Have a RH loom, have used it twice so far, problem is how tight should the tension be.  On my floor loom I keep a firm tension.  On the RH my ends are beating down further then the middle, ending up with a upside down smile.  The warp on the ends appear to be tensioned the same as in the middle.  I also have a crack in the gear on the front of the loom.  The gear is plastic and someone told me I am tensioning to firm.  Waiting for a replacement gear now.

Comments

Karren K. Brito

Weaving tension depends on many things including the weaver's perference, the structure of the web, the yarn and beaming.  I like to work under a high tension and I do many things on the rigid heddle loom.  The loom should hold what ever tension you like.  Sometimes the problem is the warp beam.  If you like to weave under high tension then the back beam with the warp needs to be wound under high tension too.  When wound under high tension the beam should be uniformly hard, not soft and mushy.  If you try to use high tension on a soft mushy beam some warp threads cut thru or fall off the ends. Keeping the selvege warps up on the bundle can be a challenge when winding the warp.  What does your warp beam look like?Also one big difference between a floor loom and the RH is that on the RH you can beat with the heddle at an angle to the fell line, most exagerated at the selveges.

What kind of yarn are you using?  And what is the sett and how many pick per inch (cm) do you want, are you weaving a balanced weave or maybe weft dominate weave?

Joanne Hall

This comes from leaving the weft too loose at the selvages.   Some weavers do this to prevent draw-in, but it is the angle or leaving the weft loose across the warp that prevents draw-in. When the weft is loose at the selvage, that weft will beat down further, because it is tensioned more like one does weft faced weaving.  So, snug up on the weft at the selvage and then angle the weft to prevent draw-in.

Joanne

planttapestry (not verified)

So likewise, can I assume that a right side up smiley face means the selvage tension is too tight?

And is this the warp selvage tension or the weft selvage tension?

 

thanks

 

 

Submitted by Anonymous (not verified) on