Hello.  I am new to weaving and new to this site, so please forgive me if I have posted this in the wrong place!  I have done some rigid heddle weaving and am now looking to move onto a floor loom.  I have the physical space at my house, but not quite the financial resources I would like.  A family member is a part-time antiques dealer and he has a loom he is willing to lend me for now.  The problem is, it came as part of an estate that he bought 15 or so years ago and he is not a weaver.  He believes everything is there as the woman who owned it was using it up until she died.  He also believes there is a name on it somewhere, but he doesn't remember what it is.  My husband has seen this loom and says that there is currently a cloth on it that appears to be a rug (or other heavy fabric) approximately 36 inches wide.  Before I (well, actually my husband!) lugs this loom to our house, I have a couple of questions.  First, if it is a loom that is suitable for rugs, can you also weave more delicate items (shawls, blankets, etc) on it?  And second, are there resources out there for people like me who may be unsure of what type of loom they may have?  If it is from a company that is still around, will they provide information on their looms even though they may not be making that model anymore?  I am more than happy to fiddle around with it to figure out how to make it work, but in case I get stuck, is there someplace I can turn to?  Thank you so much in advance for any assistance you can provide!

Jenn

Comments

Aunt Janet (not verified)

Jenn,

   Yes, go ahead and have him lug it home.  there are lots of resources right here on Weavolution to help you learn how to use it.  And yes, you should be able to weave more delicate fabrics on a good sturdy loom.  the Weaving 101 is a good place to start.  If you take photos, or send the loom name here you will get advice and identification on that loom.

Have fun.

Aunt Janet

lindi (not verified)

I had almost the same experience--but the loom works great (after 25 years)--and I have done all types of items on it from heavy wool to thread work. Enjoy the process and everyone here will help!

stinkbug (not verified)

Thank you Aunt Janet!  I am glad to hear that it should do what I would like it to.  I will see if it can come home this week.  I am glad to have found this site and I can't wait to get it set up!

Jenn

stinkbug (not verified)

thank you lindi.  I am excited to get this home and get started.  I am glad to hear I am not the only one who has taken on a loom in this manner!

Jenn  :)

Bonnie S. Carter (not verified)

  Normal 0

Hi Jenn, I was given an old barn loom in the early 70's and with a little work learned so much about looms. Had a time figuring out how the break system worked but found I thought it was more complicated than it really was. I wove lots of different things on it but found because it had a very heavy beater bar it did excellent rugs. Because it was hand made from very heavy timbers I found it worked best for me as a 2-harness loom instead of a 4. It weaves 40" in width and I have the original bamboo reeds. It is over 200 years old. It has starred in the movie "Queen" and today it is on display at the Visitors Center here in Savannah in an exhibit called “ Under Cover”.  This loom brought me a lot of joy and began my life long study of weaving. I'm glad to see you are going to give it a try. Wishing you all the happiness I have found.

Bonnie S. Carter


Claudia Segal (not verified)

Is that you weaving on your "old barn loom" in your weavatar?  Looks like a very heavy loom.

Claudia

Michael White

Stinkbug, let me know where you are located. I will post a list of guilds in your area. Sidenote, Claudia, Bonnie's loom pictured is not a "old barn loom"

Michael

kerstinfroberg

Just curious - how do you define a "barn loom"?

Joanne Hall

Hi Stinkbug,

Before the discusion continues on barn looms, it would be good to know the name on the loom you are getting.  Barn looms usually do not have names on them, so this loom is probably not one of them.  When you get the loom, tell us the name, or send a photo.  We can be more helpful then.

Joanne

whiteoakgrandmother (not verified)

A subject dear to my heart! Barn loom means different things in different areas, and different things to people within an area, so you may get a lot of different answers. But generally, "barn loom" means a homemade loom made of heavy mortised and tenoned timbers. They are often crudely made, but some are quite finely finished. Woods used are usually selected for their properties, rather than a loom being made all from one wood like a piece of furniture. In my area the frames are usually white oak, the warp and cloth beams hard maple, beater frames hickory, etc. A "five foot footprint" is common but not universal. The front posts are sometimes the same height of those at the back, but many barn looms are styled more like a Glimakra, but heavier. I have only seen ones that are counterbalanced since that is easier to construct. There are both two harness and four harness versions. Some work exceptionally well, some do not.

