I am looking for words of wisdom.  I have a 39" warp, with 41 1/2" heddle bars.  What is a good way to keep heddles from coming off the ends of the heddle bars?  Any words of advice for dealing with this wide warp will be greatly appreciated.  I know I could take off threads from both ends, but I really like the pattern repeats as I have them now.

Thanks,

Karen B

Comments

Joanne Hall

Hi Karen,

Tie a string into the hole in the end of the shaft bar and then to the other end.  That is one of the reasons there are holes in the ends of the heddle bars.  It is also helpful to keep the shaft pins in those holes until you have the loom completely tied up.

Joanne

kerstinfroberg

All Scandinavian looms I have seen have this very handy feature: a hole through the heddle bar near the end.
The hole is used to tie a string from one end to the other to prevent heddles falling off. You use one string per heddle bar.
Most (all?) Swedish weaving books advocate you tie "a half rosette" at each end, to facilitate adding or subtracting heddles from any end of the bar.
The "half rosettes" can be difficult to tie - but I learned a trick. I describe it (with words and pictures) on my website: go to www.bergdalaspinnhus.com, choose "about weaving" and then "to secure lease sticks". This way of tieing "security strings" work for lease sticks, heddle bars, apron rods... most security strings you can think of.  (Thank you Barbro!)

Karen (not verified)

Got it.  Thank-you very much.

Karen

kerstinfroberg

just testing what happens if new comments are added to old topics...

Submitted by Anonymous (not verified) on