I'm trying to improve my weaving practice and one area I'm looking at is my posture when weaving. How do you determine the most ergonomic height, angle and position for the weaving bench when seated at your loom?

Thanks!

Comments

sequel (not verified)

I don't use a weaving bench, I use a keyboard musician's bench.  It's adjustable 17" to 22 1/2" and very padded.  It's a Quik-Loc BX14 and sells for about $50.  The bench that came with my loom works well as a dust catcher and end table.

Joanne Hall

It would be helpful to know your height and the height of the breast beam.  These are critical for knowing what to recommend.  For instance, many looms are too short for most tall weavers and then the loom needs to be put up on blocks.  Some weavers are short and then the problem is much different.

Joanne

QuakerWeaver (not verified)

I'm 5'10" and the height at breast beam on my loom is 32".

Joanne Hall

Hi Quakerweaver,

You are tall and the loom is short.  Breast beam heights range from 32 to 36 inches. Is your bench height adjustable?

I would try putting blocks under the loom, maybe 2 or 3 inches and then see how it feels.  Raise the bench up so that your elbows are at or above the breast beam.  You may also need to lengthen the treadle cords to give you more leg space.

Joanne

sally_libby (not verified)

Look into Walt Turpening benches. He specializes is ergonomics. He customizes a bench using your measurments to your loom. My Husand has one and it is great. I have one on order. Here is his link: http://www.custommade.com/by/walterturpeningbsc

It is not as expensive as you might think. Sally

QuakerWeaver (not verified)

I appreciate all of the sharing.

Claudia Segal (not verified)

There was a discussion and ingamarie posted a formula developed by Walter Turpening re: measuring for a weaving bench height.  You can find the post HERE.  

This article has saved my back, quite literally, by measuring my loom and bench and how I am positioned at it.  Hope it helps.

Moe (not verified)

Not only are Walt's benches very comfortable but they are beautiful. He's a excellent craftsman.

dawnmccarthy (not verified)

I have a number of looms with varying breast beam heights.  I find if my elbows are a couple of inches higher than the breast beam and my knees angle slightly down toward the treadles, that is a good weaving position.  I highly recommend an adjustable bench as we are all different proportions.  Better to be slightly higher than too low.

 

Dawn

http://bloominloom-dawnmccarthy.blogspot.com/

Submitted by Anonymous (not verified) on