I am about to embark on something new with the next scarf, and have some questions.

I am using a 4 shaft/6 treadle baby wolf. The design my boyfriend picked is "Fancy Herringbone" threading no. 21, treadling pattern I, page 53 of the 1963 sixth printing (revised) "A Handweaver's Pattern Book" by Marguerite P. Davison. It is sort of an offset herringbone, like how ski tracks look when you climb a hill. This twill has lots of places where two or even three threads in a row are on the surface without being crossed. 

As it is meant to be a scarf, I think it would be more durable with a floating selvage.  I've not done one before, though. Any advice/links to directions/youtube videos?  

Davison either doesn't say very much about floating selvages, or doesn't mention them at all. I also 

h

ave Deborah Chandler's "Learning to Weave" (1995 version, if there is more than one) and she only briefly touches on the floating selvage on pages 133-134.

Also, any other advice about this draft? I think it will draw in more than the plain weaves I've been doing - any guesses how much?

 

Thanks!

 

Comments

sandra.eberhar…

Twill is a denser fabric than plain weave and needs a closer sett.  To figure ends/inch from wraps/inch for plain weave, sett is 1/2 wpi; for twill it's 2/3 wpi.  The floats on your scarff shouldn't be long enough to snag easily.  A floating selvedge may not make the scarf more durable, but will make it easier to weave.  You don't have to worry about the weft not catching the edge warp.  I generally double my FS and warp them with the rest of the warp.  I weight them with s-hooks and water bottles behind the warp beam.  Some people screw bottles or cannisters on FS, but you have to move those as you advance the warp.

sandra.eberhar…

Another reason I like FS is that you can put two or more shots in the same shed (you get a nicer selvedge that using thicket weft).

pammersw

Sorry for the weird formatting issues. I fix it, but it doesn't stay fixed.

ReedGuy

I think the formatting is effected when html tags get left behind when editing. Such as /br and /p.

Warping the FS along with the rest, just makes one less thing to think about once you begin weaving. :)

 

pammersw

I was taught to do a plain weave over toilet paper to even out the warp, then do two rows of plain weave to start (and end) a twill piece.  But the way this is threaded, 1-3, 2-4 does not give an even plain weave, xoxoxoxo.

The threading pattern is 233411322144 (left to right). The treadling is a standard 1-2, 2-3, 3-4, 4-1 twill pattern. So a 1-3, 2-4 treadling results in oxxoxxxooxoo in one row, and xooxoooxxoxx in the next.

Do I just hand-pick an xoxoxo pattern to start and end, or just go with the oddball way the 1-3, 2-4 weaves up?

Sara von Tresckow

So you lift shafts 1 and 2 together and follow with 3 and 4 together.

As long as they lift every other thread, you have plain weave.

pammersw

But with this threading, those shafts don't pick up every other thread. No combination of shafts does, as every shaft has a spot with two adjacent threads. Hence my question. :)

Sara von Tresckow

You really don't need to do the toilet paper and plain weave - after you've woven a while, you'll come to realize that the warp evens itself out when you cut the fabric down to finish it - also you do not need any other structure in the piece than what you've planned.

I usually use the first few rows to test the threading and catch any crossed threads. Inserting a piece of cardboard or warp stick to give you a straight edge to beat against (can easily be removed after you have woven a few inches) gives you a nice place to start your project. Within an inch any spaces due to tying on (use small bouts to minimize spreading in the first place) and you can just keep weaving.

pammersw

Would it look good and square? This us a gift, a scarf for my boyfriend,  so I want the ends to look good. 

ReedGuy

Use a cord, tied onto the ends of the rod and undualted through (over and under) the tied bouts. That evens out the warp before beginning. This is shown in 'Big Book of Weaving' and works very well. At the end of the scarf, just snip the warp in small sections to make a fringe from the ends and don't cut the ends all in one swoop. That way the last pick or two doesn't slip out. It's a scarf, so your probably making fringe anyway, so make it easy. :)

pammersw

I ended up combining everything and I like how it is going now. Photo below.


Submitted by pammersw on