The Sept 09 Rigid Heddle Beginner Project begins on Monday Sept 28 2009   This message thread will be the site for instructions, questions and, hopefully, answers.  

 

Comments

francorios (not verified)

The Sept 09 Rigid Heddle Beginner Project
begins on Monday Sept 28 2009
 
This message thread will be the site for instructions, questions and, hopefully, answers.
 
We will weave two cotton panels for dish towels
or place mats or little traveling hand towels.
 
You will need the following items:
 
One rigid heddle loom, with 8 or 10 dent heddle
One stick shuttle
White cotton worsted yarn, Peaches & Creme 14 oz cone is shown
Color worsted yarn for stripes, Sugar and Cream Hot Blue, Hot Orange, Hot Green are shown because my example has 3 color stripes.
 
Or you can use a variegated colored yarn. You need minimum one ball of colored yarn 1.75 oz
 
Be careful on your color yarn to avoid color bleeding into your white areas. I once bought some white yarn with green/red dye splotches (Bernat Handicrafter) and it turned my project pink. Red and navy blue are two colors most likely to run. Watch out for chunks of color sludge/dye stuck to the yarn. This should have been my clue to avoid that yarn or pre wash before weaving.
 
I like the Peaches and Creme and Sugar and Cream colored yarns because they have not run on me -- yet.
 
You will also need scissors, a ruler or measuring tape, a plastic craft needle or metal cross-stitch needle with a large eye for the yarn and some brown paper for rolling your warp.
 
We will start the beginner project on Mon Sept 28 2009 and we'll start from the beginning by  planning your project to maximize your chance of satisfaction with your project.
 
After planning we'll prepare some warp and warp up the loom. Then comes weaving with special attention paid to keeping the edges straight.
 
Then hemstitch for fringed edges.
 
And finally, wet finishing which is putting it through the clothes washer and clothes dryer.
 
I'll be posting daily messages about each part, should be four or five total.
 
In my fiber adventure, I find there is no one right way to do things. What I will share is the way I have found to get these things done in a satisfactory manner. There are many talented artists out there who can show you how to do many wonderful things with weaving.
 
But before we can run, we have to learn to walk. My goal is to help you get started. More on Monday, unless you have question about the materials. 
 
Have a good day!
Franco Rios
volunteer enabler

 

francorios (not verified)

Good morning,
 
Some people are not able to get cotton worsted yarn, but they can get wool worsted yarn.
 
Not a problem. If the wool worsted yarn will fit through your rigid heddle, you can use it for this beginner project. Because the goal is to make something using warp stripes.
 
So instead of planning for 16 inch wide cotton panels, wool weavers should plan on 8 inch wide scarf.
 
Be sure to have two colors that go well together or have nice contrast.
 
Have a good day!
 

PattyAnne (not verified)

I'm looking forward to doing this! Thanks.

BTW, francorios, I went to your website the other day -- wow, you have got some really interesting projects going on!!

PattyAnne

francorios (not verified)

Thank you PattyAnne,

The first part will be posted tonight ater I get home from work.

Have a good day!

francorios (not verified)

Welcome to the Beginner RH project
 
We're going to create something using warp stripes. The concept of warp stripes is to warp your loom with a base color to use as warp and weft. But to add some visual interest and style, we will use a contrasting color for some of the warp threads and will create warp stripes.
 
First thing is to decide what yarn will you use. If you use cotton, you can make place mats or dishtowels.
 
If you use wool, maybe you would like to make a scarf.
 
If you use acrylic, maybe you would to make a scarf, or place mats, or fabric to sew into a bag?
 
The following is from my blog, where I posted some of this info prior to this weavealong.
 


Here's the beginning of my next project. I'm going to make some cotton yarn dishtowels/placemats. The real goal is to get some practice on making nice edges and to get some pictures I can use for a weavealong tutorial. I'm going to weave the towels 16 inch wide by 27 inch long with the fringe. With about 10 percent shrinkage during wet finish (washer/dryer cycle) I'll have towels that are 14 inch x 24 inch.

