I thought I'd share a trick I learned as I was making a room size carpet. To maintain some order of control on the weft, I resorted to using umbrella swifts. If you like you can go to my website, and click on the big picture on the home page and it will show you the process I used.

It's a time saver, because you aren't tangled and it's easy to shuttle the weft without flips and turns of the fabric.

http://www.villageweaver.com

Comments

claudia (not verified)

So, after you decided on the colors of strips to use, you sewed each one together then placed them on the swift to keep them in order. What I am missing is what type of shuttle you used. Did you wind the strips from the swift to a shuttle? What sort of shuttle did you use?

Claudia

villageweaver (not verified)

I didn't specifically use it as a color order thing, although it helps. If i noticed i was using too many browns I could see it pretty clearly. I use the swift to control the entire length of the strip. If you use rag weft, you know it works better if you ball it, but it's also tedious and lots of work if you get it messed up. Using a swift controls this step greatly. 

I use a regular old rag shuttle, the big kind. Putting the weft skein back on a swift, adjusting it firmly to the proper width, and loaded my rag shuttle.

The weft on the swift needs to be VERY secure - i tightened the swift screw as tight as i could to prevent the skein from tumbling down.

 

Submitted by Anonymous (not verified) on