I am working a project that is really confussing.  I'll try to keep this simple.  For my Warp Sett, I counted 8 dents per inch.  My e.p.i for the bamboo I am using is 30.  My teacher suggested writing in my project planner, 16 epi., which is 2 strings per dent, per 8 dents (one inch).  I wound up with extra strings.  After I did all the math over again, I realized 15 (half of my epi) would make everything add up.  So, first why does half of my epi equal my sett instead of the full inch (15 vs. 30)?  Also, it seems like my teachers suggestion of 16 would work, but it came out to much.  I'm really confussed.   I'm doing a new project and need to know if I go by the epi of the thread for the warp sett OR by the number of strings I will put in the dents per inch.  Ex. ( I want to do one thread every other dent with a warp thread (4 per inch).  However my epi of warn I'm using equals 8 ( one per dent or two per 2 dents).  The math doesn't add up to what I want unless I use half the epi why is that so??  I'm sure my question are clear as mud and am hoping someone has clear enough vision to see.  Many thanks in advance.

Here is a few pics of the current project I am referrring to... http://practicalcreations.blogspot.com/2011/08/bamboo-scarf.html 

Sewderf

Comments

Sara von Tresckow

You really need a good book or two on weaving. We don't usually refer to warp threads as "strings" and it is apparent from this post that you have quite a bit to learn before you become independent in weaving.

By e.p.i. do you mean the number of wraps your yarn has per inch or the number of warp ends per inch in the project? If the 30 is wraps per inch and the structure a tabby, then half (more or less) of 30 is your sett - the 16 ends per inch. You don't want to put your threads so close that they touch except for projects where only warp shows.

If your project sett is 30 ends per inch, your threads would wrap at about 60 per inch. These are important distinctions, and while your "teacher" appears to be helpful, you are also expected to learn these calculations on your own and not just wait to be fed.

sewderf

Sara,

I visited your site, very nice.  I had come across it several months ago.  The flax really caught my attention.  I'm really interested in one day weaving my own linen.

I have Learning to Weave.  I did look up how to figure the sett there.  With that the 15 epi (1/2" of 10/2 yarn) is what I should use and did wind up using in my math calculations.  This worked.  I came out with the correct number of ends.  But where I was confused was with the 2 ends per dent in 8 dents equals 16.  However that left me with too many ends. 

So I should use the epi of my yarn to figure the sett and not the dent/ends ratio?  This is what I got from the book.  So were does the dent/ end ration come into play?  I'm sure all this is simple and I'm probably over thinking this, lol.

Bonnie Inouye (not verified)

It does sound like you are confused! To determine sett, you can follow a project recipe in a magazine or book or a kit. Otherwise you can look up the recommended sett for your warp yarn using the weave structure you want to weave. For example, if your warp is 10/2 cotton and you want to weave a twill, then you can look this up. There are charts in books and online. A popular one is from Handwoven magazine.You need to know the fiber and the size of your warp yarn.

Sett is the same as epi if you use inches. Epi stands for ends per inch. (Many countries use the metric system now.) It isn't something you count with the yarn. It is something you learn. Or you can follow the Ashenhurst formula if you want a more complicated way!

You wrote, "For my Warp Sett, I counted 8 dents per inch.  My e.p.i for the bamboo I am using is 30."

In that case, it sounds like you need to sett at 30 ends per inch. 30 epi.  Are you following a pattern from a magazine? What size of bamboo yarn and what weave structure?

 "My teacher suggested writing in my project planner, 16 epi., which is 2 strings per dent, per 8 dents (one inch)."  I do not understand this at all. Why would she suggest 16 epi of your pattern calls for 30 epi? Did you change the yarn size, perhaps?

When asking for help with sett, you can give the fiber (bamboo) and the size (what size?) and the weave structure (lace? plain weave? twill? satin? Each of these needs a different sett for any given warp yarn.)

Bonnie Inouye

Sara von Tresckow

Chandler's book is incomplete at best, do consider:

Laila Lundell "Big Book of Weaving"

Rachel Brown "Weaving Spinning, Dyeing"

Shirley Held "Weaving"

Anne Field "Ashford Book of 4-shaft Weaving" 

to name a few that contain extensive information about the entire weaving process. Weaving is not like knitting a scarf where you learn two stitches and go back and forth until finished - you need to know about materials, drafting, use of equipment and much more - it takes most of us several years to really get up to speed. Practice, perserverance and willingness to learn from quality information are paramount.

sewderf

Bonnie and Sara.

I really appreciate the help.  With the mention of weave structure I understand a little more.  Also, mentioning the epi and dent ratio has helped a little.  I'll definately be looking into those books as well. 

This is only my second project, but I was determined to learn everything at once, lol.  When I had my first lesson it did amaze me how much math was involved.  This made it all the more interesting to me. 

I do appreciate the experience and wisdom from those who have been doing this awhile.  Many thanks for your help.

Submitted by sewderf on