Hi, I'm a relatively new weaver but recently got a Norwood 8-harness loom w/ sectional warp beam....for free. I have no idea where to get parts or information on how to use/take care of it. Any advice? I would like to find a tension box and other products for it made by Norwood if possible, but they seem to have stopped producing equipment and I have found very little elsewhere online! Getting frustrated with fruitless web research.

 

Zelda

Comments

heatherbarrick (not verified)

is your loom up and running? many tension boxes can be adjusted to work with multiple looms. i have a norwood with sectional beam but rarely use the sectional beaming tools that came with it...i usually do not warp more than 6 or 7 yards at a time personally, because i find im ready for something new by about then. if your loom is in good shape and ready to weave i would advise warping a few different ways to find out which method you like best and what you like to weave most.then you can decide which tools will be the best investment for you. happy weaving! 

r1mein54 (not verified)

Congrats, lucky you (shaft envy) - and no one can beat the price!!!

gailc

Do you have a norwood cherry loom? If so, it was made in Michigan before 1996. In 1996, the company was sold to Toika or maybe to WEBS who worked with Toika to produce the Norwood looms using birch. I dont think Toika still makes the Norwood line, but you could probably get more information from WEBS.

Dena (not verified)

Webs was the last manufacturer of Norwood looms.  My understanding is that they don't make them anymore, but it's worth a call to see if they know about parts.  Talk to Barbara Elkins 1-800-for-webs.

zeldablair

Thank you all. V impressed by great fast responses. Awesome forum

debmcclintock

Boy, with the $$ you saved you should get the AVL warping reel and skip the tension box route. Go to avl's website to see a warping wheel and their video on how to use one.

JanWilliams

I have a 40" Norwood loom that is (new) to me and have a couple of  questions. 

1.  It came with a sectional beam. Was a regular beam made for this loom? If not, could a regular beam be created to replace the sectional beam for short projects?

2. Can the loom be warped without a tension box (if I'm using the sectional beam)?

i know this thread was from several years ago, but I hope someone can help me, so I can begin using this loom.  As you can probably tell, I'm a novice weaver. 

Thanks, Jan

 

 

 

 

loomroomcat (not verified)

I never use a tension box when I sectional warp.  I get an occasional loose thread but I just hang a weight on that thread between the heddles and the back beam.  Problem solved.  I weave rugs and put on long warps.

 

JanWilliams

So you warp as if the sectional beam was like any regular beam?  That would solve my issue!  Thanks so much for your response. 

Kchidde

I had a Norwood for close to 20 years. It had a sectional beam but I just used it like a regular warp beam. I ended up taking the pegs out since I never sectional warped. It's actually nice that way for smaller projects because the beam is bigger around.

 

feliced23

I just got a 50'' cherry wood Norwood Loom, but it needs a crank. I haven't been able to find one. Can I substitute one from another loom? I tried calling WEBS but they couldn't help.

Carole M Cole

Norwood did sell sometime in the past decades (??), yes and then Webs ended up with it and it ceased to be. I don't understand why anyone would buy a loom company and then let it become obsolete. HOWEVER, the Norwood kids and grandkids have revived the old business and woodshop and are warming up the loom business again. I'm going to have them build a new beater for my Zeek (Norwood clone) loom. Someone discarded the loom and by the time I got my hands on it, the beater was gone. I've been told that the New Norwood builders can fix that.  They are just now getting a new website fired up and can be found on Facebook. Easily located with a websearch so I don't even need to give you a link. 

Submitted by zeldablair on