My grandmother, who was a master weaver, passed away recently, leaving me all of her looms (including a massive AVL one). Unfortunetly, she was not able to teach me how to use them before she passed. During my winter break, I wanted to take the time to get started. I have this small loom in my apartment, but need some help identifying it so that I can learn how to use it. I know it is a Norwood Loom, which was only made for a short time. Other than that, I have no idea, and am absolute beginner. Anyone who can identify the type of loom, and how I can learn how to use it, is greatly appreciated. Please ignore the messy house, we are still recovering from Xmas!

 

Comments

Joanne Hall

If you go to the website of the Handweavers Guild of America, they have a list of the weavers guilds for each state.  Find the closest guild and make contact with them.  A guild will help you to find local weaving classes and sometimes guild members will offer to help you.  They often have books and DVDs that you can borrow. 

It looks like you have a good loom to start with.  Good luck. 

Joanne

Huntermom

How to put together. ANY instructions on needed products and where to purchase

 

Joanne Hall

I thought that I should add a little about your loom.   All looms have the same basic parts and weaving on them is about the same.  You don't need to have a class or a book that is just for your loom.

Assuming that you have all the parts for your loom and that it is in good shape,  you can weave on the warp threads which are on the loom.  You might need a little help looking at the threading to be sure that every thread is in order and then you need to put the threads through the reed which is sitting on your beater.  Then you tie up and start weaving.  You just need someone there to give you a little confidence.  If you can't find someone to help you, you might find some books in your grandmothers collection or you can check the local library.  If you need to learn some vocabulary, you can find it here:

http://glimakrausa.com/glossary/

Joanne

sandra.eberhar…

You haven't said where you are located, but Gillmore in the West and Leclerc in the East still make similar jack looms, and Leclerc is a good source if you need parts (many loom manufacturers used Leclerc parts in their looms.)  The Leclerc website is also a good source of information, but I agree with Joanne that the Glimakra site has a lot of good basic information about how looms work and how to use them.  I beleive that the last company that sold Norwood looms was Webs.

Submitted by Manji on