kathkol (not verified)

OK . . . That didn't work!

I will post the explanation and the photos on my project page.  If you need larger photos, send me a message with you email address and I will send them that way.

Claudia, if there is a way to attach the photos to this forum comment, please walk me through it.   

claudia (not verified)

Hi,

If you got to the "Help" section there is a topic titled "Upload pictures" or just click on this link http://www.weavolution.com/node/1328 and it walks you through the process.  I opened a window in my browser with the Help section and then I opened another window with this page up and I tested it out.  Here is my test picture.

Yikes!  It worked : )

Claudia

Caroline (not verified)

How did you manage to drill through the connectors and the pipe without it shattering? There is a definite art to it - one I haven't perfected, as yet.

conib (not verified)

I've purchased drill bits that drill wonderfully through plastic (including acrylic!) at a west coast chain called "Tap Plastics".  I believe they're on the web, too.

I have to admit, though, that I used a hand drill ("egg beater"-type) to do the acrylic (i.e. slow and easy), but I do use a drill press to drill sheets of high-impact polystyrene for my enameling samples.

These special-for-plastic drill bits are somewhat more "pointy" than the ones used to drill wood or to drill metal.

And -- absolutely when you drill anything (plastic or metal or wood or whatever) you've got to clamp the piece down to a stationary backing board (plywood, say), and drill right through into the board.  This helps the piece not splinter on the drill's exit, and of course it won't spin on you while you're trying to drill.

And don't forget the safety goggles.

-- Constance

kathkol (not verified)

  Constance's answer is better than mine will be, Caroline.  A friend set up his drill press for me and I went at it.  I have no idea what kind of bit or anything else he had on it, but he is a very talented guy, so I am sure it was the best kind.  I did do it very slowly on his advise!

I went to him after a couple tries with my hand drill.  They didn't crack, I just couldn't get the holes straight enough to let the arms spin freely.

Caroline (not verified)

Thanks for the info. I used an electric drill and it was obviously too fast. Now to hunt up those special drill bits!

marywareodc (not verified)

That's very clever - another one for my to-do list!  Thanks for sharing it.

claudia (not verified)

Thank you for that excellent, detailed description of your design.  I am sure there will be many new skein winders out there very soon.  My local hardware store gets a kick out of me coming in to trick out my loom all the time.  They are going to love this one  : )

To post a picture with your reply, use the image icon on the top of the reply box on the far right.  When you put your cursor on it it says "image/edit image"  and you can follow the directions here in the help section:  http://www.weavolution.com/node/1328  That's the easiest way, it's also the way I learned.  When you get the box that says upload you have a choice of size of your picture, small or medium.  Give it a try next time, it's really easy.  I've become a picture junkie since I figured it out, I put pictures everywhere.  Did you see the home page?  I did that, I added the photo of the three of us.

Claudia, spreading pictures everywhere on Weavolution

weavingfairy (not verified)

They are just beautiful and I bet they smell wonderful!  Wish I had some lavender growing in my yard.   Will have to check with florists  In Grand Rapids and see if they have any  lavender for sale.  Thanks for showing us.

gloria

suzyhok (not verified)

Greetings!

What fun it is to have a place to gather with weavers across the world.  Thank you WEAVOLUTION!

My husband and I recently moved to Savannah, Georgia (Xmas 08) after retiring as a middle school art teacher.  I made the difficult decision to sell my looms (4 shaft Leclercs and 2 shaft Unions), equipment and yarns which I had accumulated over 30 plus years of weaving.  Fortunately, I found a great 8 shaft Mighty Wolf in Savannah that I've enjoyed exploring using some of the stash I couldn't part with before we moved.  It feels so good to be weaving again.  Before I had my new studio set up I enjoyed getting back into cardboard loom weaving (see our Weavolution group.)

A couple years ago I published a book called Woven: a Bauhaus Memoir.  It's a fictitious journal by my alter ego, Anna Werke, a student at the Bauhaus, an avant garde art institution which existed in Germany between WWI and WWII.  Anna's life is woven together from facts I learned about the Bauhaus, its teachers and directors (including Gropius, Kandinsky, Klee, Albers) and the weavers (including Anni Albers and Gunta Stolzl.)  The weavers, Bauhausmadchen,  were an important part of the school.  My book tries to make this important time in art history come alive.  You can learn more about it on my website www.suzanneworkhokanson.com.

This summer we are living on our Catalina 36 sailboat on Lake Champlain in upstate NY.  It's cooler than Savannah - and absolutely beautiful.  I have my cardboard looms ready to go!

I started a blog as part of my Ravelry profile and it includes my fiber work - http://suzyhok.blogspot.com

Looking forward to learning more about what others are doing.

Suzy