I have two warps, one of 10/2 cotton, the other 10/2 tencel, and will be weaving the same scarf with each of the different warps. I'd like to tie the ends together so that I don't have to dress the warp twice. As long as I use weaver's knots, I shouldn't have any problems with tension, will I? Any suggestions are welcome! Monica

Comments

laurafry

Yes you can do that if the warps are the same threading. Cheers Laura

Broderie (not verified)

another warp to an existing one can be time-saving. there are 2 ways to do this: at the back, behind the heddles, and in front of the reed. If you tie at the back you will re-thread your heddles, if you want the same threading, tie on in front of the reed.

debmcclintock

Broderie, I tie on from the back AND keep my threading. It can be done. See my project post above. I have a 2nd warp beam and rotate out the beams. One for weaving, one for prepping the next warp. Works nicely. Front tye on works well also. Same prep, just have to think thru equipment on hand and proceed within those constraints.

kerstinfroberg

My drawloom-weaving friends all tie on at the back - without cutting off the piece woven. They say (I've never done this myself) that, with careful tying, they can then get another piece out of the first warp, thus using all of the otherwise very long thrums you get on a drawloom...

Submitted by Anonymous (not verified) on