is there an easy way to lower the treadles on my gilmakra 8h countermarch after i have tied them all up (all 80!)? i tied them all too low at first and re-tied them all and now they are too high.my knees are hitting the breast beam for heaven's sakes...

Comments

Joanne Hall

Hi Spring,

Before making the change, I would check a few things.  Put in the locking pins and make sure the shafts are lined up and that the lamms each have space above and below to move.  Then remove the locking pins.  If the shafts fall, contact me at [email protected] for more information. 

Then, push on each treadle with your hand and watch the lamms.  Be sure that the lamms are not touching the shafts or the treadles. If the treadles are too high, you will see which treadles need to be lowered.  Lower those first.  Maybe you do not need to lower all of them.

Joanne

 

kerstinfroberg

I always have my "adjustment tails" on top of the lamms instead of under the treadles. (I didn't think this was controversial, until I did it on a class loom once... what a to-do there was!)

To my mind, it is so much easier to see and do with the adjustment space on top.

EvaHall

Of course Kerstin!

I had never thought of that, but will try it for my next project.

Thank you!

Claudia Segal (not verified)

kerstin, What a great idea. I am struggling to get the texsolv pins in under the treadles on my new Julia. Adjusting things at the lams make much more sense. What do you detach when you put on a new warp? Do you detach things at the lamms? Thanks, Claudia

Joanne Hall

Hi Claudia,

For the Julia treadles, you can turn them sideways to put the pin in.  That way you can see what you are doing.  You can see how the treadles are attached with the exta cord for doing the initial treadle tie-up.  When you have the treadles back on the metal rod, you will not have to make many adjustments.  For that adjustment, the treadles are then fixed, but the practice you did with the first tie-up makes it easier to put the pins in. 

Of course, you have experience with countermarch now and you can make any changes you want to the methods of tie-up.  The reason I don't put the pins on top of the lamms is that I then have to hold the treadle up to take the weight off the cord.  When the cord is pulled with some weight, it is harder to open the hole to put the button in.

I make any final adjustments to treadle cords after I have treadled the sheds.  I make those adjustments while standing at the front of the loom.  Then the cloth beam is in the way of reaching the lamms.  So, it is easier to make the adjustment under the treadle.  But, you can put pins both under the treadle and above the lamm.  Then you have a choice of how you want to make the adjustment.

Joanne

kerstinfroberg

Different perspectives are good!

Anyway, to answer Claudia: I have copied (rather "been inspired by") the Öxabäck method - they have some eyes on the treadles, a pin tp go through rings at the end of the treadle cords (unfortunately, this isn't visible on their web site - perhaps Sara can give us a picture?). Thus: I added key rings to the end of all my cords (16 shafts and 20 treadles - that means 320 ties if maxed). My treadles already had eyes, so I "only" had to make the holes in the lamms a bit bigger to accomodate texsolv (that meant drilling into 640 holes).

Now my tieup looks like this (pictures taken from the back - as Joanne says the cloth beam is sort of in the way):

As to what I detach for a new warp: I nearly always free the shafts from the upper lamms for threading. (If I don't have a very wide warp, I let the whole treadle package help stabilize the shafts while winding: push the heddles to the sides, wind through the gap in the middle)

Threading completed, I re-hang the upper lamms (yes, heavy with all treadles attached), detach one treadle at a time for putting in the tie-up. When that one treadle is "corded", I put the pin back in, and go on to the next treadle. I have tried doing the tie-up ("cording", obviously) lamm-by-lamm, but *I* find it easier to keep my place when doing it treadle-by-treadle. I don't worry overmuch about cord lengths (though, of course, 30 yrs with this loom has given me more than an inkling as to the proper length/slack in the treadle cords). When tie-up is done, all pins in, I remove the locking pin (and do not worry if the shafts fall), treadle and evaluate all sheds.  Then I do the necessarey adjustments, treadle by treadle. - Sometimes that results in uneven treadle heights, but I don't worry about that, either: every time I am changing treadle (when weaving), the next treadle is never to be found at it's start position/height, anyway.

