Hello!!

I am a beginner weaver, researching my yarns. I have been struggling with the question what wool yarn I can use for warp. Ideally I wanted to use thin yarns, such as from 2/10 to 2/20 worsted wool yarns. I want to make double weave upholstery that is 100% (or mostly) wool, so I'd really like the warp to be wool too, but so far the wool yarns I have purchased snap relatively easily, especially the 2/20. I have not yet tested on the loom because I get discouraged that they snap when I pull on them, but maybe it would not be so bad once on the loom. The tension for the upsholstery though has to be relatively high.

Can 2/20 worsted or similar thin wool yarn be used for warp at all? Or would yarn that contains other fiber help for strength without taking too much away from the characteristics of a woolen cloth?

And/or any recommendations for tightly spun wool in the range 2/10 to 2/20 on the market? Other than the Jaggerspun Maine 2/20 line, I have had little success finding other wool in the US. And that one snaps when pulled.

(Just as a reference to something similar to what I would like to do, this designer weaves upholstery with wool with bit of nylon: http://www.eleanorpritchard.com/upholstery/upholstery?id=108)

Thank you for considering my question!

 

Comments

mneligh

Thirty years ago there was at least one other fine wool warp source, but I haven't seen it in a long time.  I use Jaggerspun a fair amount and am quite happy with it.  In coarser yarns there is the Brown Sheep warp and various other Navajo warps. Recently I got some fine wool  -- Yorkshire Wool -- from Webs, and also some fine cashmere.  I have not warped either project yet, though

The interesting thing about Navajo warp is that it frequently is at least part mohair, which has superb tensile strength.  Look for fine yarns containing mohair.  Likewise, check out Borgs of Lund -- they might have something.  

I frequently don't use yarns designated "warp" as warp.  Since my loom is capable of snapping the strongest yarn if overtightened, I have learned a couple of tricks:  

 The more absolutely even your tension, the less the strain on any single end and the less likely you are to snap warp.  This includes any tension issues from drawing in, so no drawing in! Heddles matter.  My flat steel heddles shredded 10/2 bamboo warp, but when replaced with inserted eye, I had no further problems.Any source of abrasion such as a rusty reed will significanly weaken fine yarn.If weaving on a jack loom modify the draft so that adjacent threads are not on adjacent shafts.  Using sizing on "sticky", fuzzy warp will help decrease friction and abrasion.  Worsted spun yarns are stronger than woollen yarns, and longwool breeds of sheep or mohair make a stronger yarn than softer-wooled, shorter staple sheep, all else being equal.  

Joanne Hall

You might also try Mora, 20/2 wool yarn from Sweden.  It is worsted, so it is smoother and not as sticky as other yarns.  That is important for weaving double weave.

Along with the loom and heddle recomendations, It is important not to stress the warp with a shed that is bigger than is needed.  Choose a slender boat shuttle and you won't need a large stressful shed.  A smaller shed also allows you to keep the tension tighter.

Joanne

 

sandra.eberhar…

I use 2/9 80%wool nylon 20% nylon made in Honora Spinning in RI for making fulled socks.  I bought undyed yarn from them, you can often find mill ends on Ebay from their sister company, J&M Dyers.  It's fairly hard spun and smooth, and very strong.  It would make very good upholstery.

dor4os

Wow, you have given me so many good sources and advice. Thank you for that! I am happily overwhelmed. I am looking into each of the yarns all of you have mentioned. 

And mneligh, thank you for the weaving technique tricks to keep the yarn from snapping! 

beaverly

Help Please: This discussion is interesting to me because I am trying to learn about yarn. In this post the subject is a 2/9 from a mill in Rhode Island (which I did not find in an internet search). My question is: Assuming this is a woolen-spun yarn, since it is said to be for wool socks which are to be fulled, how would the same amount(weight) of fiber and plys be technically described if worsted-spun (not worsted weight)? Would we still have a 2/9 yarn? What is the difference in the worsted-spun method that we ca Beaverly, p.s. Sure wish this message box and font size and font color were large enough for me to see. Seems like orange 8 font.

beaverly

Sorry, my finger slipped before I was finished.

The incomplete sentance should read:

What is the difference in the worsted-spun method that would result in a different specification than the "2/9?"

 

p.s.  Suddenly there is a black and white font of about 12 point.  Thanks to the fairy responsible!

Beverly ;-D

Joanne Hall

The size number is based on the weight and the thickness of the individual yarn.  6/2 is thicker than 9/2.  9/2 is thicker than 20/2.    You have to ask about whether it is woolen or worsted.  That is a difference in the way the individual thread is spun. 

Joanne

sandra.eberhar…

I think the problem is that beaverly assumed that since I was using this yarn to make fulled socks, it must be woolen.  That is not true.  This is quite hard spun worsted yarn that fulls and felts quite nicely. Worsted spinning puts the fibers parallel to each other, woolen spinning is a random orientation.  Hanora Spinning, (sorry about the misspell, but most browsers will deal with that) is http://www.hanoraspinning.net/.  Beaverly, if you are having trouble seeing the text, try increasing the magnification on your browser.  Chrome has a very convenient magnification feature.

dor4os

Hi big white sofa dog, in case you see this post, I was wondering when did you purchase yarn from Hanora Spinning? Because I called them and they refused to sell me. They basically said they are not interested in selling anything less than the thousands of pounds (not even in the hundreds). I was wondering if you have any recent experience with them?

Honeyfinn

To get just the wool warp you want, you could buy a fleece (or two), find a processor you can work with - most are really nice and very knowledgable about fibers, twists, blends (mohair blend makes the yarn even stronger), etc., and have your own warp yarn made. I have some of my wool made into tightly spun semi-worsted, 80/20 wool/mohair for warp, and can use a more loosley spun weft. For rugs, I use wool/llama for the weft, it is a bit stronger, but still soft. The biggest drawback is that it takes a long time from the time you get your fleece til you get your yarn.

dor4os

That is a very interesting suggestion! You mean like a place that spins yarns with machines? May I ask which processor you have used so I can look at an example? Thank you!

Ancient Weaver

Plying in the usual way (S/Z or Z/S) reduces strength, that's one reason why in ancient times they used singles for the warp, even when they used plied for the weft.

ReedGuy

Epic was a nice Worst spun 18/2 wool on cones. 4800 yyp. No longer made because the owner passed away I heard. I only have a couple cones here. I've made upholstery with it, but I used linen warp.

mneligh

I could suggest spin your own, but we were discussing 20/2 yarn, and my assumption is that if someone is a beginning weaver they would also be a beginning spinner.  (Not fair, I know).  Even for an experienced spinner, spinning a lot of 20/2 yarn is not easy, though it might be worth a try as a challenge.  Spinning Loft has some black Polwarth that could be used in such an attempt. A silk/wool or silk/mohair or silk/alpaca blend would also work.

One of my resolutions for the year was to master Orenburg style spinning (I can already do lace weight on a wheel).  Their trick appears to be using one strand silk and one strand goat hair in the yarn, and one could certainly take this approach to spinning your own extra fine warp.

Spinning your own does ginve you ultimate control.

Patsiemakes (not verified)

I myself have had problems with this very thing which is why I am now spinning my own warp 1" 1 treadle which makes for a very strong warp over 3 1/2" minimum staple length - it takes a long time to make a bobbin but I am hoping that this will work for me.  However I think I will have to leave the spun thread on the bobbins for a long time to settle -how would you size it after so that there is no friction?

 

Submitted by dor4os on