Hi! I just had to share this with you. Other than my little potholder loom, I just received my very first loom! Work area is 10 inches wide and about two yards (2) long. Overall size is 21 inches long, 14 inches wide 9 inches tall. I bought it on Ebay and it happens to be made by another Texas resident. :) I can't wait to get started!

 

Cindy Jo

Comments

Caroline (not verified)

That looks very interesting! How does it warp up? Its got a nice length for the tension device - that sort is supposed to be much better and stronger than the paddle type I have on mine. I found I ran out of room to move the warp around before I was half way around, so had to find a work around.

You will be able to make quite wide pieces on that loom. You will have fun!

Caroline

Cindy Jo (not verified)

I'll have to answer your question about how it warps up later on. I'm just beginning so this is a huge learning experience. One that I will stick with because I want so badly to learn. I think the hardest part for me is going to be learning the terms so when I say something, I say it right.

Cindy Jo

Aunt Janet (not verified)

I hve two looms very similar to your new loom sitting on a shelf.  They don't have the tensioning device that yours does, so they were destined to go to the bonfire.  They sit there waiting for me to put a tensioner on them.  Unless the sides come off your loom, you will have to warp by running the yarn around the loom in a continuous warp.  I believe it is inkle in nature, so you will need to make heddles, as you would for an inkle.  If that loom has a removable side, the warping might go easier.  One problem I see with that, is that the pegs are so long that they are likely to bend with a wide warp, which would not make a good warp.  I bet you have to warp with both sides on.

Good luck with your loom.

Aunt Janet

Cindy Jo (not verified)

Thanks for the comment Janet. I am itching to begin with this. One very nice thing is that the person who made my loom also made the heddles for me so it's just a matter of learning the warping before I can get started. I've been looking at regular inkle loom directions, but I get thrown by the fact that they have more pegs than mine does.

Cindy Jo

Caroline (not verified)

Cindy, I'm taking a guess here, but I think the warp goes from the front diagonally to the back upper peg alternating over and under the front upper peg - this helps create the sheds. It goes down the back to the next peg, then loops back to go over the tension bar, goes to the last back peg then around to the front. The empty peg is for the heddles.

Does this make sense?

I'm still on my first morning coffee so things are a bit slow here, hehe!

Cindy Jo (not verified)

You were right, Caroline! I just got my warping diagram. Now I have to find a simple band to try because I sure as heck don't know a thing about how to do say a two color band. I'm taking baby steps, that's for certain. LOL

I would love to find a two-color celtic knot pattern with directions as to how you warp the threads, as in, what color goes where.

Cindy Jo

Cindy Jo (not verified)

Thank you so much, Caroline! I am a member of the backstrap group and want to try some of the tutorials on my inkle loom.

Thank you again. Any and all help is very much appreciated by this novice weaver. :)

Cindy Jo

Cindy Jo (not verified)

OK. Got it warped. I was so excited about that, I had to take it and show it to my son. There are a couple more photos in my projects.

Cindy Jo

Cindy Jo (not verified)

Well, if nothing else, I've learned I don't like using worsted weight yarn. This one may go to the scrap pile and then I'll get out my crochet cotton.

Cindy Jo

Caroline (not verified)

Hey! That looks good! don't worry about the heavier yarn. Its a good idea to start heavier and then work your way to the finer yarns as you get more skilled. Once you use finer yarns, and Perle and Aunt Lydias crochet cotton seem to be the go, you start doing the really intricate patterns that look so wonderful because they are very detailed. But thicker yarns like worsted, with stripes and simple patterns, make great purses or little amulet bags, where durability under stress might be an issue. The finer yarns may not always wear so well if they are abused by kids etc.

I'm using a perle yarn for the exercises in Laverne's monograph on Andean Pebble Weave, and the band is sooooooooo tiny, its almost a shoe lace, and i'm cross-eyed trying to spot any errors. If it wasn't for the border you would have no idea what it was at all. I should have gone worsted for that, lol!

By the way, I love those bright colours! You can use fantastic colour combinations in band weaving and they all seem to look great together. And you can mix textures and different types of yarns as well, so there is generally no such thing as a "plain" band.

Cindy Jo (not verified)

I was too hasty in my conclusion about not liking worsted weight. What I actually didn't like, and found out after a bit was that there is a learning curve on selvages.

I did cut that one off and I'll post a photo of my ever narrowing selvages. I'm going to start another tomorrow. It's 4:00AM here and I need to try to get to sleep earlier than 6am for a change.

