I visited a knitting shop a few weeks ago and bought some beautiful yarn; I need help choosing the correct yarn for the warps.  First:  100% Superwash Merino Wool, 18 epi.  It says "7 st./in. on #2 US Needle" if that helps.  The second:  Handspun Pure Wool (from Uruguay), 6 epi.  It also says "14-18 sts = 4" / 10 cm, 8-10 US Needles."  I know the last part for both of these refers to knitting, but I'm wondering what kind of yarn would be suitable for the warp; both yarns will be used for scarves.  (The shop owner suggested cotton.)  I'm planning on using a rigid heddle for the Uruguay yarn, and hoping I can use my floor loom for the Merino wool.

Any suggestions would be greatly appreciated!

Monica

Comments

endorph

superwash merino on my rigid heddle for warp and weft. I ahve also used nature spun sport and worsted wweight in both warp and weft on my rigid heddle and Mighty wolf without any problems - Perhaps someone with more knowledge and experience can give more insight into this question.

loomroomcat (not verified)

I personally would not use cotton with wool as the two will not bond together and the weft will slide on the warp.  I would use wool, or a wool blend.  Sometimes alpaca is not strong enough for warp.  Mohair is too hairy.

ReedGuy

18-20 epi sounds fine on the Merino. I've used 16 epi with 24 st=4" on 3 mm needles. On the hand spun that is pretty heavy for a scarf. In twill it would work best at 8 epi.

The Merino will feel the nicest and not heavy. Beat lightly. If it's single ply it's going to be hard to work with, breakage.

 

Does the labeling give yardage and weight of the skein?

Monica Bellas (not verified)

The Merino says 1100 yds per approximately 8 ounce skein.  The yarn from Uruguay says 138 yards, 3.5 oz.

So I guess I need to get some more Merino for one scarf; any suggestions on a suitable wool for the heavier yarn from Uruguay?

Monica

ReedGuy

Your Uruguay yarn is heavier than I expected, so 6 epi should work fine. I'm guessing it's 3 ply. If you lived near me or in Canada I would use Briggs and Little 3 ply, now there are a number of grades or weights that could be easily matched by the lable. Your best bet might be something from Helcyan (spelling) possiby? :)

Submitted by Anonymous (not verified) on