lkautio (not verified)

It's also possible to do plied fringe twisting on the loom between pairs of pieces.  It's been a while since I've done it, but basically you twist one side, which causes the next piece to have the opposite twist.  A dowel through the middle holds the twist.  The idea is something like sprang or leno. Slower to twist on the loom, but you get two for the price of one.  With wool you can wash (finish) the pieces, remove the dowel and be done.  With other fibers you need to knot or wrap the ends in the usual way after finishing.

Laurie

lkautio (not verified)

It's also possible to do plied fringe twisting on the loom between pairs of pieces.  It's been a while since I've done it, but basically you twist one side, which causes the next piece to have the opposite twist.  A dowel through the middle holds the twist.  The idea is something like sprang or leno. Slower to twist on the loom, but you get two for the price of one.  With wool you can wash (finish) the pieces, remove the dowel and be done.  With other fibers you need to knot or wrap the ends in the usual way after finishing.

Laurie

Ellen (not verified)

Perhaps you know, but you can buy a little fringe-twister, that should make the work faster. I have only seen them, never thought of buying one, though. You see, I rather enjoy making fringes, while I think about new ideas for my next projects :-)

Ellen (not verified)

Perhaps you know, but you can buy a little fringe-twister, that should make the work faster. I have only seen them, never thought of buying one, though. You see, I rather enjoy making fringes, while I think about new ideas for my next projects :-)

suzyhok (not verified)

 What a wonderful job you have done explaining twisted fringes.  I love doing them by hand and find them very soothing -- kind of like handspinning on a wheel.  BUT, I must admit I haven't had to do 20 shawls at a time -- that might be a different story!

I love your blog!  It is full of great tips and information.  I have a small suggestion:  Can you put a link back to your website on it?  Viewers may want to see it after reading your blog... and may want to click back and forth.

I'll be looking for your fringe-twisters...

Suzy

suzyhok (not verified)

 What a wonderful job you have done explaining twisted fringes.  I love doing them by hand and find them very soothing -- kind of like handspinning on a wheel.  BUT, I must admit I haven't had to do 20 shawls at a time -- that might be a different story!

I love your blog!  It is full of great tips and information.  I have a small suggestion:  Can you put a link back to your website on it?  Viewers may want to see it after reading your blog... and may want to click back and forth.

I'll be looking for your fringe-twisters...

Suzy

Little Meadows (not verified)

Just a note about saving warp length - it's my experience that if I tie my warp in 1/2-1" bundles with an overhand knot and then lace on those bundles with shoe strings I "waste" the least amount.  The other aspect I like about this method is that by having several sections laced on any adjustments are made to one or 2 smaller groups rather than the entire width.

Liese

Little Meadows (not verified)

Just a note about saving warp length - it's my experience that if I tie my warp in 1/2-1" bundles with an overhand knot and then lace on those bundles with shoe strings I "waste" the least amount.  The other aspect I like about this method is that by having several sections laced on any adjustments are made to one or 2 smaller groups rather than the entire width.

Liese

lkautio (not verified)

Kerstin, The person who taught us the on-the-loom method was doing production wool shawls, which seemed to turn out very nicely after wet-finishing. We also tried some samples of other fibers.  Good (vigorous) wet-finishing seemed to be the key. I didn't see any as obviously different as your examples, but can see how that look could happen. 

I don't do production so beyond having tried it on the loom, I stick to my little fringe twisters (one manual with sheep, the other the electric hair type).

Laurie

lkautio (not verified)

Kerstin, The person who taught us the on-the-loom method was doing production wool shawls, which seemed to turn out very nicely after wet-finishing. We also tried some samples of other fibers.  Good (vigorous) wet-finishing seemed to be the key. I didn't see any as obviously different as your examples, but can see how that look could happen. 

I don't do production so beyond having tried it on the loom, I stick to my little fringe twisters (one manual with sheep, the other the electric hair type).

Laurie