I am always searching to improve the drape or hand in things I weave.  Except for a series of undulating twills with a bamboo weft, I'm never satisfied.  I try various weave structures, try to lighten my beat.  When weaving myself an overshot shawl, I took the first try off the loom (otherwise flawless) and gave it to a friend as a lap robe because I didn't like the drape.  I wove a second, same warp & tabby, my own handspun wool weft, and it was wearable but not 100% pleasing.  The problem is worse on things woven on my big Macomber, but it's also true of things I weave on the baby wolf.  Even the shadow weave yardage I'm doing now, 24 epi, fine cotton, & lightly beaten so that I can see light through it -- feels stiff to my hand, as does an 8h 20 epi fine wool & mohair shawl I just took off the baby wolf.  How do I improve drape?  Work only in bamboo?

Comments

Joanne Hall

The weaves you have tried are based on plain weave, which is not the best choice to get what you want.  Try some twill weaves.

Joanne

laurafry

What does the cloth feel like after wet finishing?  Everything coming fresh off the loom will feel stiff.  After wet finishing, and possibly a good hard press or cold mangle, the drape will improve considerably.

If you have access to a guild library, try to find Magic in the Water so you can see - and feel - the difference between the loom state and finished cloths.

cheers,

Laura

mneligh

As mentioned above, various undulating twills with a bamboo weft are fine, but an 8h wool & mohair twill is stiff.  Wet finishing helps, but I still think there's room for considerable improvement.  For example, after lightly fulling and brushing the 8h twill wool & mohair shawl, when the shawl is placed around the shoulders, the bottom of the shawl sticks out straight instead of following the body's curves.

Sara von Tresckow

How thick is your yarn?

Finer yarns will give a better drape, thick yarns have a harder time bending gracefully.

debmcclintock

there is an impolite term for it.... designer burlap

it just means that the thickness of the yarn affects the drape of the cloth in a bad way, it looks wonderful but the hand definitely is heavy, that worked well for the Chanel jackets of the 50's and 60's but is too heavy for today's styles.  Sara is right, the finer yarns drape better, sett is tough to figure out

laurafry

Unfortunately adult mohair is thicker and stiffer than, say, kid mohair.  If a weaver wants to build lots of drape into their cloth they would do better to start with a fibre/yarn that is inherently limp, like the rayon family.  That said, it all depends on how the fibre has been prepared for and spun.  E.G. the Silk City Bambu 7 or 12 has a great deal more drape or limpness than the 2/8 (or 8/2) tightly twisted bamboo from Maurice Brassard and Halcyon.  This yarn is much stiffer simply due to the much higher twists per inch and will not drape in the same way as the Bambu.

For more info on twist as it relates to yarn, people can go to my blog and click on the fibre characteristics label.

http://laurasloom.blogspot.com

cheers,

Laura

mneligh

I agree that the thicker yarn for the same sett is stiffer, but some of the pieces in question are quite fine, and "gauzy" in texture in that you can see light through them.  Two "rugs" were woven on same undulating twill warp.  The bamboo piece draped beautifully, but the cotton not so well.  The yarns had the same number of wpi.  The same is true of the two overshot pieces on the same warp -- the handspun was ok, but the cotton was stiff.  So I think my issue is the yarn.  Since my handspun is "loftier" per diameter than commercial cotton, it makes sense that it would drape better.    I'll try "unspinning" commercial cotton.  Is there a source of 10/2, 5/2, & 3/2 cotton that is not highly twisted?

Bonnie Datta (not verified)

in addition to the expert advice above I would add that irregular denting in twills enables better drape.  So if I've decided that 12 EPI is right for a twill, I will dent it [2,2,0,0] in a 12-dent reed.  The tightly-sett ends help prevent the weft from packing in as much, and the finished piece has very slight warpwise ribs that seem to add to the drape.  The denting doesn't wash out but it does become more gradual.  This works well with a broken 4-shaft twill [12342143...] where the structure naturally groups the ends into fours.  Denting patterns can correspond to the twill structure, but if they don't some lovely curvy diagonals can arise that I like very much.

Bonnie.

 

Joanne Hall

Depending on what you are weaving, the 10/2 can be ok, but 5/2 and 3/2 are a bit thick for making garment fabrics.

Joanne

Sara von Tresckow

Honestly, 8/2 cotton is the thickest I consider, and that is only for dishrags and other coarse fabrics. It is already too coarse for towels with a nice hand.

10/2 and finer will produce "real cloth".

3/2 and 5/2 are either for placemats and potholders or lazy weavers.

Mandy Heggtveit (not verified)

In my humble opinion the unpleasant hand of a fabric often is the result of a combination of too close a set and relatively high number of ppi. If this happens the yarn has no way to 'bloom' during the finishing process thus making the fabric stiff.  In other words, try various sets and don't beat to square while you are weaving.  The squaring will happen during the finishing process.

Karren K. Brito

Finer  and slinkier yarns such as silk and tencel will make a cloth more supple but so will reducing the sett. It may look like burlap on the loom but after finishing may be just what you want.  Force your self to a lighter beat; count the# of picks per inch and keep it to what you need.  There are several tricks to a more open weft placement-- beat on a closed or changed shed.  Squeeze don't beat.  Use visual clues for the placement.

I usually make cloth for wearing and prefer a much open  sett than is generally reccommended in the US. But the real answer is make samples to get the kind of hand you want with the yarns you want to use.  Put on a short warp for sampling at a sett you think is appropriate, weave a foot or so and then cut it off the loom and wash and finish it.  Evaluate.  Do you want it drapier or tighter,  it is quick to resley the warp and try again.  Or would a finer weft or lighter beat make it better?  Keep experimenting until you get what you want.  This is why each weaver's cloth can have a different character, each of us has different thing we want from our cloth.

Eva (not verified)

I have to admit that sometimes I compromise, depending on how important the drape is compared to the overall design and appearance of the cloth.  For example, Shadow Weave is one of my favorite weaves and it's mostly a plain weave structure, that already makes it more challenging to design something that will drape well.  I tried weaving Shadow Weave scarves with different yarns and rayon chenille was perfect for a nice drape.  But I've used it with pearl cotton too, including 5/2, 10/2 and 20/2, and tried different setts.  No doubt, the 20/2 and a wider sett was best for drape but the Shadow Weave pattern showed better wtih the thicker yarns.  I wove some scarves using the 5/2 anyway because the pattern looked so beautiful with the sheen of the pearl cotton.  Wet finishing helped even if it wasn't that great and I wore one of the scarves throughout the winter.  As a sort of happy ending to this long story, the more I wore this scarf, the better the drape became.  

Eva Stossel :)

Cally (not verified)

I find that a slightly warp-faced fabric often has a better drape than a balanced weave, especially with twills. That is, the cloth will drape better if your epi is greater than your ppi. It also helps to use a finer yarn in the weft than in the warp.

Cally

Joanne Hall

I have an additional comment on this subject of drape, size of thread and sett.  I just returned from the conference of the Northwest guilds in Oregon.  I viewed up close, the garments which were modeled in the fashion show.  Some of the garments were woven in finer threads and closer setts and they looked very nice in the exhibit after the modeling the evening before.  But some of the garments were woven in thicker threads with setts less than 20 epi.  A number of these garments had numerous pulled threads, which probably got caught on ear rings or other pointy things during the modeling.  So, here is another reason to use finer threads and a sett close enough to hold the threads in place.

Joanne

Submitted by mneligh on