I have this wonderful bamboo yarn that is smoother and silkier than silk. It's also incredibly luminous. I decided to weave it into fabric for a loose fitting tunic as a jump on Christmas presents. But, I'm a beginning weaver and I'm wondering what pattern/treadling/threading I should use to 1) maximize luminosity and silky texture and 2) create a solid weave structure suitable for a top. Also, does anyone know some good techniques for finishing the fabric I make and putting it together into a garment?

Comments

Claudia Segal (not verified)

You might want to check out the classes on Weavo. Daryl Lancaster teaches and has published books that will help you. Click on the classes tab at the top of the page and check her classes. For weave structure I would suggest something with floats like a simple twill. What type of loom are you on? Claudia, Weavo co-founder

be.wierd

 

Thanks for the ideas. I did already run across Daryl Lancaster, but missed the videos. Now I just need to find a simple twill pattern book, lol. I've done advanced projects for a beginner, but right now I have none of my own resources.

I'm actually on a rented loom from the local guild:

Kyra 8 shaft table loom with folding legs,
22" weaving width. 12 dent reed, raddle
and lease sticks.

moxie3601 (not verified)

be.wierd,

Before you go too far down this road, can I suggest that you weave some small test samples and then wash them in ways that you envision washing the finished garment? A friend of mine, who weaves extensively in tencel, recently did some samples in bamboo and tencel, and was really shocked to find that they shrank much (!) more than the tencel samples -- the washed samples were about 60% of the size of the tencel samples.

sally orgren

For garments, Daryl recommends a slightly warp-dominate fabric. Another reason to sample your setts. A closer sett will make for a longer-wearing garment.

Floats allow the sheen of the fiber to be on the surface, but you don't want to select a pattern and yarn where the floats are longer than 1/4" (because on a garment, they will be likely to snag.)

If you have a specific pattern in mind, I would buy it, cut out the pieces, and plan how wide and long a warp you'll need to weave to make the garment while you are weaving up your samples. Do plan a little extra, so if you have a treadling error, you can always cut around it.

Cheryl M White

I am a big fan of Sharon Aldermans writings. Either her Design Collection or Mastering Weave stucture, has a lot of hints about weaving to bring out the best feature of a yarn. Also a lot of her fabrics are woven with garments in mind. Maybe your library or even the guild library can get you a copy? Cheryl

laurafry

Don't forget to include a hard press in your wet finishing to really bring up the shine and to help stabilize the threads in the weave structure.

If you don't know what a hard press is, I have a video on You Tube showing how to do that as well as cold mangle.

cheers,

Laura

be.wierd

In terms of washing...my instructor advises everyone to handwash pieces in cold water with dawn, then air dry. So, that's what I've been doing to sample to test for shrinkage and hold. But, from the posted comments, it looks like you folks process the material differently? Why? Do you use different processing methods for different pieces?

Also, if someone could point me in the direction of those videos for hard press, cold mangle and blocking that'd be great. I'm having trouble finding them on YouTube.

Cheryl M White

A lot of handwovens are handwashed, but that is not a hard and fast rule. I wash my handwovens according to their final use and fiber content. Cotton towels and garments that are going to be machine washed and dried, get the same processing for the cloth. I don't want towels that I sell to shrink the first time someone throws them in a machine with warm water!! I also wear my tops and I like to wash them in the machine. Wool needs to be handled carefully, but sometimes a little fulling is the desired result, so into a machine it goes. Also woolens need warm water to remove the spinning oil added during the manufacturing process, even if you are hand-washing. There are some excellent books and articles on wet-finishing. I would recommend reading some of those. Also make enough samples so you can wash your cloth in different ways and see what is right for you. Cheryl

laurafry

Here is my You Tube channel:

http://www.youtube.com/user/LauraAnnFry1

Wet finishing is the process that brings the woven web to it's final state.  Quite often the wet finishing process can be more 'harsh' than future care and cleaning.

For example, for cotton I wet finish with hot water, then care instructions say to use warm.  Wool may be agitated in order to full it, then care instruction are to hand wash.

cheers,

Laura

cottageweaver (not verified)

Daryl Lancaster has a good article on sewing with handwovens in the latest Threads magazine - November 2012, Issue 163.  Well worth reading!

Cheryl M White

I don't subscribe, but I am glad you mentioned this issue-it is a good one

Thanks,Cheryl

Artistry

Hi, Cut the pattern pieces out of muslin and sew them up and adjust to make sure the garment fits you. When you cut the cloth it will want to unravel. Some people use a fine line of FreyCheck on the edges, available at sewing stores, ( some people hate this stuff try it on a swatch!) I personally take the piece directly to my sewing machine and do a zig zag along all the edges. I do this twice. Cutting and sewing your sample piece can be part of your sampling so you can see how it behaves turning corners, etc. Or course, sergers make quick work of much of this. I am not an expert garment maker but the above has worked for me.

sandra.eberhar…

The shiny surface and lovely hand of bamboo is because the fiber surface is very, very smooth.  Cotton has textured fibers, wool has crimp, bamboo has none of this texture.  This does make it a little more challenging to work with.  Knots have to VERY secure, or they may pull out under tension.  If you want to cut it for clothing, try cutting one of your sample pieces to see if you need to secure the cut edges to keep it from unraveling explosively (done it, seen it)  I made some bamboo/silk yardage that I had to sew around each pattern piece to secure the edges.  

Submitted by be.wierd on