The supplies: Erica rigid heddle loom, 8 dent heddle, two shuttle sticks, a pick up stick, white Peaches & Creme worsted cotton yarn, Sugar & Creme Hot Green, Hot Orange, Hot Blue colored yarn for the stripes. I used up a lot of green and orange on other projects, so I'll be trying to make minimal stripes on this project.

The project is 16 inch wide x 8 thread per inch for 128 ends. I'm going to have 4 ends each of each color for a small stripe x 2 stripes for 24 ends of color and 104 ends of white. I started out by measuring out the warp on the warping chairs.

francorios (not verified)

 

 

*continued from previous message*

 

These are my warping chairs. I'm going to weave two towels on this warp, 28 inch long. That's 56 inch. Plus 18 inch loom waste. That's 71 inch per warp thread. The top chair posts are 18 inch apart. The tops of the chairs have been moved to 53 inches apart. Each time I go around the four posts, I have enough yarn for 2 warps. 12 times for the colors, 52 times for the white.

(sorry for the fuzzy pictures) Here I have cut the warp at the corner post and I have all my warps cut to the right size.


Then I hang the warps on a hook on the wall. The way I warp is probably more labor intensive than others, but it works for me.


I am working from the back of the loom toward the front. I take a warp off the wall, loop it over the back loom bar, dip the cut ends into the glass of water, make a point on the end of the yarn and thread through the hole and slot in the rigid heddle, working from the middle to the outside.


Here it is all threaded up. There is an 8 thread white border each side, 12 threads of color each side and all white inside. The weft will be all white. It takes about about three hours from beginning to this point. Save until tomorrow.

 
Tell us what you plan to do and start warping!

 

sandeleh (not verified)

Hi, Franco

I have to agree with you - your method of warping is quite labor intensive.   I'm really wondering why you cut your warp apart when you take it off the chairs -  you have a continuous warp that you could easily thread front-to back and wind on to get nice tension. 

I used to have an Ericka and I really liked the "breast beams" on it, but I sold it cuz I hated the tiny round holes in the heddle.  I like the oblongs in my Ashford heddle much better.  I still use a hook to sley the heddle/reed, but I've gotten pretty fast at it.  I can get a warp on my loom, wound and threaded and tied on in front in about 45 mins.  It takes me slightly over an hour to wind the warp (5 yds) on my reel, but at the end of that time I have a warp with 2 crosses tied and choked for easy beaming. 

Anyway, I will probably use my prior method of winding my warp and beaming it and threading my loom - merely cuz I'm used to it and have done it so many times before.  Are you interested in photos of my progress or just of the finished towels?  I'm really new at weavolution - came over here cuz of your announcement on the Yahoo weaving group.

Sande in Fresno, CA, USA

francorios (not verified)

Hi Sande,
 
Thank you for joining the WAL.
 
My reason for warping the way I do. I tried another method and I found that after I put the warp through all the slots, I still had to cut and thread every other end through the holes.
 
With the short warp for this project, I found this method works for getting the yarn on the loom without needing any other clamps or reels. For a beginner project, I was trying to limit the tools required. So far we only need the loom stuff, measuring tape, scissors and yarn. We'll need the craft needle later.
 
I'm worried that some people may not have chairs that can be used for warping pegs. If someone has a challenge, let us know and we'll see if we can figure it out in the group.
 
Please feel free to post progress photos. We can share our designs and cheer each other on.
 
Thank you again!
Have a good day!
Franco Rios

PattyAnne (not verified)

Hey Franco,

I warp a little differently BUT I think it is great that you're giving us an option. Sometimes I think learning the longer way to do something makes the whole process a bit more understandable when beginning.  Then, after getting several projects done (feeling SUCCESS!)  you can go on to other warping methods.

One of the things that I REALLY appreciate about you and your website is how you just get in there in do it.... you improvise and make do, have fun AND make some gorgeous creations!  It's great to 'think outside the box' and figure ways to use common items (chair legs) to get a job done!

Keep the ideas flowing!

PattyAnne
PS. I'll be warping my cloths tonight!

francorios (not verified)

Hi PattyAnne,
 
Thank you for joining the WAL,
 
I hope that people will get in there and just do it. That part is the most fun. I've beat myself up plenty over doing it the "right" way and often did not do it at all. It's called "Paralysis by Analysis" and I'm try to recover from it.
 
