I recently bought some Misti Alpaca Lace yarn, which I measured to be 24 wpi. I'm using a 12 dent rigid heddle, but upon weaving, it feels rather slippery and is not easy to beat consistently. Do you sett slippery yarns at half density for plain weave, too? Or do you sett them closer?  Does it feel slippery simply because I've only woven with cotton yarns up until now? I *am* weaving a sample, but I'm still rather new to weaving, and any advice is much appreciated!

~Jen

Comments

Alison (not verified)

There are some yarns that seem to work better with a closer sett than the wpi would indicate.  I find that with Bambu, for example.  I have not worked with the Misti Alpaca but have felt it.  It is nice yarn! 

To answer your question a little more head on - how does the sample look?  Does it look more open that you're used to with the cotton (and yes, the cotton is easier).  How does it feel?  What type of drape are you looking for?   Since you're in sampling mode (good for you!), make more than one, trying different setts.  Then, after you wash them, see which one you like the looks and draft of the best.

 

jenadina (not verified)

Thanks for taking the time out of your holiday weekend to reply, Alison!

My sample was a little more open, but if I beat any harder, it goes weft-faced, which I don't want. I'm making a plain black scarf for my husband. He's not big on color combos and has said when I brought it up a long time ago that he would prefer a solid color, preferably black so it will go with anything (He doesn't know I'm making this, though, so I don't want to ask his direct opinion).

I've washed the first sample, which was plain weave except for one strip of windowpane...and it didn't full at all. The windowpane came out of hiding, but the tabby didn't tighten up. Not. At. All. It might be fine for a woman who likes lacy scarves, but definitely not for my husband!

My two 10-dent heddles should be arriving Mon. or Tue, but I'm not sure what to do because going from 12 epi all the way to 20 epi is kind of a big jump. I know there's some way to sett my 12-dent heddle more densely, and I will take a look through my Davenport books and see if I can find it.

Slightly discouraged, but SOOOO glad I made a sample,

~Jen

Edited to add: I was wrong; 150% density requires 2 matching heddles, which would be 15 epi with 10-dent heddles or 18 epi with 12 dent heddles. Adding this just in case anyone else is mistaken like I was!

Alison (not verified)

Jen,

Well, on Thanksgiving, I took a whole day away from the computer AND phone!  It felt very decadent.

I just saw now that you had answered.  Don't know how I missed it.

I'm surprised the sample didn't at least fluff.  So are you going to try a sett of 15?  Or is it so loose you're going to jump to 20.  it sounds like it is going to be a lovely scarf once you work the sett out.

Can you post a picture of your sample?  Did you save an unwashed sample also?

Alison

jenadina (not verified)

And I missed your response! I've been without internet for the last several days, but it's finally back :)

I did jump to 20, and it's much better now. I handwashed my original sample in warm water, and when it had no effect, I stuck it in the washing machine (we don't have hot water in our washer, so on cold) for the agitation. With that, the one line of windowpane I stuck in there showed up. The spacing of the plain weave didn't change at all, but the overall surface did get fuzzy. I didn't save an unwashed sample.

Knowing that the way I will be washing the final item won't affect the spacing, I didn't cut the 2nd sample off the loom to finish...the cloth looks good on the loom and I just started to weave. I do sort of wish I had gone with a twill, but I'm not unweaving a foot of fine alpaca, and if I start over now the scarf would likely be too short AND too narrow for hubby's liking. As it is, if he doesn't like it, I'll just keep it for myself so it's really not a big deal, especially since Webs has the yarn on clearance for less than $5 for 400 meters!

I've had one broken warp, which reminds me that I need to buy some T pins. Glass head pins work,  but they're fiddly to wind the replacement around!

Alison (not verified)

That is great.  I'm glad you found a sett you like.  I hope you post pictures of your samples and the final scarf.  I hadn't been on the Webs site recently.  Thanks for the heads up.

Still waiting for pictures of Adam's scarf too!

Alison

Submitted by Anonymous (not verified) on