Is it possible to do Finnweave on a 2-shaft loom? I have a Nilec, like a Dorothy table loom only it has just 2 shafts. Last night I found this

http://www.allfiberarts.com/library/gallery/bltan-pickup.htm

which explains how to do it on 4 shafts. But is it possible, using pickup sticks and/or string heddles, to do it on a two shaft loom?

I was so enthused by the patterns in the backstrap loom group and I would love to be able to reproduce them. But all I have is the little 2-shaft loom.

 

 

 

Comments

CraftinSusan

A 2 Shaft loom is like a Rigid Heddle loom.  There is a book called Textures and Patterns for the Rigid Heddle Loom by Betty Davenport.  Using a pick up sticks we can weave a variety of things on our RH/2S looms.

So, yes, using pick up sticks or string heddles we can do double weave or any 3S or 4S pattern on a 2S loom.

Right now on the Rigid Heddlers group we are weaving  3S Twill patterns.  You could weave the same patterns on your 2S loom.

For the pattern 321, working from right to left, thread Shaft 1 and then Shaft 2.  For Shaft 3 bring the warp thread to the warp beam without going through any heddle.  Repeat for the width you want.  Wind the warp and tension the loom.  Now using a pick up stick or string heddles, pick up the Shaft 3 warp thread.  To get Shaft 3 leave Shafts 1 & 2 in neutral and turn the pick up stick on its edge or lift up the sring heddles.  I prefer to use a pick up stick because it will stay on its edge therefore leaving the shed open so I can use both hands for the shuttle..

For 4 shaft patterns, you will have to add another warp thread and another pick up stick.

I forgot to add that I have the same loom as you do.  I love that my LeClerc Voyageur loom and my Nilec can use the same reeds.

thegnu (not verified)

Thank You Susan! I am beginning to understand now how I can do weaves that call for more than 2 shafts. I wish I had the Davenport book. So let me see if I have this right. I warp front to back, so I sley the reed and then,moving from right to left, I put the first thread in Shaft 1, the second in Shaft 2 and the 3rd just straight through to the back beam.

When weaving from "Shaft 3" I just put the other two shafts in neutral and lift the threads with a pick up stick on it's side.

I haven't done this yet, but I think I understand it.  But what I want to do, if possible, is a pattern with this 3rd shaft thread. Like a zig zag or even a little rabbit or something. Is there a way, with the Shaft 3 thread in a contrasting color, to just pick up the threads according to a pattern, which would vary every time? 

Finn weave, which is what I found on the Internet last night, is a double weave. Maybe you have to have a double weave to be able to make patterns with contrasting color?

 

 

 

 

 

 

 

 

 

thegnu (not verified)

Thank You Susan! I am beginning to understand now how I can do weaves that call for more than 2 shafts. I wish I had the Davenport book. So let me see if I have this right. I warp front to back, so I sley the reed and then,moving from right to left, I put the first thread in Shaft 1, the second in Shaft 2 and the 3rd just straight through to the back beam.

When weaving from "Shaft 3" I just put the other two shafts in neutral and lift the threads with a pick up stick on it's side.

I haven't done this yet, but I think I understand it.  But what I want to do, if possible, is a pattern with this 3rd shaft thread. Like a zig zag or even a little rabbit or something. Is there a way, with the Shaft 3 thread in a contrasting color, to just pick up the threads according to a pattern, which would vary every time? 

Finn weave, which is what I found on the Internet last night, is a double weave. Maybe you have to have a double weave to be able to make patterns with contrasting color?

 

 

 

 

 

 

 

 

 

CraftinSusan

Yes!  You have it right for threading your 2S loom for a 321 (3S) pattern.

I have not done Finnweave but I have done Double Weave on my Rigid Heddle loom.

<But what I want to do, if possible, is a pattern with this 3rd shaft thread. Like a zig zag or even a little rabbit or something. Is there a way, with the Shaft 3 thread in a contrasting color, to just pick up the threads according to a pattern, which would vary every time>

Yes, you can also do this by using a pick up stick.  If the pattern varies from row to row then we pick up the warp threads in front of the heddle and form a shed.  After throwing the shuttle we remove the pick up stick and beat the weft in.  Then we use the pick up stick for the next row pattern.

thegnu (not verified)

So, let me get this right,  I pick up the contrasting color warp threads for the pattern (the "3rd" shaft) in FRONT of the heddles and reed and throw the shuttle? then remove the stick and place the next pick in. Then do this over picking the different contrast color threads from the "3rd" shaft with the stick.

 

CraftinSusan

If your pattern is varying than, yes, the pick up stick is usally put in front of the heddles or in your case the reed.  I forgot you have a 2S loom and not just a RH loom.  There is no reason why you can put it in back of the heddles but it is easier to reach when the pick up stick is in front.

Generally when we are using the same pick up pattern over and over we put the pick up stick in back of the heddles.  That means we don't have to remove the stick every time and we can advance the warp while leaving the pick up stick in.

You can always have two pick up sticks.  One behind the heddles to pick up all the Warp Thread #3 for, say, plain weave or twill and still have another pick up stick in front for those 'special' patterns.

thegnu (not verified)

Great. Thanks so much, Susan. I'm going to try it out ASAP. Unfortunately it is Monday and I have other responsibilities, so it might be the weekend before I get to it.

Submitted by Anonymous (not verified) on