I would like to make a trapeze for warping my loom.  I have two looms in the basement, half of which I call my "studio".  They sit side-by-side and there are open beams and insulation in the basement.  I could hang a bar from the beams on the ceiling but it would be difficult for me to do that.  I saw the "portable" one that Tien made but I'm not very handy.  I do have an excellent hardware store in town and they will help with almost anything I want to make.

So, are there plans around somewhere or how hard is this?

This blog post shows the way I do it now.  My tension is good but it's not great and I hear a trapeze is easier and gives you nearly perfect tension.

Claudia

Comments

Caroline (not verified)

Would it be possible to organise a couple of pulleys in the large overhead beams? With this you could have something you can raise and lower as you need it. To put the pulleys in you need a cordless drill attached to a man who has just enough skill to drill a couple of straight holes. A large hook in each hole cemented in with Liquid Nails (so that said man can swing on it for you to prove how strong it is) will hold the pulleys in place, and they in turn will hold the trapeze. Its the same set up used for blinds, and when you pull down on the pulley you can raise and lower whatever you have attached to it. Its not expensive.

The hardest part will be to find a man who doesn't laugh when you tell him what you want, and who is content to merely drill a couple of holes and not try to embellish/improve/sabotage your plans because he knows a better/more efficient/totally unsuitable way to do it.

If you can sketch out what you have in mind, the man at the hardware store will soon work out the bits and pieces you need. Good luck! ;-) !!

francorios (not verified)

Caroline wrote: "and not try to embellish/improve/sabotage your plans because he knows a better/more efficient/totally unsuitable way to do it."

You say that like it's a bad thing.

Have a good day!

tien (not verified)

Plans can be found in Kati Reeder Meek's book, How to Warp with a Trapeze and Dance With Your Loom.  That's where I got the plans for mine (which can be made in under an hour with a circular saw and drill).  Getting your hands on a copy may be the difficult part - I believe it's currently out of print.  Well worth the trouble of finding, however - she also goes into live weight tension and quite a few other really handy tips.

Caroline (not verified)

Franco, it was a bad thing. Thats why I am now a DIY-er - I learn from my mistakes.

claudia (not verified)

It sounds like the answers all lie in Kati's book.  Now the search begins.  Or, I can just add it to my Holiday gift list and let someone else do the searching  <g>

If you see one for sale online, please let me know.  No handy males with portable drill.  One handy, unwilling to try new projects male with old fashioned type drill.

Claudia

Submitted by Anonymous (not verified) on