Remember: whne weaving, it is the SHED (floor) that counts! If the top of the shed is not even - so what? If the warp is not nice and perfectly straight when not weaving - so what?

- I admit some of my weaving teachers would have a fit if they saw my loom, but: so what? We were taught to strip the loom(s) down to the bare frame after each warp: no treadles attached (go in the bin by the door), no shafts attached (heddles counted and tied in the green bucket, top shafts in the right-hand bin, bottom shafts in the left-hand) - no lamms (short lamms go *here*, long go *there*)... you get the picture.

Once I had mounted all 20 treadles of my very own loom, they have never been off. On the occasion, I also leave unused shafts and lamms on, but never for longer warps (they *do* get in the way, but for one or two shawls that's ok - if I know I will use them for next warp). 

...now you know my dirtiest secrets...

kerstinfroberg

and yes - I have been accused of being untidy, with this kind of tie-up.

However, I save *real* untidy-ness for other things...

Joanne Hall

Hi Kerstin,

Is this loom a Glimakra?  Did you special order this loom with 16 shafts and 20 treadles?  16 shaft Glimakra looms are available today, but were not listed in the Glimakra catalogs 30 years ago. 

Joanne 

spring k (not verified)

a friend recommended that i move the shafts back a bit on the frame before i do anything. being new to glimarkas i had forgotten one could do this... AND IT WORKED! i am not sure why, but somehow moving the shafts back lengthened the treadles just a tad.

and the reason vavstuga's handy system of tying up wasn't working for me is because my used glimakra came with 12" heddles which throws becky's system off.   boy,i am learning a lot!!!!!!

Joanne Hall

Hi Spring,

Yes, for about a dozen years, the heddles sent with the Glimakra Standard loom were longer than what the factory recommended.  And that does complicate the tie-up.  Pushing the shafts back will make the shed smaller.  I just tried it on my loom and it did not put the treadles down lower.  What change did it make for you?

Joanne

kerstinfroberg

My old loom is a no-name old one - when I bought it (some 30 yrs ago) it was a pile of sticks. Assembled, it turned out to be a 20-treadle loom, with several other incarnations possible. It had one set of dräll pulleys for 8 shafts (that could be used for 16 - see for instance the Ekenmark book cover), it had dräll pulleys for 10 shafts (looking more "modern", or at least not as old). It also had a countermarche with one set of horizontal (what's the word? lamms? jacks? the ones on top of the structure... a similar is depicted in Cyrus Manual of...). It also had two bags of unsorted cotton heddles of two lengths, and a number of sticks and things. I was able to assemble a 13-shaft Cm with what I had, and wove on that for some time. (There were lamms for 16, but the top bit lacked some parts.)

As I did not like the CM (that construction means that the shafts move from, in my case, right to left when the shed is opening), I bought an "off the shelf" Öxabäck CM assembly (just the top bit). I chose the Ö CM because 1. I like the vertical CM and 2. they offered one115 cm wide, which was the weaving width of my "find". They (Ö CMs) do not come with 20 shafts, although I think they can easily be extended, so I decided 16 was enough.

After a while I ordered a second back beam from Öxabäck, and have thus added another (maybe 2) "incarnations" to my old loom. It is not perfectly balanced, but it doesn't matter for the actual weaving. It has 3 possible locations for the lamms, but I have decided the 2 top positions are good for most of my weavings. The "only" problem is that the 3 leftmost treadles are too near to the pivot point, so I have avoided using all 20 treadles when possible.

Here is a bit of the story, and another picture (which, incidentally, shows that the shafts have sagged a bit for this particular weave, a 12-shaft twill variation with horsehair as weft (IIRC). Sometimes they do (drop a bit), sometimes they don't - it could probably be fixed by tieing up extra treadles, but I don't bother as the drop does not interfere with the weaving.

