Does anyone know how to use steel leno heddles? We have a large number of the things go and I have a student wanting to use them for edge binding.  I can find a tutorial on weavezine about using doup strings for leno,  but nothing about using steel leno heddles. 

 

I found the abstract for a pamphlet called "fundamentals of leno weaving"  but I can't find it available for sale anyway.  I'll ask the heddle manufacturers for information but thought it was worth a try asking here first. 

 

Cheers 

Comments

kerstinfroberg

Maybe in Watson? - I vaguely remember reading about them, doesn't he have two books? Elementary design + something more?

weaver-dyer (not verified)

Did you try searching for the pamphlet or other leno information on handweaving.net?

If you can't find the pamphlet for sale or online, perhaps it is available as an interlibrary loan.

Janet

Andrew Kieran (not verified)

Good idea Janet.  I'll look into that when I get home.  Kerstin I have that book,  in a box somewhere.  Moving just now. 

 

I found a pdf online from  a different publication which makes things much clearer. When I'm done figuring this out I'm going to do a write up because it'd be helpful for the students 

Andrew Kieran (not verified)

Thanks Michael 

 

I hadn't considered US Amazon.  I'll get that on payday :-) 

Andrew Kieran (not verified)

I have found a series of articles, entitled "Leno Weaving and Design" by W.E. Shinn and A.E. McKenna of Clemson College S.C (South Carolina?) which I believe will be most helpful.

 

Also, I found Leno Weaving in Watson, and also Nisbet, but only for string doup, though I suspect the principle of operation is identical

Andrew Kieran (not verified)

I have found a wide variety of articles both scholarly, industrial, historic, modern, crafty, what have you on using string doups to do Leno of many varieties.

 

Sadly, I have only found the one text which describes the use of steel doup heddles for the creating of Leno, and despite following it's examples I am unable to gain a reliable shed in either open or crossed positions. I suspect there is some little thing that I am not getting quite right which still eludes me.

 

One thing that I am suspecting is that the raising heddles for the doup may need to be perfectly aligned in relation to each other to allow for ease of movement of the doup. As we use a jack dobby mechanism with the shafts simply hanging from their selectors to form the lower shed (a George Wood Dobby, in case you're interested) the shafts are moving about causing the doup heddle to get tangled and twisted and at least to not lift properly.

I also think there is maybe something I am not doing _quite_ right which an experienced person would spot with the most cursory inspection. Sadly, I do not currently have the time to experiment with all the fine adjustments I can make to the height of the easing bar and so on and so forth so I shall leave it for now.

Instead I shall make some doup strings out of silk and try making the Leno cross the old-fashioned way instead.

Will let you all know how I get on later in the week

Andrew

Andrew Kieran (not verified)

Hi All

 

We found out what we were doing wrong. So in the steel leno heddle, there are 3 parts.

There are the two slider-heddles (that's what I'm calling them) which are each made of two flat pieces of steel joined together in the middle, just before a slight s-curve. These face each other on seperate shafts.

Then there is the doup heddle, which consists of a long upside down U like shape of flat steel with an eye at the top and two open rectangles at either end.

The doup heddle slides in the slider heddles. It is raised up in one and then the other by being lifted by the join in the slider. The problem we had was that the doups were failing to fall back down and were getting tangled and twisted. This is because we were copying the set up of the fringe twisters on the jacquard, which uses magnetic strips in the sliders to hold the doup heddle in place on the downstroke.

What we found when searching in the store room was a pair of shafts with leno heddles mounted on them. On these shafts, we could see that on the outsides of the steel sliders the feet of the doup heddles protruded at the bottom, and through the rectangular holes in these feet there was threaded a steel bar. One on each side, and joined at the ends.

It is these two bars, which are joined together and prevent the doups from rising out of the sliders, which also cause the doups to fall back down on the closing shed and prevent them from getting twisted due to not falling correctly.

