Will be purchasing a new SS reed soon.....It's either a 10 or 12 dent....any feedback on this subject...what would be the best all-around?

Comments

laurafry

Depends...which yarns will you be using? How many epi? I have reeds from 4 through to 20, but most commonly use the 8, 10 and 12 for weaving Cheers Laura

jlread (not verified)

Thread sizes most likely....8/2...6/2 and possibly 10/2

laurafry

With an 8 you can do 4, 8 12, 16, 24, 32 epi without too much difficulty

With a 10 you can do 5, 10, 15, 20, 30, 40

With a 12 you can do 4, 6, 12, 18, 24, 36, 48

By using a 'compound' sleying you can do even more.

cheers,

Laura

jlread (not verified)

Just for arguments sake.....if you could have only 1...which one would you choose.....FYI...this is going to be a 50" reed...Thanks

ReedGuy

I use mostly an 8 myself  with 10/2, 10/3, 8/2, 16/2 cotton and wool yarns of 900-2000 ypp grist. I also have a 4 and a 16. I have woven as dense at 64 epi.

 

I used 10/2 at 28 epi (3/4/3/4....)in a block weave with tabby ground cloth. Same yarn for overshot worked out to 16 epi (2/2.....)to get it square, also a tabby ground cloth. Both 8 dent reed. Now onto a doubelweave blanket in wool with the 8 dent (3/3....) for a final 12 epi cloth when unfolded off the loom.

Yvonne K

I find my 12 dpi reed is the one I use most often. I also use a 15dpi reed for finer threads ( great for 30 epi ). I think you really do need two, if I think about it. I can't imagine doing without either of these reeds.

laurafry

It depends on which one will be most useful to you. Recently I have been using an 8 on my big loom, a 10 on my small loom. But that changes depending on the yarns I am using and epi. For instance, sometimes I will use 2/16 cotton at 32 epi, so I use the 8 dent reed. Other times I might use the same yarn at 30 epi, so I use the 10 dent. At 36 epi, the 12. I would say to buy one now, get comfortable with weaving, then buy a second reed in the future. Over the years I have accumulated a large number of reeds of various dents and lengths. Every time I bought a second hand loom, if it came with several reeds I would keep the extra reeds when I sold the loom. :) Having more than one reed is like having a bicycle with more than one gear. ;) Cheers Laura

jlread (not verified)

I already have lots of reeds...but they are all under 40"....I need to get an all purpose reed at 50".....hence my query about a DPI that would be the best for general weaving...I most likely would be using 6/2 and 8/2 threads and for the moment, it will be only 1.....either a 10 or 12....

laurafry

Will you always be weaving the full 50" width? If you aren't then any of the shorter ones will do so long as it is wider than your warp. Only you can decide which reed is the 'best' for your purposes. Leclerc looms come with 12 as their standard. Other makes come with 10. Cheers Laura

jlread (not verified)

No....I have a plan to weave a throw....I need a wider reed.

ReedGuy

Doubleweave it, unfold off the loom. ;)

jlread (not verified)

Want to use an 8 shaft.....4 block...twill/overshot type weave and am not sure I would care to experiment with doubleweave....

ReedGuy

A shawl I suppose doesn't make much difference if you had the 50" reed. The width across the shoulders is actually the length of the warp. And the drape the width. But if you want a blanket on the same reed, you'd either be sewing panels or doing doubleweave. 50" wouldn't cover a twin size once it shrunk up in the wash. ;)

jlread (not verified)

I want to weave a sofa throw......I have decided on a 12 dent reed....

ReedGuy

Depending on what fibre your gonna use, you could have 20 % or 30 % shrinkage including draw in. I have woven 58" in the reed for wool throws.

Queezle

Like others, my reed collection is mostly composed of those that came with my 2 used looms.  However, I eventually wanted to add a 15-dent reed to my collection (20 yrs ago?).  For some reason, the reed I purchased doesn't fit down into the slot on beater (of either my mighty wolf or schacht floor loom).  I've used it, its just raised up higher, but its awkward, I wondered if I had made a mistake ordering it.  This was before the age of the internet, and so information was slower in coming.  But the question remains -- are reeds not standard thickness?  Is this something one needs to be concerned about?

Submitted by Anonymous (not verified) on