So if you have any questions or suggestions, feel free to toss them over.
 
Thank you again!
Have a good day!
Franco Rios

 

 

Ariaya (not verified)

Well I'm going to just get in there and do it :)  Maybe not tonight though ... I'm not sure what time I'll get home so that'll make the difference :)  I'm aiming for white/offwhite with blue stripes ... it'll go perfectly for my grandmother's house if they come out okay.

 

francorios (not verified)

Hello Ariaya,

Thank you for joining the WAL. This will be ongoing over the next few days. So jump in when you can. Blue and white is always a good combination.

Thank you again!

Have a good day!

sandeleh (not verified)

I'm worried that some people may not have chairs that can be used for warping pegs. If someone has a challenge, let us know and we'll see if we can figure it out in the group.

 
That would be me!  LOL - see, there was a reason I bought the warping reel - I have no chairs other than one recliner and one adjustable office chair.  Neither has knobs on the top of the back or legs that I could use to wind warp on.  No table here to use a peg with, either, so I guess I'm stuck with the warping reel.
 
I went by Joann's today, too and scored a 14oz ball of beautiful varigated with turquoise and purple and white.  No pix yet, and I still have a scarf on the RH loom that needs to be woven off before I can wind on my cotton warp and start on my towels.
 
Thanks for the welcome and I will be a good girl and not get too uppity. :)
 
Sande in Fresno, CA, USA
 
 

Caroline (not verified)

I have warping posts that I clamp to a flat surface, but have similar space problems to you Sande. My last warp was done on top of my clothes dryer, as it was the most level space free at the time, and longer than my kitchen table. NO PICCIES!!!!!!!!!!! Thats one bit of DIY I keep to myself, lol! Just as well I don't do many long warps, hehe!

francorios (not verified)


Next, I laid out the warped loom on the floor. I open up some brown paper grocery sacks and cut them up so I can use them to wrap around the warp as I roll the warp onto the loom. As the warp goes around the loom bar, having paper to separate each layer helps the warp stay on the same level, allowing for even tension on the warp. Without a separator, the warp can be high and low on the loom bar, allowing for uneven tension.

So I comb out the warps with my fingers to be sure there are no tangles before I roll the warp onto the loom bar.


In order to get some resistance, I tied the warps to a weight (the bar stool) so the warp has something to pull against while I roll the warp onto the loom bar. I am warping on the floor this time. I usually enlist the aid of a boy to assist me while warping on the kitchen table. I can usually find one of my sons in the kitchen or on the computer, but I'm trying to do this solo as to explore possible solutions to problems.

This worked okay. In the past I've tied soup cans to the warps bunches and hung the warps over the edge of table. That was okay, but not great. If I find a great way to get resistance on the warps by myself, I'll post it. Spent over an hour playing with the paper and rolling the warp. Call it a day.

After a few days not weaving, I jumped back to the loom and started off. I forgot to take pictures of how I did the tie up on the loom. So here is the front loom bar. Notice the big loops?! That will come back to bite me later at the other end of the warp. Because I came up short a few inches on the other end! Because I used so much warp here on the tie up I ran out of yarn on the other end of the warp. So remember to wind your warp up as high as you can with as little knots on this end as you can.

 

francorios (not verified)

I wound the warp on as tight as I could to the warp beam (the far one). Then I tightened the knobs on the cloth beam (the near one). Then I tightened up the warp beam again. There was a little bit more slack in the warp beam then on the cloth beam.

I use shoelace knots when tying onto the cloth beam so I can untie and re tie as needed. Its very important to get the warp as evenly tight as you can. Uneven tension leads to uneven weft rows and wobbly selvedges on the sides.

Especially important is the outside inch or two on each side of your work. So be sure that your warp stays straight on the warp beam and that each warp layer is firmly on top of the layer below it under the paper. If the warp spreads out, the top layer has no layer below to support it and it falls down, creating loose warp on the outside warps.

So take some time to work on good tension, getting it evenly across the whole width.

Have a good day!

