I am a newbie. I have a 4 harness newcomb loom and am tryiing to weave rag rugs.  I just rewarped it in a 4321,4321... I am treadling 1234,1234...  Im having problems with the weft going around the end warps as it should.   What am I doing wrong?

Comments

Claudia Segal (not verified)

If you are trying to achieve plain weave I suggest weaving 1-3 together and 2-4 together. Rugs need to be beaten very hard. Do you have a photo to share? Can you describe what is happening a bit More Claudia

Martha

The end warp can go 3 or more rows without weft wrapped around it.  Shouldn't ithe weft wrap around one of the two outside warp evey row?

Dawn McCarthy

Sounds like you have tied up for a 3/1 twill - which will cause ends to skip 3 weft picks.  This is not a stable weave for rag rugs.  A 2/2 twill would be better (treadle 1 to shaft 1 & 2, T2 to 2 & 3, T3 to  3 & 4, T4 to 4 & 1) although even better still, as Claudia suggested you can use plain weave! = T1 - shafts 1,3 and T2 to shafts 2,4, or something nice for rag rugs is a tie up of T1 - 1,2 and T2 - 3,4, this creates a thicker line of warp against the thickness of the rag weft (T being the treadle 1 thru 6 and you would tie a cord from at least two shafts to each treadle). Hope this helps!

Dawn

Alison (not verified)

It sounds like you may have direct tie-up and are weaving a 3-1 twill rather than a plain weave.  Is that what you're doing?

As Claudia suggested, try changing your treadling.

steve104c (not verified)

The threading is good. You just need 2 treadles. Tie harnesses 4&2 to treadle 3 and harnesses 3&1 to treadle 4. Or you can also tie harnesses 4&2 to treadles 2&3and harnesses 3&1 to treadles 4&5. I've got bigger feet and my foot fits better on two treadles.  Either way you will be lifting two harnesses at a time and will be weaving a plain weave. I use the middle treadles when tying up less than the ten harnesses I have. Looks uniform and since I sit on the middle of the bench, the treadles I'll be using are right in front of me.  I'm thinking you have 6 treadles, since you have 4 harnesses. Hope this hasn't confused you........Steve.

Submitted by Martha on