Joanne Hall

I have used these looms in Minnesota where I teach and we use them in my classes.  I prefer to call these looms 'immigrant looms' or even 'traditional looms' as they are not that old, mostly about 100 - 150 years old.  They were made by Norwegian, Swedish and Finnish immigrants.

Joanne

stinkbug (not verified)

Hi Michael.  Thanks for offering to point me in the direction of local guilds.  I live outside Elizabethtown, PA.  E-town is located in Lancaster County and is fairly close to Lancaster, Hershey, and Harrisburg.  While we might look to be geographically close to York, there is no great way to get there and it takes close to an hour.  (If I could forge the Susquehanna River that is about a mile and a half from my house, I could be there pretty quickly!).

As for the discussion on barn looms... from the descriptions here I do not believe that is what I will be getting.  I am hopefully that my husband will bring it home this week, but we are headed to NJ for the holiday, so I may not be able to post any pictures until next week.  Thanks to all for being so quick to respond to my plea for help!

Jenn

Michael White

Jenn, there is a spinning and weaving guild in Lancaster. http://fiberarts.org/directories/guilds/Pennsylvania

Wait a couple of weeks and you can forge the Susquehanna after it freezes.(g) I know where you are, I have kin folk in PA. NY. NJ. CT. ME and other parts of the country.

Enjoy your Thanksgiving days with your friends.

Michael

Beth P. (not verified)

Hey Jenn,

Make sure you vist The Mannings in East Berlin PA.  The weaving instructor there is Tom Knisley, he is amazingly knowledgable about looms and weaving!  The shop is well stocked too!

Beth

steve104c (not verified)

Stinkbug, If this loom can make rugs, then it will also make delicate items. Not all looms can make rugs. But all looms that can make rugs can make most everything. Most rug looms are large, and heavy because of the heavy beating needed to make the rugs. But they can also make delicate stuff too. Kind of like some of us men, tough yet gentle when we need to be. At least that's what my wife says about me..........Steve.

stinkbug (not verified)

Thanks for everyone's help with this. The loom finally made its way to my house last week, just in time to join us for the Christmas madness! I must say I was a little disappointed, but can't complain since it was free. There is no name on it and it appears to be made up of pieces from at least 2 different looms (some of the wood is extremely old looking and the rest is newer looking, although it is by no means brand new). The reed that is it measures 40", but it could probably accommodate up to a 48" reed. It currently has 2 shafts/2 treadles, but looks like it could easily accommodate 4. I am guessing it is a counterbalance because the 2 shafts are suspended from the same 2 pulleys, making one go up when the other goes down. The warp beam is rather large and came with I don't know how many miles of cotton wound around it. It took 2 people to move just that one piece. There were rusted out nails separating it into 1 inch sections and the cotton was yellowed and smelled of mothballs, so I hacked it all off. (It was also very tangled). Since it came with no directions, it took us the better part of an evening to assemble it, but the good news is now I know what each piece does! I just ordered a new reed and some heddles since they were both rusted as well. Can't wait for everything to arrive so I can start to play. Happy Holidays! Jenn

Michael White

Jenn, Have a Happy New Year, enjoying your "new" loom. The nails on the beam make this a sectional beam. If you are not planning on doing sectional warping you can just remove them. Sent a picture of your loom and keep us posted as you work on this loom.

Michael

Joanne Hall

Hi Jenn,

If you write to me at [email protected] I will send you some instructions which would be helpful for this type of loom.

Joanne

stinkbug (not verified)

Thank you Joanne. I will send the email now. Jenn
Submitted by Anonymous (not verified) on