PattyAnne (not verified)

Hmmm.... I'll have the give the 'tensioning stool' a try!! 

 I think that I had the problem you spoke of Franco.  My outside warp threads kept falling off the paper because my paper was a tad too narrow.  I didn't think it would matter, BUT,  as I wove, I noticed that  my selvages were really weirdly loose and I couldn't figure out why.  I BET it was because of those loose outer warp threads.

Here's a picture (not my dish towels but rather something I had tried earlier).  Do you think that is what happened - the outside warp threads fell off the paper?  Would that cause the center part of the weaving to be fine and the outer edges to be messed up like this?

francorios (not verified)

Hi PattyAnne,

I get that same thing on my dish towels too. The inside warps seem to migrate closer together. The outer warps look looser. When I put the cotton towels in the wash dry cycle, it evens out a lot.

But I wonder if the spacing of the heddle is just too far apart for the yarn?

I usually use an 8 dent heddle. I have a 10 dent that I want to use next to see if the spacing is the issue. I know that even though my project is warped for 16 inch, it wants to narrow in to 15 1/2 inch or even 15 inch. I try to keep it at 15 1/2 consistent so at least it is an even width all the way.

Tomorrow I'll post "weaving in progress pictures"

Have a good day!

bolivian warmi

Hi I am watching here from the side lines. Djfiberarts mentioned having read that having loose selvedge threads is quite normal and that it's a good idea to just tie those on a bit tighter than the rest of the warps when you start. She wrote it here...........

www.weavolution.com/node/5320

Now you know that it is normal and it is not just you!

Laverne-the armchair rigid heddler!

Caroline (not verified)

Another trick is to have a selection of old film cartridge cases, or pill bottles and use those to weight down any wayward warps. You can add nuts and bolts, or fishing weights inside them too.

And for those who do not have a handy stool when trying to keep their warp under tension, a bottle of water, tin of peas etc will do - I have a moggy who loves swinging on chains of warps, lol!

quejimenez (not verified)

hello everyone!

i'm very new to the group (just joined) and equally new to weaving.

i'd love to join this WAL but i may be a little slower to begin and will have to play catch-up next week. i just ordered my loom and yarn and will be waiting for it to come...hopefully friday but no later than monday.

i will be working on a kronski 32" harp...i have coming with it : an extra 10-dent reed (for doubling up), a 12-dent reed, an extra pickup stick...textures and patterns book and a ton of yarn.

i'm not sure if the yarn i bought was correct, but if i need to (and if possible) i can go to jo'ann or michaels to find the appropiate yarn...i've got a bunch of 8/4, 8/2 and some 20/2 (i think) cottom coming.

i'm really excited to join this community, i'm completely new to working with fiber arts...extremely new.

as soon as i get materials..i'll get to work and post progress...i hope that is okay.

have a wonderful day!

btw, franco i'm swooning over what you have going so far!

djfiberarts (not verified)

I think I like this warping method better than the warping peg I've been using. Going to try it next time.

DJ

francorios (not verified)

Hello Jimenez,

Thank you for joining the WAL.

All the info will be here ready for you when you get your loom and yarn. So just jump in when you can.

Thank you again!

Have a good day!

Franco Rios

PattyAnne (not verified)

Hi Franco,

I got my loom warped using Peaches and Creme cotton.  I used the off-white color for the majority of the warp.  The pink is a Peaches and Creme color called Strawberry Cream.  YUM-OH.

 

I have a question. See that lumpy bumpy part near the cloth beam (I think that's what the beam in the lower portion of the picture is called).... anyway... is it OK that it is so lumpy/bumpy from the tie on knots?

 

My DishCloth WAL in progress on 20"Flip Loom

francorios (not verified)

I like that color! It's amazing how the color can add such 'pop' to a plain white towel.

The lumps are survivable. When you wash the towel it will even out. I put a cardboard tube from paper towels over the lumps to smooth it out. I have a picture at home I will upload when I get home tonight.

Your towel looks great!

Thanks for putting that picture up. Are you weaving while watching TV?

Have a good day!

PattyAnne (not verified)

Yep! I sure am weaving while watching! :)

francorios (not verified)

Good for you!

