, cloth storage, double box flyshuttle, raddle, and I don't remember what all else. I bought it from someone who had it stored for many years after they got it from the original owner, who evidently wove a lot on it. I put it together and wove a couple of things on it, then moved to my guy's house. Now it's patiently sitting in the cellar waiting for me to finish sorting through all the "stuff" from my apartment and getting rid of most of it so I have room to put the loom together again. I can't wait to weave again and make beautiful cloth and lots of lint under the loom, lol.

crosstownshuttler (not verified)

Hi Mary & Evelyn,

Here is a site I found starting from somewhere here on Weavolution (I don't remember where). It has an explanation and photos of a fly shuttle mechanism modified with a spring. I hope this helps.

Carie

Evelyn (not verified)

Thanks Carie - I did find that link also.  I was loath to cut the fly shuttle cords so I inserted the springs by hooking one end onto the join and looping the cord then taping it.  I think my springs are a little small, but the arrangement is working.  Here is a link to the photos on my blog.

 

 

Bruce McLaughlin (not verified)

Here's how you do it.  After you have your threading in switch to "tie up" as opposed to "liftplan" mode.  Delete the treadling and put a straight draw in the tie up.  Now, Tromp as Writ your threading into the treadling and "save as".  Everytime you push the right treadle down--only one shaft will lift (the right one).  Thread it and move on to the next.  This method is especially good for complex threadings.

eweniquelyewe (not verified)

Hi, I'm a new AVL 40H V-Series owner as of the end of October 2011. Mid-January finally got it up and running after a few issues resolved by AVL and am now loving it. Learning the software as I go - on my 3rd warp now. Yesterday put on my first warp using the Warping Wheel - think I'll like it as long as I always remember to put the raddle top on before moving it to the front of the wheel....only made that mistake once, hopefully not again. Hoping to post some pictures soon, have been very lax with updating Weavolution, run out of hours in my days.... Cindie 

travelingweaver (not verified)

Hi My name is Virginia and I'm expecting my AVL any day now.  It will be a 40" 24 shaft compudobby.  With as many of the extras as I thought I could use and really understand.  It will probably take us a while to put it together and longer before I get my first warp put on it.  But I'm really excited. virginia

TinaHilton (not verified)

Wow!  I haven't had many problems, and what I did have were quickly fixed.  Have you checked out any local weaving guilds?  Complex Weavers is a great resource.  Many of those members have AVL looms.  And there's a Yahoo group called WeaveTech that's more active than this.  It's not just for AVL owners or Complex Weavers members, but for anyone who is at the intermediate and advanced levels.  And of course post your questions here and in the general Weaving forum on Weavolution.

Bonnie Inouye (not verified)

Which models of AVL looms do you have? You should have the manual that came with the loom. AVL does not do a great job on these, but it definitely helped me to assemble my looms. If you followed their instructions and tightened all the nuts and bolts, these looms should be quite solid. They were built for production weaving, except for the workshop dobby looms which are lighter and less sturdy. The only time I have seen a spring come off an AVL was on an early-model 16-shaft workshop dobby loom.

Of course the American garment industry uses cloth produced by big mills, not handweavers.

I wonder what kind of 16-shaft loom you consider to be normal? One with 18 treadles? Then you would need to change the tie-up whenever you wanted a different look. A computer-assisted loom is much faster and easier. And the AVL cloth storage system is a big help with production weaving.

Bonnie, weaving on AVL looms since 1987

Bonnie Inouye (not verified)

The cloth storage beam at the back of my AVL looms (all 3 of them, made in 1987, 1988, and 1994) is held in place with a cotter pin on one end. I had to replace this piece on one of my looms and was able to buy an appropriate size at the local Home Depot. That beam has never fallen off. There should be a description for installing and using the cloth storage system in the AVL manual.

Mechanical dobby looms (bars and pegs) were invented for production weaving. It is a good system. I used it for some years before I could buy a computer-assist box (compu-dobby). Often I just peg the tie-up or a variation of the tie-up and weave nice, long sequences by pulling the cord to change the direction of the loop of bars.

Where are your looms? Have you woven with 16 shafts before?

Bonnie