I'm cleaning up the parts and replacing a few on my old, new-to-me Varapapuu.   I'm keeping the string heddles for now.   Since I want to use this as a drawloom, I thought I'd wait for the class before purchasing texsolv heddles.  But, I do want to replace all of the tieup chords with texsolv.   Turns out I have enough heddle bars for 10 harnesses, and I'll make a few more treddles too.   But the question is, how much texsolv should I buy?   Several places sell spools of 54 or 55 yards.   Is that enough?

Thanks in advance,

 

Comments

Joanne Hall

There are kits as well.  They include all the cords cut to length and the pins. How much you need is determined by whether you need beam cords, as they take a lot of yards.  The 55yd spool is enough for beam cords and maybe 4 shafts, horizontal countermarch.  You would need another one for 10 shafts.  For four shafts you will need two bags of the pins.  For 10 shafts, a total of 7 bags.  The kits are actually less expensive.

Write to me at [email protected]

Joanne

Dawn McCarthy

I always buy the 55 yard spool and hopefully the Varpa still has aprons!  Should just be enough (although texsolv is like duct tape) you can use it for so many things and can never have enough!

Dawn

SallyE (not verified)

The kits sound good - but if the chords are cut to length, how do they know what length to cut them?   Don't different kinds of looms need different lengths for some of the chords?  I would think that a Cranbrook and my loom would need different length chords, for example.

Are the chords labeled so you can tell which ones go where?

There seem to be two types of those little pegs also, and the kits have some of each.

And finally, and I'm embarassed to ask this, but what is a beam chord? 

Yes, it has aprons, but we'll see what shape they are in after I wash them.   One has a big green paint stain on it.

 

 

Joanne Hall

Cloth aprons are on looms from Leclerc and on Finish looms.  Most other looms have cord instead of cloth aprons, so are called beam cords.  You can choose which you would like on most looms.  If you want to switch to beam cords, you might have to drill some holes in the beam.

Joanne

SallyE (not verified)

I have a loom with both chords and apron on the same beam!

 

Joanne Hall

There is little difference in the cord lengths needed for horizontal countermarch looms from different companies.  There is little difference in the heights of looms, which is what might require a different length of cord.  The kits are made in Sweden and the cords are long enough for the tallest Swedish looms.  The Finnish looms are a little shorter, so the cords would be long enough.  The cords are color coded for where they go.

For countermarch tie-ups, the anchor pins are used, since they are the ones used for putting the pins into the cord and then into a hole in the wooden loom parts.  Arrow pegs are used when a cord is attached to another cord, or when a simple stopper is needed.  However, they are too long to use in place of the anchor pins in most places.

Joanne

SallyE (not verified)

Thanks again for all your help!

 

kerstinfroberg

Joanne wrote:

"For countermarch tie-ups, the anchor pins are used, since they are the ones used for putting the pins into the cord and then into a hole in the wooden loom parts."

While this is true, it depends on the size of the holes. Many looms I have known have had the wrong size holes - if the hole is just a little too big the anchor pin can (will) fall out. I have stopped using anchor pins, as the arrow pins function well as a "stopper" in all places I have tried them. I've never found them "too long"?

Joanne Hall

Hi Kerstin,

Most of the Varpapuu looms here in the US came in the 80s and were made for using Texsolv cord.  So, usually the pins hold very well.  Even the old Toika and Glimakra looms that came in the 70s have holes which are the right size. 

I just got a call from a weaver who uses the arrow pegs for all the tie-up on her older Glimakra and in some places the pin is too long and she was having trouble with them, especially interfering with the movement of the lamms.  The arrow  pegs are longer than the thickness of the jacks and lamms.  I don't know if they will stay in place if positioned straight with the wood.

Joanne

ReedGuy

Works perfect here Joanne as I know you already use them. With the knowledge of using a 7/32" hole, as suggested by another forum member, I drilled them into the jacks, treadles and lamms. :)

We need a little picture anyway.

Andreweaver (not verified)

I have just upgraded my Glimakra from 4 to 10 shafts and they sent me a pack for the tie up nut only enough tie chord for a balanced weave so I need more chord. Who is the cheapest UK supplier? I need at least another 55 m length as may need to replace apron chords as well, certainly in the front.

Suggestions welcome.

Submitted by Anonymous (not verified) on