I purchased a used old Schacht rigid heddle loom and it came with several miscellaneous items.  I took lots of pictures and hope folks can help me identify these items.

These pieces are a mystery to me.  There are 4 in total and each measures about 6" long and 1" wide.  Any ideas?
 
And I believe these are weaving swords.  I am curious why they have this large (about 1.5" across) hole at the top.  
 

Then, there are two round sticks that are 1" diameter and 18" long and they both have a groove down one side.  Are these attached to the warp and cloth beams and the warp threads tucked into the slot?

Thanks in advance for any ideas, suggestions, assistance.

Claudia 

Comments

jemwork (not verified)

Could the four plastic sticks be legs? the slot end would fit over a screw, with a nut to tighten it down and the flat end would be the foot.

No idea about the dowels. Embroidery frames use a slit dowel to wind the cloth around, but thats fabric already, not just threads. I'd hate to try adjusting tension.

rigidheddlewea… (not verified)

Looks like they used cross stitch frame dowels to replace what was lost/broken or they've used them as lease sticks. I've used cross stitch frame dowels for all kinds of things too.

The holes on the swords, I'm guessing, is for hanging on the wall or peg of a warping board when not in use or maybe pulling through rags?

Claudia Segal (not verified)

That helps, thanks.  I thought perhaps the holes in the swords were for hanging but wanted to be certain I didn't miss something.

Claudia

Submitted by Anonymous (not verified) on