I am glum.  I tried so very hard not to resort to Evil Knots to get a pair of warp threads fixed, but I couldn't quite get the hang of repairing without out it!  And on top of that, I have a few floats (warp and weft) that came about before I realized the warp threading error.  Anyone have a favorite source of "here's how to fix weaving errors" information?

Comments

claudia (not verified)

My two favorite sources, besides asking on Weavolution, are Peg Osterkamp's books and Deb Chandler.

Can you send a couple quick pictures and maybe we can help with specific answers. Uploading photos has been improved. If you click on the icon, then click on browse and find the photos on your computer. Click on Upload then you can adjust the photo size in the box for width and height next to the preview box.

Hope that helps.

Claudia

Sara von Tresckow

In a textile mill there are employees hired to mend fabrics as they come off the loom because in a long bolt of cloth there are bound to be a few skips and/or broken warps.

1. Leave tails wherever you can. These can be needled back into the fabric before wet finishing.

2. Those annoying little floats can also be needlewoven carefully into invisibility when the cloth is off the loom and prior to wet finishing. 

hlf (not verified)

I am past the bad spots, but when I pull it off the loom I'll take pictures and post them for feedback.  I'm bound and determined to make more of these scarves - I love the pattern! - but I need to know how to fix my stuff.

hlf (not verified)

Well, I'm not quite past the bad spots.  I did a whole blog entry on everything I've been learning through mistakes on this scarf, and I'm really at a loss on the tension situation.  How one thread which is NOT crossed is getting tighter and tighter as I weave, I have no idea.  

errors in tension

w178 (not verified)

hlf have you tried to follow the thread all the way back to the warp beam?     Heres what I do if I have a problem like this and it takes a bit of curage at first I just brake the end and tie a new bit of the thread atach it to the woven part and continue till the end and before wet finishing I "mend"all faults as it would be done in a mill.

I try as hard as I can to weave a peics as good as I can but I am not a machine so I do make mistakes and that is why I love hand woven fabrics becouse the inperfections make it perfect.

 

I hope this helps. gougy

w178 (not verified)

BTW the scarf looks great gougy

tommye scanlin

 could that one warp be snagged at the heddle, having possibly gone through it the wrong way creating a drag?  BYW, love the block order & color.

Tommye

hlf (not verified)

Nope, I've checked to see if its snagged.  I thought about it last night and I think I know what's happened (partly).  I when I broke that warp thread to fix the threading error and tied it back in, I did not take in to account upcoming warp take-up, and so that one thread will get tighter and tighter until it breaks or until I Do Something about it.  I'm considering either unwinding the warp so I can retie that section, or trying one more time to do a proper warp repair (which I need to learn to do anyway). 

claudia (not verified)

Having been where you are, I would suggest doing the repair rather than unwinding the warp. I did that once, about 6 months ago, and it made things much, much worse.

Just my 2 cents. Keep us posted.

Claudia

kerstinfroberg

A trick when doing a planned (as in: you see a knot coming up, and want to take out that end) warp repair: thread the new end through the heddle and reed. Attach to the fell with a pin. Weigh the new end at the back. Weave a few picks with *both* ends in place, then cut the end with the knot. Take that end back, to hang off the warp beam.  This way the reapir is done on loom - no need to mend in the ends after weaving.

It *can* be done with a snapped end, too, but that takes more work. (If the end snaps at the fell line, there is no way to get out of mending afterwards...) So: thread the new end theough heddle and reed, attach with pin. Weight new end. Keep control over snapped end: when the new end rises, make the snapped end rise. When the new end lowers, make the snapped end go down. too. After a few picks (same as above) you can let the snapped  end go. The "mending" is done on loom, but after cutting off the tension will have to be corrected - but no needleweaving is needed.

dorothystewart (not verified)

 What a great piece of advice for repairing broken warp threads on the loom !

