Hi All,


This is my third post on the forums, (well not sure where the other two went, the search did not find them, perhaps they are in a group somewhere and anyway one is still in a moderation queue, the one with all the interesting links). I am mostly an armchair weaver but my mom and I have collected a number of looms over the years and some of my aunts weave rugs so there is familial familiarity with the craft. I am based in Finland and a idle Jacquard loom has come up for sale and I am the curious sort and love old mechanisms.

 

Air assisted iron Jacquard head on modern hand loom with assisted takeup


I have made an offer on the loom but cannot go higher unless I know I can dispose of the loom or at least the head.  I figured even if I cannot get the Jacquard head used (complexity, card generation, machine headroom, over 3m) I could add some regular heddles and make use of the professional take up beam system it seems to include.  While the vintage head does attract me I would likely get more use out of a computer dobby in my own experiements.

 


It looks like there is some warp ready to be tied off, perhaps sufficient for experiments. It has 416 hole positions and is strung with 6 repeats (2496 ends), the loom looks to be 1.5m to 2m working width, I have just seen a few photoes and not even sure if they are current. No accessories or documentation is mentioned so it might be a big learning experience, I would also need to get a compressor with a tank to operate it.

 


I just wonder what such a loom would be worth in Finland or elsewhere?


Does anyone recognise the type of head or is there a catalogue of types anywhere?

 

I can collect it in Finland myself after dissasembly and store it but shipping it or even the Jacquard head out of the country would be expensive I think.

 


Regards


Kalle


--


Lahti, Finland


Don't settle for the silver lining on your clouds, keep an eye out for the gold trim as well.  - Kalle Pihlajasaari 2009

 

Comments

Sara von Tresckow

Your thinking about converting the base loom to computer controlled dobby mechanism is good. These old mechanical Jacquard devices can be made to work, but the biggest issues are with the ability to punch cards accurately and tie them together so that they actually weave a pattern correctly. Often, the loom and head are saved and the punching machinery discarded.

You really need to visit the loom and evaluate the condition of the loom itself - is it square? Measured diagonally front to back, both sides need to match or you will have issues with poor quality fabric. Are the other parts in good working order?

It appears that Toika could make a dobby head to fid a loom of this type. That would work without compressor and you'd be able to change your designs far more quickly than with the Jacquard head.

Submitted by Anonymous (not verified) on