Talk to you later/

Cindy Jo

Aunt Janet (not verified)

Good going, Cindy!  You will be wanting to put a new warp on and start planning your next umpteen projects.  I am always thinking about the next in line.  It gets me in trouble, adding WIPs and UFOs to my to-do list.

Happy weaving.

 

Cindy Jo (not verified)

I do have a question for y'all. The very first rows that I weave are wider than the rest for about an inch into the weaving. How do I correct this?

Cindy Jo

CraftinSusan

I recently bought a new Inkle loom off Ebay.  Here is my first band on it.   I used Crochet Cotton #10.

Cindy Jo (not verified)

Wow! That looks great!

Cindy Jo

CraftinSusan

Thanks!  I finished my second band on the same loom using some simple pick up patterns from the Bress book.  I had photographed the band when it was one the loom but for some reason those pictures weren't in my digital camera.  I had quite a few photos on the SD card and maybe it was full.  I will have to pull the band out.

Caroline (not verified)

Cindy, it takes a few rows to get the tension right. As you get more experienced it becomes quicker, but there is nothing to worry about, you will learn just how tight you need to pull the weft as it does vary according to yarn used.

Caroline

Cindy Jo (not verified)

Thanks Caroline!

Cindy Jo

Sweet Annie (not verified)

Which loom did you purchase? Was it one up for auction or one that is listed 'all the time'?

Did you see The Loom Merchant www.the-loom-merchant.com is offering - starting July 4 - a free online inkle weaving course? 

 

CraftinSusan

The Inkle loom i purchased was a new one and there seems to be at least one on ebay all the time.  I didn't care for the shuttle though.  I prefer shuttles with a sharper edge than what it usually sent with an Inkle or Band loom.  The loom is well made and is nice and sturdy.  It is not as long as some so the weaving 'sweet spot' is a shorter than, say, the Schacht Inkle loom but, on the other hand, my Inkle loom was a lot cheaper and I do prefer the shorter loom length.  The maximum band length and width seems to be about the same as the other regular Inkles on the market.

I did see the information about The Loom Merchant's free class.  I will be going to Convergence in July and am signed up for Darryl Lancaster's Inkle Weaving class.  I have a small Inkle loom by Tornadowood that I will be taking to Convergence but I can always use the larger Inkle loom for the Loom Merchant's free class.  I just haven't decided if I have enough time for that internet class.  I have a lot going on this month that may spill into July.

Cindy Jo (not verified)

I think I'm going to buy a regular inkle loom. I really don't care for the one I did buy. It will have to wait until the end of the month though. You know how those fixed incomes go. :) I did sign up for the free online course and am looking forward to it. I'll continue to play with what I have for now.

Cindy Jo

Evelyn (not verified)

Just finished my first band.  I borrowed what looks to be a home made loom from my guild.  The loom is a little light and and pegs bend too much, but it worked well enough.  It does have a tension peg, but it also isn't really strong enough.  I am looking for something stronger and am thinking of a Schact - they seem to be very popular.

The bag itself is a damask sample piece I wove years ago - it was just wating for a band and I will finish with a button and loop closure.

More photos at my blog

http://evelynoldroyd.wordpress.com/2010/06/26/inkle-band-finished/

Cindy Jo (not verified)

How beautiful!

Cindy Jo

Aunt Janet (not verified)

WOW!  That is beautiful! 

My favorite band loom is the Glimakra counterbalance.  It will weave up to 5" wide, has beams to wrap a nice long band.  All the bugs have been worked out of this loom, and it works great.  It is a bit pricey, but well worth it.  You can weave very fast when you get used to this loom.

Janet

 

 

Evelyn (not verified)

Thank you!  and thanks for the info about the Glimakra band loom.  It  is interesting, but as you say pricey!   I had a look at the youtube video - wow do they work fast!  

I am going to have to look for a used loom and have seen the Glimakra listed here.  I did have a cendrel which I sold last year!  Oh well - something will come along. 

 

 

Evelyn (not verified)

2nd band is done in  a pick up technique.  Heavy yarn but I like the effect. 

Karren K. Brito

Hey that is the same pattern I used on the green bookmarks. I saw it on some woven piece and drew it out myself, what a suprise to see it here.  It is a small world.  Anyhow, I like your design.

Evelyn (not verified)

The bookmarks are lovely with the little bit of red and yellow on the borders. 

Thanks, but not my pattern - it is on page 34 of Byways in Handweaving, Atwater.  I miss counted and put on too few pattern warps so adjusted the pattern by eliminating the little wings in the centre of the long angle. 

Submitted by Anonymous (not verified) on