Sitting in my kitchen (until I make room for it and wrangle it into my studio space) is a Harrisville Designs 36/8 loom, purchased from a friend who had it in their heated garage for some years... she never got around to using it, and according to her it had never been used when she acquired it second-hand, however long ago that was.  It certainly looks unused.

Hello Beautiful

So basically, it's a brand new loom... the harness action is still nice, quiet and smooth, and even the leather cords that raise the harnesses are in good shape.  There is some light rust on the heddle bars and on the reed (the reed is definitely older than the loom, and looks like it was used at some point) that I'll need to address with steel wool/emery paper, and there is the matter of mouse pee that will need to be cleaned from many surfaces.   My plan for that is to use a mild cleanser of some sort... maybe just vinegar, followed by Nature's Miracle (which works wonders for cleaning up after animals) and then some furniture polish.

I'll be ordering a copy of the manual for this model from Harrisville Designs so I can hopefully see how to do any necessary fine-tuning (a couple of the harnesses are hanging a bit lower than others and/or slightly crooked) but beyond that I was wondering if any of you have a checklist that you go over when evaluating or rehabbing a loom that's been neglected.

Thanks!

-Andy

Comments

Vicki Allen (not verified)

That looks like a beauty. You are very fortunate. I have heard that Murphy's Oil Soap is a good product to use.  I also recently read that Windex was a good product to use to clean the reeds. Happy Weaving and Happy New Year.

Vicki Allen

Joanne Hall

After a basic clean up, I would just put a warp on it, check the cord length on the tie-ups and start weaving.  If there is a problem, it will show up when you weave and then you can see what the problem is.  Have you woven before?  If you have questions about weaving, we have a weaving FAQ on our website.

www.glimakrausa.com

And check out my new book, Learning to Warp your Loom.

Joanne

steve104c (not verified)

I recently acquired a Harrisville Design 36" 4/6 loom. Send me your email and I will send some pictures and info. on refurbishing it. I can show and tell you how to align the harnesses and if the wheels that the cords go thru to lift the harnesses stick, I know what might be making them stick. I modified the the warp beam brake to work easier............Steve.
Submitted by Anonymous (not verified) on