Question--I'm using a table loom and working with 5/2 cotton warp and 3/2 cotton warp. I've woven a few feet of project but now a small (about 1 inch) section of the warp seems to have looser tension than the rest. The warp is quite long so I don't think that section has come untied from the back. Is there a way to "tighten" that section and continue?

Thanks!

Comments

Dawn McCarthy

If you are weaving several items, you can add a few sticks to pack that one inch section in the back - or make a loop of strong string around that section and weight it to the same tension as the rest of the warp.  It may be worth cutting off the first item and re-tieing the warp to the cloth beam.  If your warp is very long you may find that the poor tension continues throughout the warp.  Is the loose section in the middle or the outside edges?  Next time when making a long warp use sufficient warp sticks and paper.  I think it is Joanne Hall that has a great tip on her site for making paper selvedge "flanges" which help maintain good tension on the outer edges of the warp.  You may have to tinker with the weights and baby it along. Good luck

Dawn

Amelia Garripoli (not verified)

When I have one loose warp thread, or a small group of them, I hang an S hook off the warp behind the warp beam. A small one usually does the trick. The weight keeps it taut for weaving, and the S-hook usually slips along just fine when I advance the warp.

Submitted by Anonymous (not verified) on