Hi weavolution friends, You all are amazing - there is so much information and so much I have to learn! As I've written before, my loom is countermarch loom is quite old and the Gowdy reeds that came with it, a 6 dent and a 15 dent, are sturdy, but considerably rusty. I am attempting to fix them, but will likely need new reeds. Based on your experience (I am a total novice), can anyone suggest which one or two reeds a beginner should invest in (how many dents)? Thanks a bunch!
I have found that the two that I use most are 10 and 12, but 8 is nice is you want to make rugs. It depends on what you think you might want to weave.
If you're going to get two, I would get a ten and either an eight or a twelve. With those two, you can easily get many possible combinations. Personally, I would go for the eight since it's what I use for chenille scarves and rag rugs, but if you tend to like finer threads and be a towel person, you might be better off with the twelve.
I have been weaving for about
I have been weaving for about a year now and have only used a 12 dent reed. However, there are times I wish that I had that 10 dent reed. My loom came with an 8 dent and a 12 dent reed. Someday, I will get that 10 dent reed. Its hard to decide and i wish you the best of luck in your decision.
And I have 8,10 and 16, never
And I have 8,10 and 16, never needed anything else. Whatever you choose, you'll make it work. :)
Reeds I Use Most
I use the 8, 10 and 12 dent reeds the most.
Do you have a favorite reed maker to recommend?
I've got a few hand-me-down reeds that came with my looms, so I've never actually bought a reed. Now I want to expand my collection, but am not sure which kind to buy. I would rather spend $50 for a good reed that will outlive me than $30 for a reed that won't.
NOTE: these are for my 15" table loom, which is why the prices above are lower than they would be for a meter wide floor loom.
<p>Buy Stainless Steel</p>
Buy Stainless Steel
<p>Can anyone comment on reed
Can anyone comment on reed HEIGHT? What determines whether a 4-inch or a 5-inch high reed should be used?