Hi out there,

I have a Union36 and want to make something with an even number of sections warped on the beam so... do I just work off center or do I warp a half section on either end?  One way must be better than the other. 

Saw some amazing projects going on in what's on your loom.  Has me wanting to do/learn more!

Thanks, Mary C

Comments

Alison (not verified)

Hi Mary,

I haven't worked on a Union36 but have worked with sectional beams.

Work off center.  It is only an inch or two (depending on the spacing of the sectional beam) and shouldn't cause problems.  If you put 1/2 of a bout on each side, the tension on those sections will become increasingly different from the other sections.

If there is something aobut the Union36 that makes working off center particularly problematic, you can wind whole bouts on either end but only use 1/2 the threads.  That wastes loads of yarn/thread though.

Good luck with the project.  I also get inspired by seeing the projects people have posted.

Alison

 

Submitted by Anonymous (not verified) on