One of my self imposed rules is that when I find myself watching TV and my hands are empty, I force myself to go warp something so I can start weaving. Trying to eliminate wasted time.

Have a good day!

Caroline (not verified)

PattyAnne that looks great!

Well done!

We all have knots where we tie on. I like to tie-on every half inch or so, but thats just me, and I probably make far too much work for myself. It also depends on how thick the yarn is, the sett, etc. I think it gives me a more even all-over tension, but I am using a finer thread than the Peaches nCream, and my knot tying skills are not the greatest.

You will develop your own set of skills based on what you learn from books and other people, and what you work out by trial and error yourself. Thats why these WALS are sooo good, because everyone is experiencing something similar so its very easy to get help or learn new techniques. And when anyone does have a problem, we all learn from it when the solution is found.

I'm not actually doing the WAL - I'm here to lend support and cheer from the sidelines, and learn any new tricks I have overlooked in the past. I learned to weave in isolation, from books, so I probably have lots of very bad habits, hehe!

francorios (not verified)

Well, I can't post new pictures right now. The little device for moving pics from the memory card to the computer is missing. I will have to questions the boys when they get back from their youth group meeting tonight.

So I'll have to post "new" pics later tonight or tomorrow.

Here's a picture of my bar stools being used a warping pegs for a backstrap project.

Since I tension the threads on the loom, this method would also work for the rigid heddle.

 

Have a good day!

francorios (not verified)

PattyAnne,

I forgot to mention how nicely space your warps are. What is the sett of your loom?

Have a good day!

francorios (not verified)

More weaving info from my blog:

Notice how cool the warp stripes look? All the really hard work is done. What I need to do now is focus on technique because the simple things need to be done as near perfect as possible.



Here is a picture of the two towels in progress. Notice the two seperators? Those are pieces of cardboard about one inch wide. That separates the towels so I have some room for hand hemming and some fringe. When I weave, I get into a pattern of "heddle up for weft on left, heddle down for weft on right" so when I use two separators, the pattern stays the same. Using one separator changes the pattern and then I have to change my rhythm and then I get mixed up and get mad and then I want to punch a water buffalo.

Anyway, I also use a measuring tape to keep track of how much I've woven. I prefer to loosen the warp before I measure so I get more of a "slack" measure. The paper measuring was picked up for free at IKEA, so when you are at IKEA, pickup a couple. They're FREE!

I mark the measurment by tying a piece of yarn to the side of the woven piece.


Here I am at the end of the warp. You can see how I'm right against the heddle and the far loom bar. I'm trying to push through as many throws as I can before I can't put any more.

Here my heddle is in a DOWN position (weft on the right) and is held down by the heddle block. The heddle block is the U shaped piece of wood on the loom. When in the UP position the bottom wood piece sits on top of the heddle block. The slot in the middle of the heddle block is the Neutral position and is good place to park the heddle for warping up.

This heddle block is cracked and I'll need to make a replacement for it.



Close up of the measuring tape and the marker yarn tied to the side.

more to follow:

francorios (not verified)

HEMSTITCHING FROM MY BLOG!



I'm hand hemming the ends with a fringe. I hem it on the loom because it is easier that way.

Here is a video that showed me how to hemstitch with the fringe.


hemstitch video
http://www.youtube.com/watch?v=NHBKqG2Do2I



Here is the almost finished towels. They still have to go through the washer and dryer to finish and shrink some.

PattyAnne (not verified)

Caroline,

I think you've solved my problem!

You tie on every half inch or so with FINE thread.  I tied on every....oh... 1 1/2 inces with the Peaches and Creme.  I figure my knots were just way too bulky.

Next time I will adjust the number of knots I tie thereby making each knot bump smaller!!

Thanks!

PattyAnne

Caroline (not verified)

Way to go Franco! Like your LH selvedges. Apparently there is always one side, that no matter how we concentrate on it, is difficult to get neat. I wonder if the secret is to ignore it and try and get into a regular beat? Anyone know?

sandeleh (not verified)

PattyAnne -  there is an easy fix for the lumps on your cloth beam from tying on.  Put a dowel slightly larger than the knots on the beam when you first wind on and it will smooth out the cloth beam for you.   If you have the kind of warp that needs to be tied onto the back apron rod (rather than having the rod slipped thru loops) you can do the same thing there.  Some larger looms have cutouts for the knots to lie in so you dont get those bumps in the cloth.

