My loom is set up in the living room which currently has carpet.  As part of a major remodel, we need to replace the floors in several rooms.  We have hardwood in the kitchen/family room and I would like carry that look throughout the rest of the rooms.  Visually, hardwood would look best, but I worry about comfort and noise,  The ceilings are vaulted in the living room, stairwell and open loft, and I fear that the large room will feel cold and drafty with all wood.  I also am afraid that sounds and vibration from my computer-assisted loom will echo in the space. 

We have a few options:  1) replace carpet in the whole space as it is now; 2) use hardwood in the entry and hallway and keep carpet in the L-shaped/living dining room; or 3) use hardwood everywhere with area rugs. 

With option 3, I know we would want an area rug in the center of the living room, but what about under the loom?  Wood would be easier to clean, but would an area rug help dampen the vibration and sounds from the loom when I am weaving? 

I keep going back and forth weighing pros and cons re appearance, costs and function for each option.  Any thoughts that will help me make this decision?

 

 

 

 

Comments

SallyE (not verified)

I'm a big fan of hardwood floors, and our allergies are part of the reason.  They are easy to keep clean, especially from spills.  I would never even consider buying a house with wall to wall carpet.

But under the loom, you could put an area rug to help dampen the sound.   The other option would be to put the loom on some rubber mats to keep it from resonating the sound around the room, and they would also help prevent the loom from walking.  I've seen some chef mats at places like Ocean State Job Lot and Wallmart.

And, with a smooth flooring like wood, I can move my looms around easily.  I just lever up each corner in turn and slip an old sock under and then just push it where I want it.  You can't do that with carpet.

 

DebD (not verified)

We moved into a house with woodflooring throughout the main floor.  It also has a cathedral (faulted?) ceiling in the family room where I keep my loom.  I hate it.  I know wood floors are supposed to be good for allergies, but they are cold and noisy.  I'm also developing a lot of problems with my feet.  I've been trying to wear padded slippers but my feet are still in pain by the end of the day. Some days I have trouble walking by middle of the day if I'm up a lot - and I'm not even 50 yet!

Anyway, the loom seems to collect a lot of dust bunnies, so I like the idea of using an area rug there.   I'm slowly putting in large rements in the other parts of the house.  That way we can easily take them up when we move.

SallyE (not verified)

My house does not have vaulted ceilings, just regular 8.5 foot ceilings.  That would certinally make a difference. 

My approach is to put the looms on the wood floor and put rugs where I walk.   Dust bunnies are easier to clean up from a wood floor because you can't easily get the vacuum under the looms, but a dust mop is easy to use there.

 

Sara von Tresckow

Hard surface flooring is much easier to keep clean than carpeting when using the space as a weaving studio. I have hardwood at home and industrial carpet at the store.

An area rug or two and a dust mop are all I need for the home studio while the shop needs to have the looms moved around so I can get the lint off the carpet - the carpet is very light, so I can see just what colors are on the loom by the lint collecting underneath.

Drafts need to be approached by apprasing the room and using curtains and/or room dividers to keep the airflow down.

As for foot pain caused by wood floor - I'd look into what is under that wood floor. The wood itself gives underfoot and is preferable to concrete - but if the wood is somehow just thin strips laid over concrete or some other hard surface, this is what is causing your foot problems. Many years ago I taught in an older school and the teachers competed for the older, draftier classrooms in the main building for their wood floors - squeaks and all - because the leg pain from the vinyl tiles laid over concrete in the newer annex gave one terrible foot pain.

mneligh

I'm with Sara & SallyE on this one.  If you think dust bunnies are bad, imagine where the same dirt goes on carpets, only it doesn't get removed easily like the dust bunnies do! I'd hate to have to clean loom litter off carpet all the time.

What you don't want to do is use Pergo or some similar laminate under the loom.  Even my big Macomber skitters on that stuff, and the dog won't walk on it.  My other loom is on hardwood, and though light, stays in place better than the Mac initially did.  To prevent skitters and absorb shock, use some sort of rubber pad -- horse trailer or stall pads, or maybe those pads used in nursery schools that look like puzzle pieces. Conveyer belting or commerecial chef mats would also work under the loom feet.  If you want, you can then put your throw rug over that.

kerstinfroberg

and "walking loom", use Stadig loom feet - can be found at glimakrausa (scroll down a bit). (There may be other sellers in the US - being from Sweden I wouldn't even look ;-)

SallyE (not verified)

Really, you dog won't walk on Pergo?!   How interesting!   It may be a new niche market for them!

celtinbirks

Hi DebD

Several years ago, I moved from a house with w to w carpet to a large one with lots of hard surface floors. I ended up with hurting feet like you several months after I moved there. I used padded slippers, but it didn't help much. I ended up getting plantar fasciitis. It was eventually cured with some firm arch supports. After that, I just bought a pair of Birkenstock sandals that I only wore inside. With the good arch support that Birkenstock has, I lived in that house for 8 more years without any more foot pain unless I forgot to wear my Birks and walked around on the hard floors for hours. Hope this helps.