Oh - and it is extra long, so I could probably add a 50-draw without problems, judged by a friend's damask loom and its dimensions. Due to the fact that it comes from Härjedalen, and knowing that the Ekenmarks were teaching in those parts, I suspect it is a home-built loom inspired by them. Who knows - maybe it *had* a draw attachment one time?

The blue line in the picture on my blog: the loom had not been stored in an optimal way, so the sides were somewhat warped. The blue line is forcing the top right in line with its bottom, and the CM is forcing the top left outwards, to align with the bottom of the frame. This means the beater is not *exactly* (but nearly!) parallell to the breast beam, BUT I have not been able to see any problems with the cloth, not even at full width (115 cm). ... once I wove drapes of 120 cm width - that worked, too :-) I used a temple, so that the cloth was flat at the fell, but let it fold at the sides to get over the breast beam. I should admit that I got tensions problems later, but the first 6 meters were quite ok. However, I will not do that again.

When I got a fan reed, I drilled a couple more holes at the top of the beater swords(?), and did not have to buy the special (and expensive!) thingie to control the reed height.

To me a loom is a tool, not a piece of nice furniture...

Sara von Tresckow

Kerstin,

I also have no clear photo of the Öxabäck ring tieup system. Your photo is pretty clear - what the Ulla Cyrus loom has that others do not is shaped treadles. The treadles have a curvature that mimics the cord adjustments from back to front and the metal rods are divided into sections that correspond to each set of 4 shafts. This way all the tieup cords are the same length. When changing the tieup, one moves the short and long cords from place to place, but there is no length adjustment.

The Lilla looms that we sell have standard treadles that allow the weaver to loop the cords around the treadle and peg at the lams. It one substitutes all long cords, changes to the loom involve only the pegging at the lams - upper or lower depending on the project.

Honestly, since people have started doing the cords bottom to top, it simplifies the countermarche loom greatly.

I have never disconnected lams or treadles when warping except when warping the drawloom and need to unhook the ground shafts and move them to the back beam for threading. For that I just unhook the connection to the upper lams and the shaft hanging hooks. I had one loom where the countermarche removed easily and I put it down on the frame to put the shafts out of the way when winding on, but for most projects, simply moving the heddles to the side and running the warp through the empty space works fine. I learned to weave in Germany where efficiency was of importance so using flanges with no packing material on fine, dense warps was common and I never observed weavers unhooking lams and/or treadles to warp. Certainly no one ever removed unused shafts - extras just hung out of the way until needed. The latest in "valet" warping that I've seen is the technique that Andreas Moeller uses. He places a few planks in the loom frame, winds the warp chain over them much as one would the tension box for sectional warping and gets the extra length and tension withont taking up space in the studio. His approach to weaving is similar to what I ovbserved when I was starting out - looms are tools not furniture, showy methods are not desirable, good cloth is what the weaver is after.

 

kerstinfroberg

Well, I don't know that my (or, for that matter, Öxabäxck's) warping valet "takes up space". Mine is home-made, and I haven't seen an Ö in person for some years, but I think it is approximately the same size. Mine hangs out over the breast beam for about 40 cm, which is less than the space I need for the loom bench, when weaving. Yes, it consists of two uprights that have to be stored somewhere when not in use - but I suppose Mueller's "a few planks" have to be stored, too?

If you look at the overview-of-the-valet picture here (click to biggify), you can see the unused shafts hanging on the loom frame, back (almost) under the warp beam, so they don't take up extra space, either.

Flanges were more common earlier (when? I don't know - have never seen them sold, for instance), but the use of them is all but forgotten. In a local museum I saw a loom (used for demo-ing) with flanges, pushed to the sides. The apron rod had been shortened to fit inside the flanges, and the warp had been wound with sticks. When I asked why, no-one could explain better than "this is the way we always do it".

Submitted by Anonymous (not verified) on