I have not found cardboard rolls from paper towels to be strong enough to withstand the tension of the cloth winding on.  I find mailing tubes to be quite a bit stronger and easy enough to cut using a serrated knife.  I guess PVC pipe is best for that sort of thing, but there are ways to minimize the size of your tie-on knots.

here is Peggy Osterkamp's tip of the month on lacing on.  http://www.weaving.cc/leasesticks/maytip.html   Say you tie an overhand knot in every 4 ends from the front of your warp, then lace the knots onto your front apron rod.  The knots will be small (only 4 ends) and they will flow across the whole front of your warp - making a very even layer of bumps.  Lace them on to your rod, then as you wind on and take the first turn around the beam, lay in another dowel that will let your cloth (or heading) roll right over the lumps of the knots. 

If you have time, read thru Peggy's tips.  They are worth their weight in gold and while you may not use all of them now on your RH loom, they will come in more than handy when you move up to a multi-shaft loom.  :)

Sande in Fresno, CA

francorios (not verified)

This is one of my first warp stripe towels, made with a color called "Gumdrop" from Peaches & Creme.

Goto my blog to see bigger pics you can click to zoom in

http://francosfiberadventure.blogspot.com/2009/05/gumdrop-towels.html

 

http://rabbitgeek.com/loom/0420towel2med.jpg

 

This is another made by varying the warp stripes and using the same colored yarn as weft, alternating two of color, two of white. I think the color is P&C Shades Of Spring. It gives a kind of accidental plaid pattern.

francosfiberadventure.blogspot.com/2009/05/look-back-to-my-first-dishtowel.html

Take a variegated yarn like this P&C Shaded Denim and use it for warp and weft! More accidental patterns occur. I'm told this effect is called "pooling" and the effect can vary from piece to piece. I can buy cones of variegated cotton yarn from walmart (limted selection) or directly from P&C or Sugar and Cream for practically unlimited selection. These cones can be the source of very color infused towels like this, or the stripes can be used to pep up the white yarn base color.

Have a good day!

PattyAnne (not verified)

Those are beautiful!!  I really wish I could zoom in on them!

I have a question.  Have you already hemstitched between the two towels or do you do that after cutting them apart?

Thanks,

PattyAnne

francorios (not verified)

Hi Sande,

What brand of yarn did you buy at Joann's? I never seem to find any interesting cotton worsted in 14 oz size there.

Have a good day!

francorios (not verified)

Thank you.

I put some links to a couple of the pics and the one in the middle I made bigger. I learned it is easiest to hemstitch on the loom before cutting it off.

I'm also learning that you should cut them apart before finish (wash/dry) or the long cloth can end up being tied around the washer agitator. Which is very agitating.

Have a good day!

PattyAnne (not verified)

I need to make sure I hemstitch while ON the loom next time for sure.

It is funny how each step helps me discover what NOT to do.... or to put it positively... I'm learning what TO do next time.

I am enjoying this WAL.  Thanks, Franco!

francorios (not verified)

I'm glad you are enjoying this WAL.

I'm also glad I took pictures and uploaded to my blog before I started this week. Me and the boys are going to have another talk about THEIR stuff and PAPA'S stuff.

Have a good day!

 

 

francorios (not verified)

 

Go here for big image

 

Another version of the Shades of Spring towel. I used white cotton yarn warped on half the loom. I used variegated color yarn warped on the other half. Then as I wove, I started with 32 rows of white yarn for weft, then switched to 32 rows of color, then 32 rows of white, etc. Made a nice pattern without a lot of math.