Candace

planttapestry (not verified)

I'm curious for all of you recommending wooden flooring,--do you have quiet / texolve heddles or noisy metal heddles? 

Even in my carpeted living room with drapes and upholstered furniture, my loom noise bothers me quite a bit. I do have metal heddles on my Mighty wolf.

We are now preparing to move the looms to a refurbished bedroom/loft area and are trying to decide on flooring. 

Other than the concern about dust bunnies, are there other reasons to avoid carpeting? 

Thanks

ReedGuy

Hardwood, and wood in general, is not a conductor of heat, it's an insulator. I would think it would be a good choice. Some people even use European larch for flooring. But if your in the US or Canada you would likely go with hardwood since it's growing in the woods around us.

SallyE (not verified)

In my house we have a lot of allergies, so carpets are out.   There is no way to really get them clean.   We do have area rugs, which we can take out and have cleaned, and can clean under.  New carpeting usually smells for awhile - that chemical smell. 

I've got both metal and texsolv heddles on my looms.  I prefer the metal because they slide on the heddle bars so much easier, but the noise doesn't bother me at all.   But we live across from church that make a LOT of noise - so my threshold is high.

 

SallyE (not verified)

In my house we have a lot of allergies, so carpets are out.   There is no way to really get them clean.   We do have area rugs, which we can take out and have cleaned, and can clean under.  New carpeting usually smells for awhile - that chemical smell. 

I've got both metal and texsolv heddles on my looms.  I prefer the metal because they slide on the heddle bars so much easier, and the noise doesn't bother me at all.   But we live across from a church that makes a LOT of noise - so my threshold is high.

 

Artistry

Planttapestry, The only other thing I can think of right now is ease of movement of your looms. I prefer hardwood floors and have them in the summer house. It's really easy to move looms around. SallyE had a nifty way of moving looms on this surface in post#1. Sara mentioned she had industrial broadloom in one of her studios where she moved her looms, I wonder if that is harder than her hardwood floors? I also have carpet, a thicker than broadloom , in one of my studios at home. One loom , a baby wolf has a stroller , no problem. . Another, a 6ft. X6ft leclerc tapestry loom will not budge, I have with effort moved it on hardwood . In the Spring, the carpet is going and hardwood will be going down:) Hope this helps Cathie

dibgar

It has been several months since my original post.  After considering all of the comments last fall, we ended up putting hardwood throughout the main level.  I love the visual flow from room to room in our "new" space.  I am just now getting back to weaving after the remodel.  My looms were under cover for several months, and I wove my first project yesterday.  These additions to this discussion thread came less that 24 hours after turning on my computer loom for the first time since December. 

Right now, we have felt-covered furniture pads under the feet of my AVL V-series loom.  They really help when I have to reposition the loom.  I did not experience any "walking" with my first small project, but I'll see what happens if I have to beat more vigorously in the future.  We have a large area rug in the middle of the living room, but I hope I can avoid one under the loom. 

I had worried about echoing sound with so much hardwood and vaulted ceilings, but I was not especially bothered by it yesterday, even without much furniture or anything on the walls.  After the new sofa arrives and I hang a few tapestries, I hope noise will be even less of an issue.

Finally, regarding sore feet, I have a history of foot and ankle problems, so I avoid going barefoot most of the time.  I have a pair of Birkenstocks that I can slip on and off easily.  They give just enough arch support for waking around the house on the hardwood.  I put on my more supportive shoes with good orthodics when I have to stand at my warping wheel for long periods, but I don't like a heavy shoe when it comes time to treadle.  I have a pair of narrow sandles that I wear when I weave on a loom with closely spaced treadles such as my Baby Wolf.  Even though spacing is not an issue with the single treadle of my e-lift, I still like a lighter weight shoe for the repetetive lifting of one foot or the other.

Thanks again, to everyone who shared their experiences.

Darenlibby

If you want to use some another flooring options in weaving room, there are many otpions, and I would say the flooring insallation is very weasy task, so you can install harwood flooring or install some another carpets also. Get some more idea from icustomfloor.com

 

Submitted by dibgar on