I was recently given 8 huge cones of what I believe is some form of polyester (or some other synthetic yarn). I have always worked with natural fibers, never synthetic. Since I have a ton of this stuff that I got for free, I figure I should use it. It seems to be closest in gauge to a 10/2 cotton (perhaps a bit smaller) I haven't checked how many wpi. But before I start sampling things with it, I thought I'd ask and see if there are any tips to working with synthetics or differences from natural fiber yarn? Anything would be helpful!! 

Thanks,
JoAnna

Comments

Michael White

Joanna, here is a burn chart that you can use to check the fiber contain of your yarn. Do this out doors as it can be smelly and hazardous ( some yarns burn very fast). Sometimes I will pick apart the yarn and test each section. We one time tested a "synthetic" only to find out it was silk. It also dissolved in bleach (a other test)
Enjoy,

The chart below is organized into three main groups.  All fabrics either burn and must be put out or burn until there is nothing to burn, or they burn and go out on their own after a few seconds leaving remaining unburned fiber and are therefore self-extinguishing, or the fabric does not burn even with a flame held directly to it.

To identify the fibers in an unknown piece of fabric, cut off a snippet -- it's best if it's about 1" long and a triangle at most 1/4" wide (try to cut from one of the already cut ends or if testing fabric made into a garment cut from an inconspicuous seam allowance).  Hold the snippet of fabric in a pair of tweezers over something that won't burn or melt (an old tuna tin or glass ashtray is ideal) and with either a match or cigarette lighter put the snippet directly into the flame long enough for it to catch on fire.

Watch the snippet as it burns -- does it go out on its own?  Then it's self-extinguishing -- go to the lavender area of the chart.  Do you have to put it out or does it burn to nothing?  Then it's not self-extinguishing -- go to the aqua area of the chart.  Does it defy all attempts to burn it?  Then it does not burn and the small yellow section of the chart is where you look.

The further breakdown of the chart helps identify the fibers by the smell of the smoke it gives off in burning, and the ash or melted bead that remains after it has burned.

Remember that some fabrics are blends, and the blend of fibers may make the burn test an unreliable test for fiber content.  Also, some fabrics have chemical finishes and sizings applied to them that will alter the way that they burn, making them unidentifiable by this chart.

The chart itself is a gif and you can right click and save it to your own computer.  Once you do this, open it to print a hard copy (I keep one in the sewing room and one in my purse with collapsable scissors and a lighter in an old candy tin -- portable burn test kit!)  This chart will print on one 8.5" x 11" sheet of paper in the "landscape" position (sideways). 

 

 

 
 

 

lkautio (not verified)

Sample.  Shrinkage and fulling are apt to be minimal and different from a similar looking natural.  It may require a slightly closer sett and be less elastic in the weaving.  LeClerc carries a synthetic called Orlec in about that size range (an 8/2) and has projects using their yarns so you can see how other people have sett them.

http://www.mbrassard.com/produits-ang.html

http://www.leclerclooms.com/pattern/2007/Dec.htm

happy weaving,

Laurie Autio

JoAnnaWeaves (not verified)

Thanks, Michael!

I have actually already done a burn test on the yarn. It burns quickly, melts and leaves a hard black bead. The smell while burning is chemical in nature. I have taken a couple of textile classes in college in which we burn tested many fibers. This is what lead me to believe that it is a polyester/synthetic of some kind. It also has a bit of stretch to it. (more than a cotton yarn does) I assume polyester because it it one of the most common synthetic fibers. Do you know of any other tests I might be able to perform to find out any more information?

JoAnnaWeaves (not verified)

Thank you for this information! I've actually looked at this pattern before and had no idea what Orlec was. It DOES help to have some place to start. I will definitely be sampling before I begin any actual projects.

laurafry

One thing I've noticed with Orlec (orlon) is that it stretches under tension so be very careful when advancing your warp and try be as consistent as possible with re-applying weaving tension.

I've heard that some polyesters can be heat set and some people are using it to create 'permanent' pleats.  You'd have to sample to see if your yarn has this characteristic.

A really excellent book (if you like books) is A Guide To Textiles for Interior Designers by Jackman and Dixon.  Has lots and lots of charts and basic info on fibre characteristics.  It's my fav resource book.  A bit pricey new, but 2nd hand copies of the first edition can be found on the 'net fairly inexpensively.

Cheers,

Laura

Michael White

You can use "Fiber-Etch" a liquid (from Michael's etc) used in cutwork embroidery will dissove any plant fiber. This is a test to see if it is a blend. Cotton/poly etc. If you remember from your college work you can also use a microscope and other chem.

This is the other part of fiber testing that Cheryl gives to her students.

 

Five Simple Tests for Fiber ID
The means of fiber identification can be broken down into five smaller groups or tests. They are burning, chemical, optical, staining, and density tests. Each test has its own advantages and disadvantages. Most are cheap and simple identification techniques, which is good. However, most fibers would need further analysis to be certain about the results. A burning test can help determine the class to which a fiber belongs by observing how the fiber burns. Observing how things smell and char when they are burnt are qualities than can help. However, have to be careful with burning tests in order not to over-generalize as to the type of fiber. The most important burning test pertains to flame resistance. Chemical tests are cheap and simple methods to find a number of elements, but the tests are not quantitative. Also, the number of elements that can be detected is limited. So for more accurate analysis, better and more expensive equipment is needed.

Optical tests are easily the simplest test available, and the use of a microscope allows the observer to see the fibers up close. This is valuable because certain fibers have particular shapes which can be identified when viewed under a microscope. However, not much more information can be attained about man-made fibers by microscopic examination of the longitudinal section alone. Viewing the cross-section helps greatly, but preparing cross-sectional samples takes great skill and time.

Staining tests can help to show changes in fiber structure from one process to the next. If the fiber structure is changed, the dyeing color will be different from batch to batch. A characteristic that can be obtained from dyeing is whether the fiber is hydrophobic or hydrophilic, because hydrophilic fibers are easier to dye because they absorb water. Staining can be used to group fibers into three groups: cellulosic, protein-based, or man-made fibers, but the process is not good on deep dyed samples and chemical finishes can interfere with the process.

Chemical tests They are Acetone, Tetrahydrofuran, Methylene Chloride, and m-Cresol. As said above, there are five basic ways to fiber identification. They are burning, chemical, optical, staining, and density tests. They all have their own advantages and disadvantages and can help in certain cases for different fibers. Each test can lead to a hypothesis to help identify the fiber, but other tests are needed to confirm the hypothesis.

 
Submitted by Anonymous (not verified) on