ETA: The warping was like 32 color, 8 white, 4 color (3 times), 32 white

Have a good day!

sandeleh (not verified)

Franco, Your towels are lovely!  I really like the effect of using the variegated yarns for both warp and weft - makes a very nice accidental plaid design.  :)   

I'm still weaving off the scarf already on my loom, but today I went looking for more dowels (my preferred warp packing item) only to discover that the hardware stores like OSH and Home Depot only carry soft pine dowels that are crookeder than a rabbit's hind leg.   So off I go to WalMart, where I can recall buying the dowels I cut down to 12" back in 2000 (but I need 18" pieces for my 17" towel warps).   Seems that WalMart has re-configured their crafts area and all their dowels are in 12" pieces in packages.  *sigh*  OK, I try Michael's.  They do have some dowels in the 36" lengths and about 18 straight ones that I bought and thought bad things about after I got them home.

The dowels all had splinters and I had to search for my sand paper pack and smooth them out.  sheesh.  then a quick wipe and a going-over with Howard's Feed and Wax. I'll let that sink in while I finish the scarf on the loom.  I'm kinda still thinking about what exactly I want to weave.  I have some really pretty christmas cotton that I bought a couple of years ago - it's Handicrafter and mostly spotted, I think.  Then I found a couple of cones of Xmas blend back in the studio.  I have boxes of smaller balls of the cotton - I could weave on that stuff for ages!  Anyway, I just looked at the time.  Sheesh.  I probably wont finish the scarf tonight, but I dont think I'll have to be out all day tomorrow running errands either. I will finish it and get my new warp wound. 

Sande in Fresno, CA

francorios (not verified)

Hi Sande,

Wow you had a rough time at the hardware store. Glad you found some dowels you can use. Seems like all the dowels, hardwood or not, need to be sanded for use with yarn. I think it's called "mill finish." The mills just are not thinking of weavers and spinners when they make these dowels. Someone should tell them!

Is your handicrafter yarn white and spotted red/green? I had some before and the red dye ran when I wet finished it, turning the white part to pink.

When I complained to Bernat, they send a nice letter telling me I should always put their yarns through two washes to set the color on their "colorfast" yarn. Look closely at the yarn and if you see "chunks" of dye sticking to the yarn, you should prewash it. Let me know and I'll email you a copy of the letter.

It took me three washes with "dye catcher" sheets to get the pink down to a tolerable level for use as kitchen towels.

Do you have any problems with their yarn?

Have a good day!

francorios (not verified)

Hi PattyAnne,

Your progress photo looked great and I wanted to know what sett is your heddle? 10 or 12 per inch?

The warp spacing is very close, which looks good, and the edges are very good.

Have a good day!

bolivian warmi

I really like the effect you got in this. Writing down all these yarn names for when I go to the US.

francorios (not verified)

Sande,

Thanks for those tips on dealing with the knots! I have problems with the knots also, it usually minimizes with the paper towel tubes. I like the idea of using a dowel, since I have a little collection of dowels building up from my backstrap and frame weaving projects.

Thanks for the link to Peggy's web page. Those are good ideas there.

Have a good day!

francorios (not verified)

 

 

The variegated yarn seems to be sold for the knitting craft, but it takes on a different effect when used as woven. Here is a little scarf I did with solid color warp and variegated warp on a frame loom. I can get a lot of variegated acrylic and wool yarns at the yarn and craft stores. More details about the above scarf on my blog.

http://francosfiberadventure.blogspot.com/2009/05/finished-woven-scarf.html

If you get to a Michael's or Jo-Anns in USA you can usually find a lot of variegated cotton yarns in 1.75 ounce (oz) balls. Walmart usually has 14 oz cones of white and 14 oz cones of two or three different variegated yarns. Then they will have a dozen or so in 1.75 oz balls.

Have a good day!

 

quejimenez (not verified)

 Thanks for the warm welcome! I'm anxiously waiting! and enjoying watching everyone's progress...and trying to make sense of all the weaving lingo!

by the way...what a slip...i forgot to include my name...lol

have a great day also!

kiandra or "ki" for short

=)

quejimenez (not verified)

 this is looking beautiful! i'm so excited to get started working on some towels...the pop of color does add a lot of interest....i too plan to be weaving and watching t.v. instead of my current hobby of watching t.v. and falling asleep at the end of a long homeschooling day!

great job!

-kiandra

Submitted by Anonymous (not verified) on