I have a very cranky jumbo ball winder which I purchased 2nd hand many years ago.  It's performance has made me cranky enough that I want to replace it.  I have several of the small ubiquitous red and white ball winders but I need something larger for my rug yarn.  Does anyone have a recommendation for winding 1 -2 pounds of yarn into a ball?  thanks for any brain biscuits!

Comments

B P (not verified)

Hi Deb

There is a company called Hague PDB that make yarn winding machines in different sizes. I think they sell a model that winds balls of 500g/1 lb. They are based in the UK though, so perhaps there's an equivalent machine made in the US.

Hope you find something that works well!

Beth

 

loomroomcat (not verified)

I think Fricke makes one, they also make spinning wheels and I believe Strauch makes one, they do drum carders.  They are both wood.  I have had 2 Royal jumbo winders for years and they are excellent.  The plastic is beginning to degrade after 20 years. 

Michael White

There is a company in NC that make a ball winder they will wind one pound or more: http://www.nancysknitknacks.com/LISTgallery1.htm

I designed, build and tested an elecronic device for them with the understanding that I would build them. Bob the owner figured he could get it made in China cheaper. I did get payed for my work and I am still using the protype with my industrial yarn winder and it works great.

Michael

sally orgren

Wow, Michael!

When I was in Oregon in February, I saw one of these ball winders in operation at a knitting store, and I took a photo to remember it. I wanted to follow up later on the product when I had time. I was really impressed with it in action. (Sorry to hear as a business enterprise it did not work out for you personally tho'.) They were winding skeins into balls for customers at a really fast rate. The action was really smooth.

Do they also make cone winders too? Is there any adaptation to this device that would allow it to wind cones AND balls? (The cylindar at the top left of the image seems like it could be replaced with a cone-shaped base to switch from balls to cones perhaps?)

The employees told me the price on these things was pretty steep at a couple hundred dollars (at least compared to the plastic red-and-white hand-crank ones most of us use!).

Deb, if you get one, can I come over and try it out? ;-)

Sally

 

Michael White

When you get to be 68 (69 next month) you just move on to the next project. I in fact made two devices for them, an intellect power strip  (IPS) which when used with their counter would turn off anything pluged into it and I converted their small row counter(manual) into a automatic row counter which would count anything passing the magnet switch. Lets just say I have a few years(over 50) in electronics. Right now I am trying to get my yarn business going.

Looking at that picture I don't see why you could not take that fat dowel off and replace it with a cone shape or a small dowel to wind tubes. I don't think Bob will sent me one to play with. I will tell you why in a IM.

Michael

 

 

Mary Rios (not verified)

Deb,

I have the jumbo winder from NKK - it's a pleasure to use - I bought it about a year ago and am waiting for my new NKK skein winder to come in - I am happy with the quality of the product and the ease of use - for me, it's a MUCH different experience from those plastic winders - : ) good tools that work well.

debmcclintock

thanks for ALL the suggestions!  I am studying the photos.  Will report back on what I decide on!  I had been looking the past few years at fiber shows and just have not seen anything substantial, now it looks like I have choices!  I currently have the jumbo skein winder, which is made of plastic and when it is winding the guide wire gets catawampus (technical term) and rubs against the winder and sticks.  I've tried sanding the plastic and bending the guide winder but I've had it with nursing it, time to spend some $$$.

debmcclintock

okay Dawn, thanks for the link, let's see how this works out....weavoites, not fair bidding against me!

shroyer

Hello Michael, I had learned from a friend that they had seen this post concerning China and Nancy's Knit Knacks and I wanted to set the record straight.

Nancy's Knit Knacks makes all of its wooden products and high end electronics products in the USA. We take special pride in buying the vast majority of our materials and securing labor and assembly services from USA based companies. The ONLY things we buy from China are low end hand counters, plastic notion cases, and DC gearmotors (unfortunately, there are no American companies that manufacture low cost motors in the USA any longer).

I personally perform the final assembly and test on every wooden and electronics product that we sell.

We use craftsmen located in North Carolina, Wisconsin, and Maine to fabricate our wooden components.

We use electronics engineers in California, Florida, New Jersey and Connecticut to design and test our various custom electronics.

We do secure some specialty components (such as gears and bearings) from Germany, Switzerland, and Sweden.

All of our fabric based products are assembled in Michigan by 2 companies.

Our fishing meter based yarn meters (the plastic meter portion only, not the wood or clamps) are procured from an American company named Pure Fishing/Shakespeare. They make there meters in a Chinese factory from what I am told.

We use an American company to make all of our paper tube products and we ship them Worldwide because because India and China cannot match the quality.

All of our needle gauges and other custom plastic parts are machined here in the USA using state-of-the-art CNC cutting machines. We easily beat the Germans and the Chinese at accurate gauge making as a result.

I think you can now see, at Nancy's Knit Knacks we do not skimp on product materials or labor. We buy the best materials and secure the best labor that we can find and thankfully, it ends up with American companies 95% of the time.

If anyone has a question about our sourcing practices, or about any of our products, feel free to call me personally at 800-731-5648 or email at [email protected]

Bob Shroyer, Partner, Nancy's Knit Knacks, Cary, NC USA

debmcclintock

 

Hi, I started the thread in Weavolution because I had a Royal Wool Winder-Super Jumbo which does not work well and I wanted to replace it.  I received many comments and recommendations and your product was one of the products mentioned by folks.  I see you addressed one of the other folk's specific comment on your product source.  Good luck with your merchandise.

>>Subject: [Weavolution] Ball Winder Trouble

>Hello Deb. This is Bob Shroyer of Nancy's Knit Knacks. I thought I read a  

>post that indicated you were having trouble with our ball winder. If it is  

>not running properly, then please contact me at 800-731-5648 or at  

>[email protected]

>

>We also have a forum where you can get info on various issues and fixes for  

>the unit at www.nancysknitknacks.com/forums

>

>Thanks

>Bob

>

 

debmcclintock

Hey Dawn, I ended up buying the Jumbo 702 and am very happy with it.  I have also looked at the Strauch at MSW and am waiting to see a vender with the NKK or NNK in person but in the meantime I am happily winding away with the ball winder you recommended.  So I might not need to spend as much!  yahoo!  Thank you to all the folks who pointed me in different directions and opportunities to spend $$ regards  Deb

Submitted by debmcclintock on