I'm still a very new weaver and always overwhelmed by the amount of information on this weaving site, so please accept my apologies if this issue has been addressed!  I'm a bit confused about the correct foot I should use to press the treadles on my 4-shaft / 4 treadle countermarch floor loom. Do I use just one foot for a sequence moving left to right, for example? Alternate feet (ex. left for #1 & #2 treadles /  right for #3 & #4)?  I am having 2 more treadles made for my loom. How does that work for 6 treadles? Also, I have developed some problems (unrelated to weaving) with my feet. Can one depress the treadles with the entire foot? Thanks to all!

Comments

sally orgren

I used my left foot for left treadles, right foot for right treadles.

With 6 treadles, I tie up my "tabby" on the outer  treadles, so if I am weaving plain weave, I am alternating feet so I am balanced on the bench.

I would tie up six treadles as: A1234B, or, B4321A. (Tabby A = 1+3, B = 2+4)

Keep in mind, one treadle can be tied to more than one shaft. So one foot could step on a treadle connected to 2 or 3 shafts. On my loom, treadle 1 lifts 1+2, treadle 2 lifts 2+3, etc. 

I don't understand your question about depressing a treadle with the entire foot. How do you do it now?

Gone

ya put yer right foot in...ya take yer right foot out.

What feels comfortable and efficient to you? I have a numb right foot so I do everything with the left foot. But I tie up  the tabby on the right side and force the foot to do something.

With 4 treadles you can tie up so you can cover everything in an efficient manner. You would have to double treadle some of the time but it's a good tip from Jim Ahrens via Peggy Osterkamp.

http://peggyosterkamp.com/2011/06/try-tying-up-your-treadles-this-way/

 

 

Lenore

Thanks so much to Sally O. and Tom Z. for responding to my foot treadling question! Seems that there is no incorrect way to treadle - just whichever way is most comfortable. Good to know! Don't want to develop bad weaving habits!

Joanne Hall

If you are not comfortable or want to help your feet, it is usually possible to lower your treadles.  This makes treadling easier.  Many weavers, when they have a choice, will tie the treadles too high.

And if you have a countermarch, be sure that the shafts stay in place when you are tied up and take the locking pins out.  If they fall, improve the balance to make the treadling easier.

Joanne

reneesmom

I have a floor loom that I got from my mom. Unfortunately, I got the loom 10 years after she passed away.......so I have learned by google and trial and error........the loom I have has 4 shafts, 6 peddles and are tied up as: peddle 1 lifts 3 & 4; 2 lifts 2 & 3; 3 lifts 1 & 2; 4 lifts 1 & 4; A lifts 3 and B lifts 2 & 4.......I have posed two rugs that I have made using pedals 1 and 3 repeatedly. We also thread from the back side going a basic 1 ,2,3,4 through each heddle and repeating using 336 threads! What I would like to understand is the tie up .......first of all can you picture ithe tie up and is this anywhere close to being correct?

Submitted by Lenore on