r1mein54 (not verified)

Hi, I am a northeast Florida native. I started last October by making a tabletop loom out of scrap boards, stiff wire for a reed and tied string heddles out of fishing line for 2 frames. I straddled the frames over an oversized dowel to alternate up/down. That loom got 4 modifications and improvements - made a total of 10 scarves for self and family members. Will try to post some photos later. Since my interest has been primarily with tartan patterns I went ahead and purchased a used 42inch Nilus 4S 6T jack loom. This was giving me better "feel" but I was still trying to use inexpensive RedHeart knitting yarn and using the 12 dpi even going to 6 epi was still not right as I had to keep more warp tension than I could make on the weft - so everything was unbalanced. So this past week, I was wanting to practice more 2/2 twill weaving and did not want to use the #12reed. I decided to make a reed out of some plastic coated wire shelving I had left. I cut it down to the factory space that was about 4.25 inches wide. I cut out *lots* of other shelf wires from the 6 inch spacing and tied them to the 4.25 inch wide panel. Next was to trim and even the edges with a sidegrinder. The equal spacing of the wires came to exactly 4 dpi. I loaded up the warp with 48 yarns and put 2 in each space. You can see this in Projects. I had been using homemade shuttle sticks and got my wife to Ebay me a regular shuttle and bobbins. I tried to double-pass two colors on weft with two sticks and quit. Back to the workshop and 2 hours later I come back with a double bobbin shuttle I made from 1.5 inch PVC pipe, trimmed down wood pieces and stiff piece of clothes line wire. I had also used up 4 old bed slats, some left over wood dowel, woodglue and some screws and made warping frame. I am trying to get to a point where I can find the right yarn to weave my ancestors Clan Johnston tartan for garments or sew a kilt from. Open to suggestions ,,,,and how to post photos here with these comment boxes.

ruthmacgregor (not verified)

Hi R1mein54!  It sounds like your workshop is a busy place, producing all those weaving tools!

To post a photo in a message, click on the button that looks like a picture of a tree (at the top of your message window, along with the other editing tools).  That will lead you through a series of little windows so you can browse your computer's hard disk and choose the image to upload.  It's maybe not the friendliest of processes, but it's not hard.

You can find a fuller explanation by clicking on the "Help" tab at the top of the screen.

I hope you do upload some pictures -- I'd love to see your double shuttle!

Ruth

r1mein54 (not verified)

Thanks Ruth, I have already contacted Admin about not being able to post photos in these comment boxes. I do NOT have a toolbar with any icons, much less a tree in these comment fields. I am only able to upload a photo in the "projects" section.

marlenedg (not verified)

Well I am starting the third rug on this warp and the tension is holding just great so I guess I can show pictures of my new tools/toys.

Here first is the thread rack that I did not make, I just reused.It holds 24 spools just fine and works well. It started life as a card rack but is now a great spool rack.

 

Next I built a tension box. The combs are from dollar tree but I have ordered and now have 10 dent metal combs from Leclare to go on here. I am just not sure how I am going to

attach them. as you can see I have fancy clamps from the wood shop and it filled the beam just fine.

Lastly here is the way I fill my bobbins. Not all sticks work, but with the tape this one does.

Marlene in Oregon.

 

 

rigidheddlewea… (not verified)

Oops, sorry for some reason my stuff got posted twice and there's no way, I could find, to delete my own post so I erased what was here.

lambspin (not verified)

Archie Brennan's plan for copper pipe looms. 

 They are inifinitely alterable (! is that a word?).  I use them for knotted pile.

 Sarah Swett has simple loom plans in her book Kids Weaving too. 

esmecat (not verified)

hi Lambspin!

thank you for posting these. i really appreciate advice and reviews of plans and patterns... and i do believe you get what you pay for, so i really encourage reviews of plans and books with plans that are for sale... but i had hoped to keep this topic thread for free plans for small looms so that people who can't afford an investment to start have somewhere to turn for ideas.

i'm hoping that as the group grows, we'll see topic threads started for all different types of looms and tools... both of those links would make great topic starters.

Caroline (not verified)

If you go to the bedouin weaving site at

www.beduinweaving.com/printarchive/index.htm

and scroll down the articles to a pdf file called "The Colourful Oasis" there are plans for a nice little frame loom, as well as instructions and patterns to weave on it. The whole site is interesting if you are into ethnic weaving.

And if you are into a DIY floor loom, Philippe Demoule has the plans for a lovely loom here:

www.cs.arizona.edu/patterns/weaving/webdocs/df1_loom.pdf

If you check the patents on the arizona site, there are some weird, wonderful and fantastic plans for looms of every shape and size, and the copy write has expired on them all - so go for it!! You can also download patterns and instruction books. Its a wonderful resource! All FREE!

conib (not verified)

hi esmecat ...

Click again on the Archie Brennan copper loom link that Sara (lambspin) posted, then scroll down the page and you'll find images that link to Archie's free loom plans in pdf format.

-- Constance