Hi Everybody;

The wife and me jumped into the deep end and purchased an older Ashford 4 shaft loom.   

We've attempted the first setup.. but have a concern regarding the size of reed? 

The thread (yarn) worsted weight.. seems to stick in the dent... this when doing a straight weave 

should we select a larger reed? or a different pattern?  

We're on a kinda steep learning curve... ;)

Thanks

 

Comments

Vicki Allen (not verified)

Good morning, Duffster,

How many dents (spaces) per inch is the reed you are using?

To determine if this is the correct reed for your yarn, you must determine how many ends per inch you need to weave, i.e. the sett.

Take a ruler, wind the yarn firmly but not tightly, around the ruler. Count the number of wraps in an inch. If your are weaving plain weave, divide the number of wraps in an inch by 2. This will be the sett.

If you have a sett of 10 epi (ends per inch) and a reed that is 10 dents per inch, you are in business.

Since you say the yarn is sticking, I'd guess you have a reed with more dents per inch than your sett calls for. Thus the yarn does not have enough room to pass easily through the dents.

I hope this helps.

Vicki Allen

kbird (not verified)

Vicki -

That is a terrific explanation that you wrote... I hope Duffster is able to make use of it.  If not, I'll bet it will be of help to someone...

Kay

Vicki Allen (not verified)

Thank you, kbird.

Duffster, please let us know what progress you are making. Weaving is so much fun, that we don't want anyone to be discouraged.

Vicki Allen

 

Michael White

Hi, Vick is right you need to check the size of your reed. Using a sticky yarn to learn is not a good idea. What type of yarn are you using? A nice smooth cotton would work better.

Michael

Submitted by Duffster on