Does anyone know the weave structure behind the cover photo (see attached) for Mastering Weave Structures by Sharon Alderman? The caption says it was done using only 4 shafts, two of which were for plain weave, but I'm not quite sure how to create the navy and white pattern in the fabric.

Also, I wanted to use this pattern to make a tie and am wondering if I can switch the plain weave to satin. I'd appreciate more experienced weavers' thoughts on how to accomplish this.

Thanks!

Comments

mpetrini (not verified)

Look on page 128, and the supplementary warp material on page 129. It would probably be helpful to read the entire chapter on compound weaves.

You could change the plain weave background to a satin, but a true satin requires a minimum of 5 shafts, plus 2 more for the supplementary warp, for a total of 7; you could use a false satin with 4 shafts, but you would still need 2 more for the supplementary warp for a total of 6. If you have an 8-shaft loom, you are all set!

Marcy 

Submitted by be.wierd on