I was having trouble with one of the threads on my rh loom, towards the far end. When I finally figured out what was going on, it turns out the heddle is cracked, right at the hole.

Anyone else have this problem? Can I glue it? What type of glue?

Claudia

Comments

Caroline (not verified)

Not sure what you could do while the heddle is still on the warp, beyond taking it gently to finish the project.

I would not suggest superglue - too many things could go wrong! And it doesn't glue many modern plastics.

If this looks funny its because I cannot see the end of the box and don't want to lose half of what I write.

There is a special plastic glue, and of course cannot find it when I want it, grrrr, but it handles all the plastics that you normally

don't expect to be able to fix -  I found it in my hardware store and grabbed it - then put it in a "safe" place, ;))))))!

All I can remember is that it came from the States.

Remember that "plastic" covers all sort of synthetic processes and ingredients.

Good luck with fixing it!

One other thought - if a bit actually comes away could you use kneadable resin-based putty to make the missing bit - like the stuff modellers use, or you use on car bodies?

djfiberarts (not verified)

Yeah, I think a plastic glue would be best too. Home Depot must have something. We live at HD.

I've noticed that I can't see the words to the right of the screen either.

DJ

Thumper70 (not verified)

I think that while you're still working the piece . . . . a segment of a fine drinking straw stuffed in the hole ought to prevent snags & warp breaks. if that's not handy - a piece of stiff card rolled around a tooth pick ought to do the same.

 

Submitted by Anonymous (not verified) on