I have some wonderful black and white fingering weight yarn. There is a very simple houndstooth pattern for a 2-shaft loom in Liz Gipson's Weaving Made Easy that I would like to use with it. On the warp you thread 2 of black, 2 of white, 2 black etc. ending with black. The weft is 2 of black, 2 of white etc.  There are 54 warp ends.

But the pattern is for worsted weight yarn. It occurred to me - an inxeperienced weaver - that the pattern might not show very well with the thinner yarn. How can I scale it to fit the fingering weight yarn so that the houndstooth pattern shows?

 

 

Comments

Sara von Tresckow

 True houndstooth is "color and weave" and scales automatically to the size of the yarn used. Thin yarn, small checks. 

You could double or triple your thin yarn or make "regular" checks.

 

jeannine (not verified)

I guess you multiply the number  by the same ratio : 2*3=6 white,6black ......

                                                                                              54 /6=9 blocks of black and white

try drawing on paper to be sure;the look of bigger blocks is ofcourse a little different.therefore I agree you could perhaps double the yarn.

hope i could help and i  think other more expirienced will try to help you with this

jeannine

 

thegnu (not verified)

Excuse my ignorance, but what does "color and weave" mean?

Sara von Tresckow

 Color and weave means that you get the pattern effect from changing color of your threads, not by "structure".

Since plain weave is only a 2 thread repeat, you can't have more than 2 threads in a check.

With a 4-shaft twill, you can have 4 threads in warp and weft for each check - once the weft sequence repeats, the color must change or you get a different look. An 8 or 16 shaft twill would have corrrespondingly  more threads.

 

thegnu (not verified)

That diagram is a great help, Jeannine. Do you have a computer program to do that?

 

 

thegnu (not verified)

Thanks, Sara. I can see that before long I'm going to want at least 4 shafts.

By the way,  I think it was you who I noticed writing about the Öxabäck loom. My maternal grandmother was born in Öxabäck in 1885 so it seems fitting I should someday have such a loom. But at present I couldn't afford anything near that! Thanks for your help. Slowly I'm catching on to this wonderful craft.

ingamarie

One thing about adding threads to each color block-- if you have 2 threads of light and dark alternating you'll end up with a slight pinwheel effect, with more threads you will get more of a checked pattern. You can see that clearly in Jeaninne's diagram.

I designed a color and weave gamp for my guild, I put the draft of it up on W'lution here: http://www.weavolution.com/node/6063

I can also send you a pdf of it it you like.. just pm me with an email address!

marie

thegnu (not verified)

Wow!Marie, that's really interesting. I'd love a .pdf of that so I can print it out and study it. I've only just started learning how to read a draft. I'm fascinated by the mathematics of it all, as well as the beauty of the designs. I think I'll learn a lot studying this.

What is a gamp?  I'm sorry to bombard you with questions. I've gone way beyond my simple houndstooth - at least in my head.....But it's more fun to learn from y'all than from books.

Ann     [email protected]

PS I just went to your profile page and discovered not only that you are Swedish (My mother's family is Swedish and my father's is Norwegian) but you live in Austin (I live in Elgin, which is a hotbed of Swedes, oddly enough). And I have a PhD from Berkeley. Mine is in geography, but I knew a lot of the landscape architecture people then (early 70s). I wonder what else we have in common.....

 

ingamarie

A 'gamp' is when you put one set of weaving parameters (color, threading) in the warp and then repeat it in the weft to see the different interactions.

I just put the gamp up as a project here: http://www.weavolution.com/node/8728  so you can see how it works.

I'll email you a pdf, it's pretty small though hard to read :)

marie

ingamarie

Waitaminnit... I just read the rest of your post. You're in Elgin?  And just WHY aren't you in our guild?  I know all about the Swedes out there, it's pretty amazing the colony of  Swexians as they call 'em. I was at Berkeley in the late 70's and yup, did some geography soon.

 

marie

jeannine (not verified)

I have used Weavedesign .you can find the link below.I can not afford expencieve software but weavedesign can help a lot to visualise a weaving and works a lot faster than drawing on paper .

www.pikespeakweavers.org/html/ppwg_weavedsn.htm  

(i have no attachment to pikespeakweavers,just found it on the net)

If you are working with windows there is also winweave but I don't use that a lot.there are more good programs around but this is a good start i think.

I hope this helps you  on the way to more weavingfun .

jeannine

Submitted by Anonymous (not verified) on