Hi there,
I 'inherited' an old weaving loom from Harrisville Designs. For the past 20 years or so it had been stored in a barn (so I was told). After cleaning and repairing it is almost ready to use, except that I'm not able to find fitting heddles. I measured the distance from the top of the heddle bar on the shaft/harness to the bottom of the bottom bar and that seems to be 10.25 inch. Can anyone give me any advise on how to replace the heddles I have now - they are too rusty to use.

The number on the weaving loom is A 74281 ?

Thanks in advance!

Comments

SallyE (not verified)

I'm guessing the 10.5 inch heddles will fit just fine.  The top and bottom "eyes" on the heddles are actually about 50% longer than they need to be for the heddle bar itself, giving some wiggle room.  If you know someone you can borrow a heddle from, you could try one first.

I think heddles have been coming in standard sizes for a long time now, so I doubt you loom was made for some odd size.

common_thread

I recently acquired an eight-harness floor loom that has no make, model or number anywhere on it. After figuring out how to assemble the whole thing, I've come to find that the heddles that came with it do not fit properly. In hindsight, I recall the person I got the loom from saying something about this. The measurement from the top of the upper heddle support to the bottom of the lower support is 10 1/8". The space between the heddle supports is 9 3/8" whereas the distance between the two eyes on the heddles is 9 1/2". This missing 1/8" causes the heddles to either sit at an angle or bend. The heddles are flat metal heddles and they measure 11" total length. I've looked at lots of websites and different types of heddles, but none give this measurement, and I do not want to waste money buying something that will not work. Any help or advice?

sequel (not verified)

Are your heddles the "old" kind with small openings for the heddle bars?  Maybe the newer ones with larger heddle bar openings will help.  If you could post a photo, you may find an identity for your loom.  Halcyon Yarn used to have a pretty good description of various heddle sizes.  Hopefully you won't need to tie string heddles...

Aurian

As SallyE suggested I ordered the 10.5 heddles and they fit perfectly. I'm almost finnished with my first project ... so thanks for your advice! :-)

Submitted by Aurian on