The annoying thing is, that although the literature available (watson, nisbet, some various monographs online) indicated different ways of threading up this kind of heddles, none of them indicated the exact way to mount these heddles on the loom. I often feel when reading these old books that a certain division of labour and level of industrial education is assumed on the part of the reader. I get the impression that i am assumed to be a designer or production manager in a large mill in an industrial weaving district of northern britain during the late stages of the industrial revolution and that, of course, should I not know the exact operation of these devices, then I can quite simply confer with the head loom tuner, or if that fails, travel to the next town over where of course, they have been weaving leno for years now and I can ask their man.

This attitude is evident on the plate on the inside cover of a yarn twisting machine we have, which, before giving the mathematical formula by which you choose the correct gears to use to get the desired twist, explains that in order to find out how to use this machine, one should consult the plant's head mechanic, as he will have received training from the company salesman upon delivery and installation of the equipment.

 

ANYHOW, the student who's weaving this is going to see how she gets on, but I'm fairly confident she'll have success, we've woven a small sample with one heddle and she now needs to set the loom up with 14 more I think.

 

She's using them to create bounded edges so she can weave multiple narrow bands at once in the same width. It's the same way they bind the edges of scarves when weaving multiple scarves on a width at one of the local factories. They then finish it with the leno binders in, then remove the binders and hem stitch the edges of the scarves.

kerstinfroberg

... and now it is *you* who are the head loom tuner?!?

I have often wondered if there is another set of books out there, like "the loom mechanics companion" or somesuch - in fact, I found some articles of that ilk in Posselt's textile journal (I think it was called - also on handweaving.net), only I could not find a table of contents... (and nothing on your heddles, that I recall)

Well: congratulations, and good luck for the 14 more!

Andrew Kieran (not verified)

The first image shows the manner whereby the entire assembly is put together. You will see each slider facing each other on individual shafts.

To clarify, there are two shafts for each leno shedder. Each leno shedder consists of three parts. Two sliders, and one doup heddle. The sliders face each other, with the joined part (that join the two pieces of the individual slider together) on the bottom of the curved area. The sliders then have the doup heddle mounted on them, with it's "legs" sliding up and down in the gaps in the sliders, and the joins in the sliders are what lifts the doup up, first on one side, then the other.

The twisting motion is caused by the yarns, one of which is passed through the eye of the doup, the other which is passed through the gap between the sliders above. The doup is lifted first to one side of the free yarn, and the the other, causing the yarns to twist and create a leno structure.

 

In addition, the leno ends must be held back and down from the rest of the warp by a metal bar positioned behind the shafts and below the warp line a certain distance. The reason for this I am not sure, but there obviously is a good reason or people wouldn't bother doing it.

 

Like I say, I'll do a full write up on this matter in time, right now though I haven't figured out a good way to create diagrams that explain this kind of thing. Photos are not sufficient I feel and my graphics skills are currently insufficient to the task of making the kind of helpful and clear diagrams one finds in a Collingwood book, for instance.

Andrew Kieran (not verified)

kirsten, I've found a number of such books, but they're more along the line of supplementary textbooks, meant to be used in combination with an apprenticeship or other form of industrial education, rather than an education in themselves.

Sadly the local industry is either incapable or unwilling to support an education program for industrial weavers so these skills are extremely hard to come by without working your way up through a mill over the course of decades. It's a general problem in this country. In fact, it's being addressed in the Isle of Lewis now where they weave Harris Tweed, due to the problem of all the weavers being very old men, they became concerned that the industry would be literally dead in 20 years, so they initiated a long term program to train young men and women of the island in the art of producing and selling tweed. So I expect things to change, and the islanders may just lead the way to a new renaissance in cloth manufacture in this country. The coming decades will tell, but the signs are good, business is picking up and good things are happening.

debmcclintock

Thank you so much for taking time to note your journey. It is fascinating and I agree with Kirsten, you are now the head Leno tweaker. If you have a chance to capture the heddles in action on with a short movie I'm sure one of us can post the Leno heddles in action on a blog or on YouTube for general viewing if your institute would allow. A short 30 second moving showing the relationship between all the pieces you describe so eloquently. Great detective work and please show us your student/intern's cloth once they work the warp. Regards Deb Mc
Submitted by Anonymous (not verified) on