can you change warp threads, not all of them, mid-warp, between projects, like a floating selvedge?

Comments

Weavolutionary

You can add a floating selvedge if you need it while you are mid warp.  I usually do it the same way I would fix a broken warp thread.  I create a thread that matches the selvedge thread and make sure it is as long as the remaining warp or as the project you are using it for.   Then, use a pin to attach it to the side of the project and hang the thread off the back beam with a weight of some sort attached to it for tension.

Hope that helps,

Claudia

debmcclintock

Sure, you just need to have a method for suspending them back at the warp beam.  It could be a stick, a rod or if you don't have many you could suspend them individually with fishing weights.  Here's a link to Sandra Rude's web page and one of her solutions.  She is a great weaver and has some good common sense solutions and generously shares them on her blog via photos and words.  Don't let her huge loom put you off.  It is the same principle as yours...you just want to suspend the warp threads.  No one will know what type of loom and what mechanism you used once your cloth is off the loom (shhhhhhh)

Broderie (not verified)

Thanks!

I warped for 3 towels, & I'm wanting more pizzaz.

lkautio (not verified)

You can also cut the warp threads you are going to replace and weave them in as weft (so they make a 90 degree angle).  Then, just pin in the new warp thread and weight anywhere or time you want it.  With a string or other replacement heddle you can change the shaft it is on as well.

Laurie Autio

Broderie (not verified)

Thanks - great ideas!

Submitted by Anonymous (not verified) on