For beaming a warp--I have always used a reed but I'm working through Jason Collingwood's dvd on shaft switching and he advises a raddle placed on the back beam so it is closer to the warp beam.  He is pretty adament that the warp beam at 12" width and I guess he feels that it may spread(?) or narrow(?) if beamed with a reed (or raddle) further away in the beater.  But spreading the warp with a reed and beaming with it mounted in the beater never seemed to cause issues with any of my other weaving.   Anyone with any insight or is this a case of different tools for different weavers?

Comments

Joanne Hall

Hi Jamie,

There  is no need to change your warping techniques, since I know you are very successful with your warps.

Joanne

laurafry

Unless you are having issues I wouldn't worry about it. Cheers Laura

jmbennett (not verified)

Watched it again while beaming and his point is that you catch crossed threads.  But moving the cross to the behind the heddles lets me do that so all is good.  And learned what a 3-end block is.  Life is good.

Submitted by Anonymous (not verified) on