I have printed it out and will keep it close to my loom ! I hate trying to needle in the ends once the project is off the loom.

Many thanks

Dorothy

Ellen (not verified)

I second that. That's the way I have learned and used lots of times.

And it is always better to have a "controlled" break than an accidental one.

tien (not verified)

Thanks Kerstin!  That trick for snapped ends is really handy for me, since I usually weave with very fine yarns where needleweaving is just not an option.  I'll have to start giving it a try.

laurafry

I used Kerstin's technique for repairing the knots in the afghan warp.  Generally it worked really well, and best of all - no repairs once the cloth is off the loom.  :)  Well, almost no repairs.  I have a few oopsies to fix. 

Cheers,

Laura

kmrussell (not verified)

Does anyone know how to deal with a missed warp thread in a dent? Each dent is suppose to have 2 threads but after I started weaving I realized one dent only had one thread. It leaves more space around it than the others. Will it pull in when washed and dried? Is there a way to fix it? Or should I just cut the first towel off and re-thread the reed and do another tie-on? I'm self-taught and I always seem to come up with things I've never seen before. Thanks. 

laurafry

The only way to 'fix' a missed dent is to take the threads out of the reed and re-sley.  No, generally the space won't fill in, entirely.  otoh, if the towel is for yourself, I'd say to go ahead and finish the towel, then cut off and re-sley.

cheers,

Laura

Ravensbarn (not verified)

 

I am trying to weave doubleweave logcabin .. I started my project and warped it when later I found the pattern in Handwoven of this year. However I dont have the same weight of yarn nor the same reed....sigh..

The pattern calls for 20 (10 ends doubled) ends per inch in a 10 dent reed.  I have 8 ends per inch and a 6 or 12 dent reed.  I am trying the 6 dent reed and sleying the reed  a repeat of 16 ends  (2-2-4-2-2-4)   This has reduced the width of my project..more of a car rug than a blanket.   I wondered if I included more empty dents if it would affect the doubleweave in any way.

Thanks for any help you can provide

 

sally orgren

Your fabric could become sleazy, meaning each layer might become more open than what you might desire, and in unexpected places.

The first thing to note, since you are not using *exactly* the same fiber size asked for in the magazine, are you sure 16 epi (8 per layer) is the right sett?

If so, I would just add more warps to get the desired width at this sett. You can add from each side of the project to keep it balanced within the width of your loom. If this is a short project (less than 5 yards) it is pretty easy to beam the warp back toward the front, add the desired warps, rebeam the whole enchilada under tension, then thread those new warps, tension, and weave. (I am assuming a back to front warp method)

Does that make sense? It is worth it if you want to make a blanket to add the extra width now. The alternative is to weave it 2x as long, and stitch two lengths side by side to get the desired width.

 

Dawn McCarthy

I agree with Kerstin, that system of both ends being woven works really well, unfortunately the missed dent (especially from a weavers eye) will most always be a glaring error, wet finishing will lessen but rarely eliminate.  

Dawn

bloominloom.wordpress.com

Dawn McCarthy

Sara - I spent time as an apprentice doing exactly that - unfortunately it creates an "eye" for any faults in the fabric, making one very critical of your fabric (not sure if that is always a good thing)

Dawn

bloominloom.wordpress.com

Cheryl M White

I think new weavers want the warp to be perfect, and yes we should all strive for even tension, and repair free warps...But the reality is that the finished product is the prize, not the warp on the loom.  I have seen some pretty amazing collections of threads hanging off the back of looms, (and some have been my own), and when the cloth is finished, and the ends woven in, no one knows about all that stuff. 

I use empty cones from yarn for weights.  If you have to make a repair, thread your end through the top of one cone, wrap it around a second cone, and push the two cones tightly together. The top cone will keep the tension for you, and you can just unwind the yarn from the bottom cone as you need.  Hope this helps someone out.

Cheryl 

Submitted by Anonymous (not verified) on