I have a Rasmussen 4-harness table loom with a treadle set-up. It came with 75 flat steel heddles on each shaft (total 300). I am preparing a warp to weave a project with 430 ends. I purchased 200 of the inserted eye heddles because the flat ones no longer seem to be available. Has anyone out there mixed them together on the same shaft? The eyes look to be more or less at the same level, although I guess I won't know for sure until I put the heddles in. I am a real newbie. This is just my second project. Any advice would be greatly appreciated! 

Comments

SallyE (not verified)

Why do you want to mix them on the same shaft?   They are pretty easy to move from shaft to shaft.  

BTW, the inserted eye heddles are much nicer, IMO.

But to answer, if the threads are at the same level, I don't see why it wouldn't work.

 

sally orgren

As long as your sett isn't too densely packed, you can get away with it. 30 epi was my most recent project on a table loom with mixed heddles.

Ann A

I think given the math, I will need to mix them at least on one shaft. It's nice to know that the inserted eye heddles are good to work with. My project is 24 epi so I guess I should be okay.

sally orgren

And flat steel heddles flick pretty well across the heddle bar when threading. Have fun!

HCC

I was so thankful to find this post and comments, because I am in exactly the same position with my 4-shaft floor loom with its 450+ flat steel heddles. Those work just fine, but I need about 100 more heddles for my next project. I'd love to go to the inserted eye type, but have been fashing about mixing the two types. THAT confusion solved!

MY eyes aren't what they used to be, and the standard inserted eye opening looks smaller than the ones on my steel heddles. Has anyone had experiece with the wire heddles with the large inserted eyes vs: the standard eye versions?

SallyE (not verified)

I find the inserted eye heddles easier to see than the wire heddles, because of the solder.   That extra bit of solder around the eye seems to also be easier on the warp.   They are a bit more expensive, but you only buy them once.

Ann A

Having a threading hook might help if you have trouble seeing. 

HCC

Thanks! I do use a nice shiny hook to thread the heddles. I know some people can do it without a hook; they must have outstanding depth perception and coordination.

 

Sorry I didn't ask clearly! I am sold on the wire heddles with the soldered inserted eye. But there are two inserted eye sizes. The most common size I've seen features a 1/4" X 1/8" eye. That's smaller than the opening on my steel heddles. The larger inserted eye heddles are more expensive than the standard, but that eye is really large: 3/8" X 1/4". It looks as if it would ease the rub on thicker fibers, besides being a bigger target for threading! But are there disadvantages with that larger inserted eye heddle, or advantages to the smaller inserted eye version?

Queezle

I have finally gotten my other loom accessible and realized that it has steel heddles, not inserted eye.  Probably there are not enough, and I'm wondering - as I add more heddles (inserted eye), would it make sense to restrict the new type to one shaft?  I sort of like the idea that it also might make it easier to not make threading errors. 

pammersw

It seems to me like they might nest together better that way, Queezle.

Submitted by Ann A on